Dynamite Friction 4504-31019 Disc Brake Kit - Front and Rear
Brake Kit for BMW 540i Front and Rear
Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads, part number 4504-31019, is a complete disc brake kit for select BMW 540i applications. It combines coated rotors and advanced friction pads in one package for front and rear service on the listed vehicles.
Key Features
- Fits 1997-1999 BMW 540i, front and rear
- Fits 2000 BMW 540i, front and rear, vehicle production date to 3/00
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Rotors are shipped dry and ready to install
- G3000/G11H18 cast iron rotor specification for OE-style durability and stability
- Non-directional rotor finish for more even pad bed-in and smoother braking
- 100% inspected rotors with balance correction on vented units
- DFC 5000 Advanced Brake Pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
Product Details
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads line is built for drivers who want a matched rotor-and-pad service kit for BMW 540i brake maintenance. The coated rotors resist rust better than conventional painted or zinc-coated designs, while the dry packaging eliminates the need to clean oil from the rotor before installation. The pads are formulated for consistent friction, with post-curing and scorching used to reduce initial break-in effort and support stopping performance from the first stop. Part number 4504-31019 is a direct service solution for BMW 540i front and rear brake replacement on the listed model years.
Common Brake Issues This Kit Can Address
- Brake pulsation from worn or uneven rotors
- Noise caused by aged pads or rotor surface irregularities
- Rust buildup on exposed rotor surfaces
- Reduced braking consistency from worn friction material
- Extended stopping distance due to brake wear
Installation Notes and Tips
Confirm vehicle production date before ordering for the 2000 BMW 540i, since this kit applies only to vehicles built to 3/00. Clean the hub mounting surface before installing new rotors, and follow proper brake service procedures for pad bedding after installation. Because the rotors are shipped dry, no oil removal step is required before assembly. Verify fitment against the vehicle’s brake configuration before beginning service.
Quality Assurance
Each rotor is machined to tight tolerances, finished with a non-directional surface, and inspected for critical dimensions and balance. DFC states that every rotor is checked against OE specifications, and the rotors include a 12-month warranty against defects in material and workmanship. The 5000 Advanced Brake Pads are post-cured, scorched, and assembled with premium shims to support consistent brake feel and NVH control. If you are sourcing BMW 540i brake parts, part number 4504-31019 provides a matched rotor and pad kit for the listed applications.
Brake Kit for BMW 540i Front and Rear
Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads, part number 4504-31019, is a complete disc brake kit for select BMW 540i applications. It combines coated rotors and advanced friction pads in one package for front and rear service on the listed vehicles.
Key Features
- Fits 1997-1999 BMW 540i, front and rear
- Fits 2000 BMW 540i, front and rear, vehicle production date to 3/00
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Rotors are shipped dry and ready to install
- G3000/G11H18 cast iron rotor specification for OE-style durability and stability
- Non-directional rotor finish for more even pad bed-in and smoother braking
- 100% inspected rotors with balance correction on vented units
- DFC 5000 Advanced Brake Pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
Product Details
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads line is built for drivers who want a matched rotor-and-pad service kit for BMW 540i brake maintenance. The coated rotors resist rust better than conventional painted or zinc-coated designs, while the dry packaging eliminates the need to clean oil from the rotor before installation. The pads are formulated for consistent friction, with post-curing and scorching used to reduce initial break-in effort and support stopping performance from the first stop. Part number 4504-31019 is a direct service solution for BMW 540i front and rear brake replacement on the listed model years.
Common Brake Issues This Kit Can Address
- Brake pulsation from worn or uneven rotors
- Noise caused by aged pads or rotor surface irregularities
- Rust buildup on exposed rotor surfaces
- Reduced braking consistency from worn friction material
- Extended stopping distance due to brake wear
Installation Notes and Tips
Confirm vehicle production date before ordering for the 2000 BMW 540i, since this kit applies only to vehicles built to 3/00. Clean the hub mounting surface before installing new rotors, and follow proper brake service procedures for pad bedding after installation. Because the rotors are shipped dry, no oil removal step is required before assembly. Verify fitment against the vehicle’s brake configuration before beginning service.
Quality Assurance
Each rotor is machined to tight tolerances, finished with a non-directional surface, and inspected for critical dimensions and balance. DFC states that every rotor is checked against OE specifications, and the rotors include a 12-month warranty against defects in material and workmanship. The 5000 Advanced Brake Pads are post-cured, scorched, and assembled with premium shims to support consistent brake feel and NVH control. If you are sourcing BMW 540i brake parts, part number 4504-31019 provides a matched rotor and pad kit for the listed applications.
Description
Brake Kit for BMW 540i Front and Rear
Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads, part number 4504-31019, is a complete disc brake kit for select BMW 540i applications. It combines coated rotors and advanced friction pads in one package for front and rear service on the listed vehicles.
Key Features
- Fits 1997-1999 BMW 540i, front and rear
- Fits 2000 BMW 540i, front and rear, vehicle production date to 3/00
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Rotors are shipped dry and ready to install
- G3000/G11H18 cast iron rotor specification for OE-style durability and stability
- Non-directional rotor finish for more even pad bed-in and smoother braking
- 100% inspected rotors with balance correction on vented units
- DFC 5000 Advanced Brake Pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
Product Details
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads line is built for drivers who want a matched rotor-and-pad service kit for BMW 540i brake maintenance. The coated rotors resist rust better than conventional painted or zinc-coated designs, while the dry packaging eliminates the need to clean oil from the rotor before installation. The pads are formulated for consistent friction, with post-curing and scorching used to reduce initial break-in effort and support stopping performance from the first stop. Part number 4504-31019 is a direct service solution for BMW 540i front and rear brake replacement on the listed model years.
Common Brake Issues This Kit Can Address
- Brake pulsation from worn or uneven rotors
- Noise caused by aged pads or rotor surface irregularities
- Rust buildup on exposed rotor surfaces
- Reduced braking consistency from worn friction material
- Extended stopping distance due to brake wear
Installation Notes and Tips
Confirm vehicle production date before ordering for the 2000 BMW 540i, since this kit applies only to vehicles built to 3/00. Clean the hub mounting surface before installing new rotors, and follow proper brake service procedures for pad bedding after installation. Because the rotors are shipped dry, no oil removal step is required before assembly. Verify fitment against the vehicle’s brake configuration before beginning service.
Quality Assurance
Each rotor is machined to tight tolerances, finished with a non-directional surface, and inspected for critical dimensions and balance. DFC states that every rotor is checked against OE specifications, and the rotors include a 12-month warranty against defects in material and workmanship. The 5000 Advanced Brake Pads are post-cured, scorched, and assembled with premium shims to support consistent brake feel and NVH control. If you are sourcing BMW 540i brake parts, part number 4504-31019 provides a matched rotor and pad kit for the listed applications.
