Dynamite Friction 4504-03075 Disc Brake Kit - Front and Rear
Brake Kit for 2017-2020 Hyundai Elantra
This DFC brake kit combines GEOSPEC coated rotors with 5000 Advanced brake pads for front and rear service on the 2017-2020 Hyundai Elantra. Part number 4504-03075 is built for drivers replacing worn brake components with an OE-style disc brake kit that supports consistent stopping performance and cleaner rotor installation.
Key Features
- Complete front and rear brake kit for the 2017-2020 Hyundai Elantra
- DFC GEOSPEC rotors feature a silver-gray protective coating that resists rust better than conventional paint or zinc finishes
- Rotors are shipped dry and ready to install, with no oil coating to remove
- Non-directional rotor finish helps promote even pad bed-in and smoother braking
- 5000 Advanced pads are post-cured and scorched to reduce initial break-in time
- Premium rubber-steel-rubber shims are used to improve noise, vibration, and harshness control
- Part number: 4504-03075
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are engineered to OE specifications using G3000/G11H18 cast iron and tight machining tolerances. Each vented rotor is inspected for balance, then finished and checked against critical dimensions before release. The pad set is formulated for stable friction performance and assembled with NVH-focused shims for quieter operation. This brake kit is a practical choice for Hyundai Elantra brake replacement when you want matched rotors and pads in one package. Part number 4504-03075 is also a useful reference when ordering the correct front and rear brake kit for the 2017-2020 Hyundai Elantra.
What This Brake Kit Helps Address
- Brake pulsation from worn or uneven rotors
- Rust buildup on exposed rotor surfaces
- Noise during braking from aged pads or hardware wear
- Extended stopping distance caused by depleted friction material
- Uneven pad bedding after rotor replacement
Installation Notes
Fits 2017-2020 Hyundai Elantra, front and rear. Clean installation surfaces before assembly and follow the vehicle manufacturer’s brake service procedure. Because the rotors are processed dry, no additional cleaning is needed before installation. Verify pad and rotor orientation, then perform a proper bed-in procedure after installation to help establish even friction transfer.
Quality Assurance
Each rotor is inspected for balance and critical dimensions, and every finished rotor is checked to confirm OE-spec requirements. DFC backs the rotors with a 12-month warranty against defects in material and workmanship. The 5000 Advanced pads are post-cured and scorched to support stable friction performance from the first stops.
Brake Kit for 2017-2020 Hyundai Elantra
This DFC brake kit combines GEOSPEC coated rotors with 5000 Advanced brake pads for front and rear service on the 2017-2020 Hyundai Elantra. Part number 4504-03075 is built for drivers replacing worn brake components with an OE-style disc brake kit that supports consistent stopping performance and cleaner rotor installation.
Key Features
- Complete front and rear brake kit for the 2017-2020 Hyundai Elantra
- DFC GEOSPEC rotors feature a silver-gray protective coating that resists rust better than conventional paint or zinc finishes
- Rotors are shipped dry and ready to install, with no oil coating to remove
- Non-directional rotor finish helps promote even pad bed-in and smoother braking
- 5000 Advanced pads are post-cured and scorched to reduce initial break-in time
- Premium rubber-steel-rubber shims are used to improve noise, vibration, and harshness control
- Part number: 4504-03075
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are engineered to OE specifications using G3000/G11H18 cast iron and tight machining tolerances. Each vented rotor is inspected for balance, then finished and checked against critical dimensions before release. The pad set is formulated for stable friction performance and assembled with NVH-focused shims for quieter operation. This brake kit is a practical choice for Hyundai Elantra brake replacement when you want matched rotors and pads in one package. Part number 4504-03075 is also a useful reference when ordering the correct front and rear brake kit for the 2017-2020 Hyundai Elantra.
What This Brake Kit Helps Address
- Brake pulsation from worn or uneven rotors
- Rust buildup on exposed rotor surfaces
- Noise during braking from aged pads or hardware wear
- Extended stopping distance caused by depleted friction material
- Uneven pad bedding after rotor replacement
Installation Notes
Fits 2017-2020 Hyundai Elantra, front and rear. Clean installation surfaces before assembly and follow the vehicle manufacturer’s brake service procedure. Because the rotors are processed dry, no additional cleaning is needed before installation. Verify pad and rotor orientation, then perform a proper bed-in procedure after installation to help establish even friction transfer.
Quality Assurance
Each rotor is inspected for balance and critical dimensions, and every finished rotor is checked to confirm OE-spec requirements. DFC backs the rotors with a 12-month warranty against defects in material and workmanship. The 5000 Advanced pads are post-cured and scorched to support stable friction performance from the first stops.
Original: $265.17
-65%$265.17
$92.81Description
Brake Kit for 2017-2020 Hyundai Elantra
This DFC brake kit combines GEOSPEC coated rotors with 5000 Advanced brake pads for front and rear service on the 2017-2020 Hyundai Elantra. Part number 4504-03075 is built for drivers replacing worn brake components with an OE-style disc brake kit that supports consistent stopping performance and cleaner rotor installation.
Key Features
- Complete front and rear brake kit for the 2017-2020 Hyundai Elantra
- DFC GEOSPEC rotors feature a silver-gray protective coating that resists rust better than conventional paint or zinc finishes
- Rotors are shipped dry and ready to install, with no oil coating to remove
- Non-directional rotor finish helps promote even pad bed-in and smoother braking
- 5000 Advanced pads are post-cured and scorched to reduce initial break-in time
- Premium rubber-steel-rubber shims are used to improve noise, vibration, and harshness control
- Part number: 4504-03075
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are engineered to OE specifications using G3000/G11H18 cast iron and tight machining tolerances. Each vented rotor is inspected for balance, then finished and checked against critical dimensions before release. The pad set is formulated for stable friction performance and assembled with NVH-focused shims for quieter operation. This brake kit is a practical choice for Hyundai Elantra brake replacement when you want matched rotors and pads in one package. Part number 4504-03075 is also a useful reference when ordering the correct front and rear brake kit for the 2017-2020 Hyundai Elantra.
What This Brake Kit Helps Address
- Brake pulsation from worn or uneven rotors
- Rust buildup on exposed rotor surfaces
- Noise during braking from aged pads or hardware wear
- Extended stopping distance caused by depleted friction material
- Uneven pad bedding after rotor replacement
Installation Notes
Fits 2017-2020 Hyundai Elantra, front and rear. Clean installation surfaces before assembly and follow the vehicle manufacturer’s brake service procedure. Because the rotors are processed dry, no additional cleaning is needed before installation. Verify pad and rotor orientation, then perform a proper bed-in procedure after installation to help establish even friction transfer.
Quality Assurance
Each rotor is inspected for balance and critical dimensions, and every finished rotor is checked to confirm OE-spec requirements. DFC backs the rotors with a 12-month warranty against defects in material and workmanship. The 5000 Advanced pads are post-cured and scorched to support stable friction performance from the first stops.
