Dynamite Friction 4504-31081 Disc Brake Kit - Front and Rear
Brake Kit for BMW 330Ci, 330i, and 330xi
Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads is a complete disc brake kit for front and rear service on select BMW 3 Series models. Part number 4504-31081 combines coated rotors and matched friction material for a direct brake service solution on 2001-2006 BMW 330Ci, 2001-2005 BMW 330i, and 2001-2005 BMW 330xi applications.
Key Features
- Complete disc brake kit with rotors and pads for front and rear service
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install without oil removal
- G3000/G11H18 cast iron rotor specification for OE-style durability and stability
- Non-directional rotor finish supports even pad bed-in and smoother braking
- 100% inspected rotors, including balance correction on vented rotors
- DFC 5000 Advanced Brake Pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
Product Details
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads line is built for drivers who want a coordinated brake service package rather than mixing separate components. The coated rotor surface helps resist rust better than conventional paint or zinc finishes, while the dry-ready design saves prep time during installation. The pad set uses post-cured friction material and shims engineered to improve pedal feel consistency and reduce brake noise. Part number 4504-31081 is a practical choice for BMW 330Ci, BMW 330i, and BMW 330xi owners servicing both axles at once.
What This Brake Kit Helps Address
- Brake pulsation caused by worn or uneven rotors
- Rust buildup on exposed rotor surfaces
- Noise from aged pads or worn shim material
- Reduced stopping performance from heat-worn friction material
- Longer brake service time from separate part sourcing
Installation Notes
Verify vehicle fitment by year, model, and axle position before installation. Clean the hub mounting surface, inspect calipers and hardware condition, and follow proper torque procedures during assembly. The rotor coating is removed naturally by the brake pads during initial use, so no extra coating prep is required. For best results, complete a proper pad and rotor bed-in procedure after installation.
Quality Assurance
Each DFC GEOSPEC rotor is machined to tight tolerances, finished with a non-directional surface, and inspected for critical dimensions and balance. DFC 5000 Advanced Brake Pads are post-cured and scorched for consistent friction characteristics. Rotors include a 12-month warranty against defects in material and workmanship. Part number 4504-31081 is engineered as an OE-style brake service kit for select BMW 330Ci, 330i, and 330xi vehicles.
Brake Kit for BMW 330Ci, 330i, and 330xi
Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads is a complete disc brake kit for front and rear service on select BMW 3 Series models. Part number 4504-31081 combines coated rotors and matched friction material for a direct brake service solution on 2001-2006 BMW 330Ci, 2001-2005 BMW 330i, and 2001-2005 BMW 330xi applications.
Key Features
- Complete disc brake kit with rotors and pads for front and rear service
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install without oil removal
- G3000/G11H18 cast iron rotor specification for OE-style durability and stability
- Non-directional rotor finish supports even pad bed-in and smoother braking
- 100% inspected rotors, including balance correction on vented rotors
- DFC 5000 Advanced Brake Pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
Product Details
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads line is built for drivers who want a coordinated brake service package rather than mixing separate components. The coated rotor surface helps resist rust better than conventional paint or zinc finishes, while the dry-ready design saves prep time during installation. The pad set uses post-cured friction material and shims engineered to improve pedal feel consistency and reduce brake noise. Part number 4504-31081 is a practical choice for BMW 330Ci, BMW 330i, and BMW 330xi owners servicing both axles at once.
What This Brake Kit Helps Address
- Brake pulsation caused by worn or uneven rotors
- Rust buildup on exposed rotor surfaces
- Noise from aged pads or worn shim material
- Reduced stopping performance from heat-worn friction material
- Longer brake service time from separate part sourcing
Installation Notes
Verify vehicle fitment by year, model, and axle position before installation. Clean the hub mounting surface, inspect calipers and hardware condition, and follow proper torque procedures during assembly. The rotor coating is removed naturally by the brake pads during initial use, so no extra coating prep is required. For best results, complete a proper pad and rotor bed-in procedure after installation.
Quality Assurance
Each DFC GEOSPEC rotor is machined to tight tolerances, finished with a non-directional surface, and inspected for critical dimensions and balance. DFC 5000 Advanced Brake Pads are post-cured and scorched for consistent friction characteristics. Rotors include a 12-month warranty against defects in material and workmanship. Part number 4504-31081 is engineered as an OE-style brake service kit for select BMW 330Ci, 330i, and 330xi vehicles.
Description
Brake Kit for BMW 330Ci, 330i, and 330xi
Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads is a complete disc brake kit for front and rear service on select BMW 3 Series models. Part number 4504-31081 combines coated rotors and matched friction material for a direct brake service solution on 2001-2006 BMW 330Ci, 2001-2005 BMW 330i, and 2001-2005 BMW 330xi applications.
Key Features
- Complete disc brake kit with rotors and pads for front and rear service
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install without oil removal
- G3000/G11H18 cast iron rotor specification for OE-style durability and stability
- Non-directional rotor finish supports even pad bed-in and smoother braking
- 100% inspected rotors, including balance correction on vented rotors
- DFC 5000 Advanced Brake Pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
Product Details
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads line is built for drivers who want a coordinated brake service package rather than mixing separate components. The coated rotor surface helps resist rust better than conventional paint or zinc finishes, while the dry-ready design saves prep time during installation. The pad set uses post-cured friction material and shims engineered to improve pedal feel consistency and reduce brake noise. Part number 4504-31081 is a practical choice for BMW 330Ci, BMW 330i, and BMW 330xi owners servicing both axles at once.
What This Brake Kit Helps Address
- Brake pulsation caused by worn or uneven rotors
- Rust buildup on exposed rotor surfaces
- Noise from aged pads or worn shim material
- Reduced stopping performance from heat-worn friction material
- Longer brake service time from separate part sourcing
Installation Notes
Verify vehicle fitment by year, model, and axle position before installation. Clean the hub mounting surface, inspect calipers and hardware condition, and follow proper torque procedures during assembly. The rotor coating is removed naturally by the brake pads during initial use, so no extra coating prep is required. For best results, complete a proper pad and rotor bed-in procedure after installation.
Quality Assurance
Each DFC GEOSPEC rotor is machined to tight tolerances, finished with a non-directional surface, and inspected for critical dimensions and balance. DFC 5000 Advanced Brake Pads are post-cured and scorched for consistent friction characteristics. Rotors include a 12-month warranty against defects in material and workmanship. Part number 4504-31081 is engineered as an OE-style brake service kit for select BMW 330Ci, 330i, and 330xi vehicles.
