Dynamite Friction 4504-03059 Disc Brake Kit - Front and Rear
Brake Kit for Hyundai and Kia
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit combines coated brake rotors and matched friction material for a complete service solution. Part number 4504-03059 is built for front and rear brake service on select Hyundai Santa Fe and Kia Sorento applications.
Key Features
- DFC GEOSPEC coated rotors with a silver-gray protective finish that resists rust better than conventional paint or zinc coatings
- Dry-processed rotors arrive ready to install, with no oil coating to clean off before service
- G3000/G11H18 cast iron rotor specification for OE-style durability, reliability, and stability
- Non-directional rotor finish supports even pad bed-in and smoother, quieter braking
- 5000 Advanced Brake Pads are post-cured and scorched to reduce initial break-in time
- Premium rubber-steel-rubber shims help improve noise, vibration, and harshness control
Detailed Description
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are engineered as a complete disc brake kit for drivers servicing 2011-2013 Kia Sorento and 2010-2012 Hyundai Santa Fe models in front and rear positions. The rotors are machined to tight tolerances, finished with a non-directional surface, and inspected for critical dimensions and balance to support consistent braking performance. The pad set is formulated for stable friction characteristics and assembled with premium shims for refined pedal feel and reduced brake noise. Part number 4504-03059 is a practical choice when replacing worn brake components on a Kia Sorento or Hyundai Santa Fe with a matched rotor-and-pad package.
DFC’s GEOSPEC product line focuses on coated rotor protection and OE-style fitment, while the 5000 Advanced Brake Pads line emphasizes controlled friction behavior and reduced break-in time. This combination makes the kit well suited for routine brake service where rotor condition, pad wear, and braking noise are all being addressed at once.
What This Brake Kit Helps Address
- Brake pulsation caused by worn or uneven rotors
- Reduced stopping performance from thin or heat-affected brake components
- Brake noise from aged pads or inconsistent rotor surfaces
- Rust buildup on exposed rotor hats and edges
- Extended service time from separate rotor and pad sourcing
Installation Notes and Tips
Compatible With 2011-2013 Kia Sorento, front and rear, and 2010-2012 Hyundai Santa Fe, front and rear. Verify rotor size, brake package, and axle position before installation. Clean handling surfaces during assembly and follow standard brake service procedures for pad bedding and torque specification. Part number 4504-03059 is shipped dry and ready for installation without additional rotor preparation.
Quality Assurance
Each rotor is inspected for critical attributes to confirm OE-spec alignment, and vented rotors are balance-checked during production. The rotors carry a 12-month warranty against defects in material and workmanship.
Brake Kit for Hyundai and Kia
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit combines coated brake rotors and matched friction material for a complete service solution. Part number 4504-03059 is built for front and rear brake service on select Hyundai Santa Fe and Kia Sorento applications.
Key Features
- DFC GEOSPEC coated rotors with a silver-gray protective finish that resists rust better than conventional paint or zinc coatings
- Dry-processed rotors arrive ready to install, with no oil coating to clean off before service
- G3000/G11H18 cast iron rotor specification for OE-style durability, reliability, and stability
- Non-directional rotor finish supports even pad bed-in and smoother, quieter braking
- 5000 Advanced Brake Pads are post-cured and scorched to reduce initial break-in time
- Premium rubber-steel-rubber shims help improve noise, vibration, and harshness control
Detailed Description
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are engineered as a complete disc brake kit for drivers servicing 2011-2013 Kia Sorento and 2010-2012 Hyundai Santa Fe models in front and rear positions. The rotors are machined to tight tolerances, finished with a non-directional surface, and inspected for critical dimensions and balance to support consistent braking performance. The pad set is formulated for stable friction characteristics and assembled with premium shims for refined pedal feel and reduced brake noise. Part number 4504-03059 is a practical choice when replacing worn brake components on a Kia Sorento or Hyundai Santa Fe with a matched rotor-and-pad package.
DFC’s GEOSPEC product line focuses on coated rotor protection and OE-style fitment, while the 5000 Advanced Brake Pads line emphasizes controlled friction behavior and reduced break-in time. This combination makes the kit well suited for routine brake service where rotor condition, pad wear, and braking noise are all being addressed at once.
What This Brake Kit Helps Address
- Brake pulsation caused by worn or uneven rotors
- Reduced stopping performance from thin or heat-affected brake components
- Brake noise from aged pads or inconsistent rotor surfaces
- Rust buildup on exposed rotor hats and edges
- Extended service time from separate rotor and pad sourcing
Installation Notes and Tips
Compatible With 2011-2013 Kia Sorento, front and rear, and 2010-2012 Hyundai Santa Fe, front and rear. Verify rotor size, brake package, and axle position before installation. Clean handling surfaces during assembly and follow standard brake service procedures for pad bedding and torque specification. Part number 4504-03059 is shipped dry and ready for installation without additional rotor preparation.
Quality Assurance
Each rotor is inspected for critical attributes to confirm OE-spec alignment, and vented rotors are balance-checked during production. The rotors carry a 12-month warranty against defects in material and workmanship.
Original: $370.06
-65%$370.06
$129.52Description
Brake Kit for Hyundai and Kia
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit combines coated brake rotors and matched friction material for a complete service solution. Part number 4504-03059 is built for front and rear brake service on select Hyundai Santa Fe and Kia Sorento applications.
Key Features
- DFC GEOSPEC coated rotors with a silver-gray protective finish that resists rust better than conventional paint or zinc coatings
- Dry-processed rotors arrive ready to install, with no oil coating to clean off before service
- G3000/G11H18 cast iron rotor specification for OE-style durability, reliability, and stability
- Non-directional rotor finish supports even pad bed-in and smoother, quieter braking
- 5000 Advanced Brake Pads are post-cured and scorched to reduce initial break-in time
- Premium rubber-steel-rubber shims help improve noise, vibration, and harshness control
Detailed Description
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are engineered as a complete disc brake kit for drivers servicing 2011-2013 Kia Sorento and 2010-2012 Hyundai Santa Fe models in front and rear positions. The rotors are machined to tight tolerances, finished with a non-directional surface, and inspected for critical dimensions and balance to support consistent braking performance. The pad set is formulated for stable friction characteristics and assembled with premium shims for refined pedal feel and reduced brake noise. Part number 4504-03059 is a practical choice when replacing worn brake components on a Kia Sorento or Hyundai Santa Fe with a matched rotor-and-pad package.
DFC’s GEOSPEC product line focuses on coated rotor protection and OE-style fitment, while the 5000 Advanced Brake Pads line emphasizes controlled friction behavior and reduced break-in time. This combination makes the kit well suited for routine brake service where rotor condition, pad wear, and braking noise are all being addressed at once.
What This Brake Kit Helps Address
- Brake pulsation caused by worn or uneven rotors
- Reduced stopping performance from thin or heat-affected brake components
- Brake noise from aged pads or inconsistent rotor surfaces
- Rust buildup on exposed rotor hats and edges
- Extended service time from separate rotor and pad sourcing
Installation Notes and Tips
Compatible With 2011-2013 Kia Sorento, front and rear, and 2010-2012 Hyundai Santa Fe, front and rear. Verify rotor size, brake package, and axle position before installation. Clean handling surfaces during assembly and follow standard brake service procedures for pad bedding and torque specification. Part number 4504-03059 is shipped dry and ready for installation without additional rotor preparation.
Quality Assurance
Each rotor is inspected for critical attributes to confirm OE-spec alignment, and vented rotors are balance-checked during production. The rotors carry a 12-month warranty against defects in material and workmanship.
