Dynamite Friction 4504-03036 Disc Brake Kit - Front and Rear
Brake Kit for 2009 Hyundai Elantra
This DFC brake kit combines GEOSPEC coated rotors with 5000 Advanced brake pads for the front and rear of the 2009 Hyundai Elantra. It is built for drivers who want a complete disc brake kit with OE-style fitment, corrosion-resistant rotor surfaces, and pads formulated for stable braking performance.
Key Features
- Complete disc brake kit with rotors and pads for front and rear service
- Fits 2009 Hyundai Elantra, front and rear
- DFC GEOSPEC coated rotors with a silver-gray protective finish
- Dry-processed rotors arrive ready to install
- Non-directional rotor finish supports even pad bed-in and smoother stops
- 5000 Advanced pads are post-cured and scorched for consistent friction
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Part number 4504-03036
Product Details
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads line is built as a service kit for drivers replacing worn brake components on the 2009 Hyundai Elantra. The rotors use G3000/G11H18 cast iron construction and are machined to tight tolerances, then finished with a non-directional surface to support consistent pad contact. The coated rotor surface helps resist rust better than conventional paint or zinc finishes, while the dry packaging eliminates the need to clean oil from the rotor before installation. The 5000 Advanced pads are formulated for stable friction and use premium shims to improve NVH control. Part number 4504-03036 is a direct service option for front and rear brake replacement on this vehicle.
Common Brake Issues This Kit Can Address
- Brake pulsation from worn or uneven rotors
- Reduced stopping performance from thin or glazed pads
- Brake noise caused by pad wear or poor shim performance
- Rust buildup on exposed rotor surfaces
- Uneven pad bedding after brake service
Installation Notes
Compatible With 2009 Hyundai Elantra, front and rear. The rotors are shipped dry and ready to install, which helps reduce prep time during brake service. For proper results, clean the hub mounting surface, inspect calipers and hardware condition, and follow the vehicle manufacturer’s brake bedding procedure after installation. Verify rotor orientation and pad placement before final assembly. Part number 4504-03036 should be matched to the vehicle’s brake configuration before service begins.
Quality Assurance
Each DFC GEOSPEC rotor is inspected for critical dimensions, balance, and OE-spec compliance after machining. The rotors are covered by a 12-month warranty against defects in material and workmanship. The 5000 Advanced pads are post-cured and scorched to support stable friction performance from the first stop.
Brake Kit for 2009 Hyundai Elantra
This DFC brake kit combines GEOSPEC coated rotors with 5000 Advanced brake pads for the front and rear of the 2009 Hyundai Elantra. It is built for drivers who want a complete disc brake kit with OE-style fitment, corrosion-resistant rotor surfaces, and pads formulated for stable braking performance.
Key Features
- Complete disc brake kit with rotors and pads for front and rear service
- Fits 2009 Hyundai Elantra, front and rear
- DFC GEOSPEC coated rotors with a silver-gray protective finish
- Dry-processed rotors arrive ready to install
- Non-directional rotor finish supports even pad bed-in and smoother stops
- 5000 Advanced pads are post-cured and scorched for consistent friction
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Part number 4504-03036
Product Details
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads line is built as a service kit for drivers replacing worn brake components on the 2009 Hyundai Elantra. The rotors use G3000/G11H18 cast iron construction and are machined to tight tolerances, then finished with a non-directional surface to support consistent pad contact. The coated rotor surface helps resist rust better than conventional paint or zinc finishes, while the dry packaging eliminates the need to clean oil from the rotor before installation. The 5000 Advanced pads are formulated for stable friction and use premium shims to improve NVH control. Part number 4504-03036 is a direct service option for front and rear brake replacement on this vehicle.
Common Brake Issues This Kit Can Address
- Brake pulsation from worn or uneven rotors
- Reduced stopping performance from thin or glazed pads
- Brake noise caused by pad wear or poor shim performance
- Rust buildup on exposed rotor surfaces
- Uneven pad bedding after brake service
Installation Notes
Compatible With 2009 Hyundai Elantra, front and rear. The rotors are shipped dry and ready to install, which helps reduce prep time during brake service. For proper results, clean the hub mounting surface, inspect calipers and hardware condition, and follow the vehicle manufacturer’s brake bedding procedure after installation. Verify rotor orientation and pad placement before final assembly. Part number 4504-03036 should be matched to the vehicle’s brake configuration before service begins.
Quality Assurance
Each DFC GEOSPEC rotor is inspected for critical dimensions, balance, and OE-spec compliance after machining. The rotors are covered by a 12-month warranty against defects in material and workmanship. The 5000 Advanced pads are post-cured and scorched to support stable friction performance from the first stop.
Original: $282.50
-65%$282.50
$98.88Description
Brake Kit for 2009 Hyundai Elantra
This DFC brake kit combines GEOSPEC coated rotors with 5000 Advanced brake pads for the front and rear of the 2009 Hyundai Elantra. It is built for drivers who want a complete disc brake kit with OE-style fitment, corrosion-resistant rotor surfaces, and pads formulated for stable braking performance.
Key Features
- Complete disc brake kit with rotors and pads for front and rear service
- Fits 2009 Hyundai Elantra, front and rear
- DFC GEOSPEC coated rotors with a silver-gray protective finish
- Dry-processed rotors arrive ready to install
- Non-directional rotor finish supports even pad bed-in and smoother stops
- 5000 Advanced pads are post-cured and scorched for consistent friction
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Part number 4504-03036
Product Details
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads line is built as a service kit for drivers replacing worn brake components on the 2009 Hyundai Elantra. The rotors use G3000/G11H18 cast iron construction and are machined to tight tolerances, then finished with a non-directional surface to support consistent pad contact. The coated rotor surface helps resist rust better than conventional paint or zinc finishes, while the dry packaging eliminates the need to clean oil from the rotor before installation. The 5000 Advanced pads are formulated for stable friction and use premium shims to improve NVH control. Part number 4504-03036 is a direct service option for front and rear brake replacement on this vehicle.
Common Brake Issues This Kit Can Address
- Brake pulsation from worn or uneven rotors
- Reduced stopping performance from thin or glazed pads
- Brake noise caused by pad wear or poor shim performance
- Rust buildup on exposed rotor surfaces
- Uneven pad bedding after brake service
Installation Notes
Compatible With 2009 Hyundai Elantra, front and rear. The rotors are shipped dry and ready to install, which helps reduce prep time during brake service. For proper results, clean the hub mounting surface, inspect calipers and hardware condition, and follow the vehicle manufacturer’s brake bedding procedure after installation. Verify rotor orientation and pad placement before final assembly. Part number 4504-03036 should be matched to the vehicle’s brake configuration before service begins.
Quality Assurance
Each DFC GEOSPEC rotor is inspected for critical dimensions, balance, and OE-spec compliance after machining. The rotors are covered by a 12-month warranty against defects in material and workmanship. The 5000 Advanced pads are post-cured and scorched to support stable friction performance from the first stop.
