Dynamite Friction 4504-21013 Disc Brake Kit - Front and Rear
Brake Kit for 2012-2017 Kia Rio
Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads, part number 4504-21013, is a complete disc brake kit for the front and rear of the 2012-2017 Kia Rio. It combines coated rotors and matched pads in one package for a straightforward brake service on this application.
Key Features
- Complete disc brake kit with rotors and pads for front and rear service
- Fits 2012-2017 Kia Rio, front and rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Rotors ship dry and are ready to install without oil removal
- Non-directional rotor finish supports even pad bed-in and quieter stops
- 5000 Advanced Brake Pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
Product Line Details
The DFC GEOSPEC rotor line focuses on coated replacement rotors built to OE-style dimensions and cast iron specifications. The coating helps resist rust better than conventional paint or zinc finishes, while the machining process uses tight tolerances and balance inspection on vented rotors for consistent operation. The 5000 Advanced Brake Pads line is formulated for axle-specific braking needs and is finished to reduce initial break-in time.
Detailed Description
Part number 4504-21013 is built for drivers servicing a Kia Rio brake system with a matched rotor-and-pad package. The rotors are machined to OE specifications, finished with a non-directional surface, and inspected for critical dimensions before shipment. The pads are post cured, scorched, and assembled with premium shims to support stable braking response and reduced noise. This setup is a practical choice for a 2012-2017 Kia Rio brake job when you want all major friction components in one kit.
Common Brake Service Issues
- Rust on existing rotors
- Brake noise during stops
- Uneven pad bedding after rotor replacement
- Reduced braking consistency from worn friction material
- Longer service time from cleaning oil-coated rotors
Installation Notes and Tips
Fits 2012-2017 Kia Rio, front and rear. The rotors are shipped dry and ready for installation, so no oil cleaning step is required before service. Follow standard brake service procedures, inspect related wear items during installation, and verify proper pad bedding after the repair. Part number 4504-21013 is intended for direct brake replacement on this vehicle application.
Quality Assurance
DFC GEOSPEC rotors are 100% inspected after machining, and vented rotors are electronically mill-balanced when needed. Each rotor is checked against critical OE specifications, and the rotors include a 12-month warranty against defects in material and workmanship. Part number 4504-21013 reflects the same matched-kit approach for the Kia Rio application.
Brake Kit for 2012-2017 Kia Rio
Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads, part number 4504-21013, is a complete disc brake kit for the front and rear of the 2012-2017 Kia Rio. It combines coated rotors and matched pads in one package for a straightforward brake service on this application.
Key Features
- Complete disc brake kit with rotors and pads for front and rear service
- Fits 2012-2017 Kia Rio, front and rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Rotors ship dry and are ready to install without oil removal
- Non-directional rotor finish supports even pad bed-in and quieter stops
- 5000 Advanced Brake Pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
Product Line Details
The DFC GEOSPEC rotor line focuses on coated replacement rotors built to OE-style dimensions and cast iron specifications. The coating helps resist rust better than conventional paint or zinc finishes, while the machining process uses tight tolerances and balance inspection on vented rotors for consistent operation. The 5000 Advanced Brake Pads line is formulated for axle-specific braking needs and is finished to reduce initial break-in time.
Detailed Description
Part number 4504-21013 is built for drivers servicing a Kia Rio brake system with a matched rotor-and-pad package. The rotors are machined to OE specifications, finished with a non-directional surface, and inspected for critical dimensions before shipment. The pads are post cured, scorched, and assembled with premium shims to support stable braking response and reduced noise. This setup is a practical choice for a 2012-2017 Kia Rio brake job when you want all major friction components in one kit.
Common Brake Service Issues
- Rust on existing rotors
- Brake noise during stops
- Uneven pad bedding after rotor replacement
- Reduced braking consistency from worn friction material
- Longer service time from cleaning oil-coated rotors
Installation Notes and Tips
Fits 2012-2017 Kia Rio, front and rear. The rotors are shipped dry and ready for installation, so no oil cleaning step is required before service. Follow standard brake service procedures, inspect related wear items during installation, and verify proper pad bedding after the repair. Part number 4504-21013 is intended for direct brake replacement on this vehicle application.
Quality Assurance
DFC GEOSPEC rotors are 100% inspected after machining, and vented rotors are electronically mill-balanced when needed. Each rotor is checked against critical OE specifications, and the rotors include a 12-month warranty against defects in material and workmanship. Part number 4504-21013 reflects the same matched-kit approach for the Kia Rio application.
Original: $259.38
-65%$259.38
$90.78Description
Brake Kit for 2012-2017 Kia Rio
Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads, part number 4504-21013, is a complete disc brake kit for the front and rear of the 2012-2017 Kia Rio. It combines coated rotors and matched pads in one package for a straightforward brake service on this application.
Key Features
- Complete disc brake kit with rotors and pads for front and rear service
- Fits 2012-2017 Kia Rio, front and rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Rotors ship dry and are ready to install without oil removal
- Non-directional rotor finish supports even pad bed-in and quieter stops
- 5000 Advanced Brake Pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
Product Line Details
The DFC GEOSPEC rotor line focuses on coated replacement rotors built to OE-style dimensions and cast iron specifications. The coating helps resist rust better than conventional paint or zinc finishes, while the machining process uses tight tolerances and balance inspection on vented rotors for consistent operation. The 5000 Advanced Brake Pads line is formulated for axle-specific braking needs and is finished to reduce initial break-in time.
Detailed Description
Part number 4504-21013 is built for drivers servicing a Kia Rio brake system with a matched rotor-and-pad package. The rotors are machined to OE specifications, finished with a non-directional surface, and inspected for critical dimensions before shipment. The pads are post cured, scorched, and assembled with premium shims to support stable braking response and reduced noise. This setup is a practical choice for a 2012-2017 Kia Rio brake job when you want all major friction components in one kit.
Common Brake Service Issues
- Rust on existing rotors
- Brake noise during stops
- Uneven pad bedding after rotor replacement
- Reduced braking consistency from worn friction material
- Longer service time from cleaning oil-coated rotors
Installation Notes and Tips
Fits 2012-2017 Kia Rio, front and rear. The rotors are shipped dry and ready for installation, so no oil cleaning step is required before service. Follow standard brake service procedures, inspect related wear items during installation, and verify proper pad bedding after the repair. Part number 4504-21013 is intended for direct brake replacement on this vehicle application.
Quality Assurance
DFC GEOSPEC rotors are 100% inspected after machining, and vented rotors are electronically mill-balanced when needed. Each rotor is checked against critical OE specifications, and the rotors include a 12-month warranty against defects in material and workmanship. Part number 4504-21013 reflects the same matched-kit approach for the Kia Rio application.
