Dynamite Friction 4504-31090 Disc Brake Kit - Front and Rear
Brake Kit for BMW X5 and X6
Restore braking performance with the Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit, part number 4504-31090. This front and rear disc brake kit is built for 2007-2010 BMW X5 and 2008 BMW X6 applications, including the X6 production date through 10/2008.
Key Features
- Complete brake kit with GEOSPEC coated rotors and 5000 Advanced brake pads
- Fits 2007-2010 BMW X5, front and rear
- Fits 2008 BMW X6, front and rear, vehicle production date to 10/2008
- Rotors use a G3000/G11H18 cast iron specification for OE-style durability and stability
- Non-directional rotor finish supports even pad bed-in and smoother braking
- Dry-coated rotors arrive ready to install without oil removal
- Brake pads are post-cured, scorched, and fitted with rubber-steel-rubber shims for reduced noise, vibration, and harshness
- Part number 4504-31090 for easy identification
Product Details
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads line combines coated replacement rotors with advanced friction material for BMW X5 and BMW X6 brake service. The rotor coating is designed to resist rust better than conventional paint or zinc finishes, while the machined surface and balance inspection support consistent braking feel. The pads are formulated for stable friction performance and reduced initial break-in, making this kit a practical choice for BMW X5 brake replacement and BMW X6 front and rear brake service.
Part number 4504-31090 is part of the DFC GEOSPEC Rotors with 5000 Advanced Brake Pads product line, which pairs coated rotors with application-specific pad formulations for axle-level brake service.
Common Brake Issues This Kit Addresses
- Brake pulsation from worn or uneven rotors
- Rust buildup on exposed rotor surfaces
- Noise during braking from aged pads and worn friction material
- Reduced stopping consistency from heat-worn brake components
- Longer service time caused by uncoated rotors that require cleaning before installation
Installation Notes
Compatible With 2007-2010 BMW X5, front and rear, and 2008 BMW X6, front and rear, vehicle production date to 10/2008. Verify axle position and production date before ordering. The rotors are shipped dry and ready to install, and the coating is removed naturally by the brake pads during normal use. Follow OE service procedures for pad bedding and rotor break-in after installation.
Quality Assurance
DFC brake pads are post-cured and scorched for stable friction performance, and the rotors are machined to tight tolerances with 100% inspection of critical dimensions. Vented rotors are balance-checked and corrected when needed. DFC GEOSPEC rotors include a 12-month warranty against defects in material and workmanship. Part number 4504-31090 is built to OE specifications for the listed BMW applications.
Brake Kit for BMW X5 and X6
Restore braking performance with the Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit, part number 4504-31090. This front and rear disc brake kit is built for 2007-2010 BMW X5 and 2008 BMW X6 applications, including the X6 production date through 10/2008.
Key Features
- Complete brake kit with GEOSPEC coated rotors and 5000 Advanced brake pads
- Fits 2007-2010 BMW X5, front and rear
- Fits 2008 BMW X6, front and rear, vehicle production date to 10/2008
- Rotors use a G3000/G11H18 cast iron specification for OE-style durability and stability
- Non-directional rotor finish supports even pad bed-in and smoother braking
- Dry-coated rotors arrive ready to install without oil removal
- Brake pads are post-cured, scorched, and fitted with rubber-steel-rubber shims for reduced noise, vibration, and harshness
- Part number 4504-31090 for easy identification
Product Details
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads line combines coated replacement rotors with advanced friction material for BMW X5 and BMW X6 brake service. The rotor coating is designed to resist rust better than conventional paint or zinc finishes, while the machined surface and balance inspection support consistent braking feel. The pads are formulated for stable friction performance and reduced initial break-in, making this kit a practical choice for BMW X5 brake replacement and BMW X6 front and rear brake service.
Part number 4504-31090 is part of the DFC GEOSPEC Rotors with 5000 Advanced Brake Pads product line, which pairs coated rotors with application-specific pad formulations for axle-level brake service.
Common Brake Issues This Kit Addresses
- Brake pulsation from worn or uneven rotors
- Rust buildup on exposed rotor surfaces
- Noise during braking from aged pads and worn friction material
- Reduced stopping consistency from heat-worn brake components
- Longer service time caused by uncoated rotors that require cleaning before installation
Installation Notes
Compatible With 2007-2010 BMW X5, front and rear, and 2008 BMW X6, front and rear, vehicle production date to 10/2008. Verify axle position and production date before ordering. The rotors are shipped dry and ready to install, and the coating is removed naturally by the brake pads during normal use. Follow OE service procedures for pad bedding and rotor break-in after installation.
Quality Assurance
DFC brake pads are post-cured and scorched for stable friction performance, and the rotors are machined to tight tolerances with 100% inspection of critical dimensions. Vented rotors are balance-checked and corrected when needed. DFC GEOSPEC rotors include a 12-month warranty against defects in material and workmanship. Part number 4504-31090 is built to OE specifications for the listed BMW applications.
Description
Brake Kit for BMW X5 and X6
Restore braking performance with the Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit, part number 4504-31090. This front and rear disc brake kit is built for 2007-2010 BMW X5 and 2008 BMW X6 applications, including the X6 production date through 10/2008.
Key Features
- Complete brake kit with GEOSPEC coated rotors and 5000 Advanced brake pads
- Fits 2007-2010 BMW X5, front and rear
- Fits 2008 BMW X6, front and rear, vehicle production date to 10/2008
- Rotors use a G3000/G11H18 cast iron specification for OE-style durability and stability
- Non-directional rotor finish supports even pad bed-in and smoother braking
- Dry-coated rotors arrive ready to install without oil removal
- Brake pads are post-cured, scorched, and fitted with rubber-steel-rubber shims for reduced noise, vibration, and harshness
- Part number 4504-31090 for easy identification
Product Details
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads line combines coated replacement rotors with advanced friction material for BMW X5 and BMW X6 brake service. The rotor coating is designed to resist rust better than conventional paint or zinc finishes, while the machined surface and balance inspection support consistent braking feel. The pads are formulated for stable friction performance and reduced initial break-in, making this kit a practical choice for BMW X5 brake replacement and BMW X6 front and rear brake service.
Part number 4504-31090 is part of the DFC GEOSPEC Rotors with 5000 Advanced Brake Pads product line, which pairs coated rotors with application-specific pad formulations for axle-level brake service.
Common Brake Issues This Kit Addresses
- Brake pulsation from worn or uneven rotors
- Rust buildup on exposed rotor surfaces
- Noise during braking from aged pads and worn friction material
- Reduced stopping consistency from heat-worn brake components
- Longer service time caused by uncoated rotors that require cleaning before installation
Installation Notes
Compatible With 2007-2010 BMW X5, front and rear, and 2008 BMW X6, front and rear, vehicle production date to 10/2008. Verify axle position and production date before ordering. The rotors are shipped dry and ready to install, and the coating is removed naturally by the brake pads during normal use. Follow OE service procedures for pad bedding and rotor break-in after installation.
Quality Assurance
DFC brake pads are post-cured and scorched for stable friction performance, and the rotors are machined to tight tolerances with 100% inspection of critical dimensions. Vented rotors are balance-checked and corrected when needed. DFC GEOSPEC rotors include a 12-month warranty against defects in material and workmanship. Part number 4504-31090 is built to OE specifications for the listed BMW applications.
