Dynamite Friction 4502-99109 Disc Brake Kit - Front
Brake Kit for OE-Style Service Replacement
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit combines coated brake rotors and matched friction material in one service package. Part number 4502-99109 is built for drivers and technicians looking for a direct brake service solution with corrosion-resistant rotor surfaces and stable pad performance.
Compatible With confirmed vehicle applications only, this brake kit is intended for routine brake service on the listed make/model fitment. It is a practical choice for brake jobs where rotor replacement and pad replacement are performed together.
Key Features
- DFC GEOSPEC coated brake rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install without oil removal
- G3000/G11H18 cast iron rotor specification for OE-style durability and stability
- Non-directional rotor finish for more even pad bed-in and smoother braking
- 100% inspected rotors, including balance correction on vented rotors when required
- DFC 5000 Advanced Brake Pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved NVH control
Product Line Details
The DFC GEOSPEC rotor line focuses on corrosion protection and installation efficiency. The coated surface is designed to resist rust better than conventional paint or zinc finishes, while the dry packaging helps reduce prep time during brake service. The 5000 Advanced Brake Pads line is formulated for stable friction performance and quieter operation through post-curing, scorching, and premium shim construction.
Detailed Description
Part number 4502-99109 is a disc brake kit from Dynamite Friction that pairs GEOSPEC coated rotors with DFC 5000 Advanced Brake Pads. The rotors are machined to tight tolerances, finished with a non-directional surface, and inspected to meet OE specifications. The pads are built for consistent friction output and improved noise, vibration, and harshness control. This makes the kit suitable for brake service where rotor condition, pad wear, and corrosion protection are all being addressed at the same time. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Problems This Kit Can Address
- Brake pulsation caused by worn or uneven rotors
- Reduced stopping performance from worn brake pads
- Brake noise related to pad wear or surface condition
- Rotor surface rust from age, moisture, or road exposure
- Extended service time caused by oil-coated replacement rotors
Installation Notes and Tips
Fits the confirmed application list only; verify year, make, model, and position before ordering. For best results, replace rotors and pads together during the same axle service. Clean all mating surfaces, inspect caliper hardware and guide pins, and follow the vehicle manufacturer’s brake bedding procedure after installation. Part number 4502-99109 is supplied dry, so no rotor degreasing step is needed before installation.
Quality Assurance
Each rotor is manufactured to OE specifications, then inspected for critical dimensions and balance where applicable. DFC states that every rotor includes a 12-month warranty against defects in material and workmanship.
Brake Kit for OE-Style Service Replacement
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit combines coated brake rotors and matched friction material in one service package. Part number 4502-99109 is built for drivers and technicians looking for a direct brake service solution with corrosion-resistant rotor surfaces and stable pad performance.
Compatible With confirmed vehicle applications only, this brake kit is intended for routine brake service on the listed make/model fitment. It is a practical choice for brake jobs where rotor replacement and pad replacement are performed together.
Key Features
- DFC GEOSPEC coated brake rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install without oil removal
- G3000/G11H18 cast iron rotor specification for OE-style durability and stability
- Non-directional rotor finish for more even pad bed-in and smoother braking
- 100% inspected rotors, including balance correction on vented rotors when required
- DFC 5000 Advanced Brake Pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved NVH control
Product Line Details
The DFC GEOSPEC rotor line focuses on corrosion protection and installation efficiency. The coated surface is designed to resist rust better than conventional paint or zinc finishes, while the dry packaging helps reduce prep time during brake service. The 5000 Advanced Brake Pads line is formulated for stable friction performance and quieter operation through post-curing, scorching, and premium shim construction.
Detailed Description
Part number 4502-99109 is a disc brake kit from Dynamite Friction that pairs GEOSPEC coated rotors with DFC 5000 Advanced Brake Pads. The rotors are machined to tight tolerances, finished with a non-directional surface, and inspected to meet OE specifications. The pads are built for consistent friction output and improved noise, vibration, and harshness control. This makes the kit suitable for brake service where rotor condition, pad wear, and corrosion protection are all being addressed at the same time. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Problems This Kit Can Address
- Brake pulsation caused by worn or uneven rotors
- Reduced stopping performance from worn brake pads
- Brake noise related to pad wear or surface condition
- Rotor surface rust from age, moisture, or road exposure
- Extended service time caused by oil-coated replacement rotors
Installation Notes and Tips
Fits the confirmed application list only; verify year, make, model, and position before ordering. For best results, replace rotors and pads together during the same axle service. Clean all mating surfaces, inspect caliper hardware and guide pins, and follow the vehicle manufacturer’s brake bedding procedure after installation. Part number 4502-99109 is supplied dry, so no rotor degreasing step is needed before installation.
Quality Assurance
Each rotor is manufactured to OE specifications, then inspected for critical dimensions and balance where applicable. DFC states that every rotor includes a 12-month warranty against defects in material and workmanship.
Original: $450.55
-65%$450.55
$157.69Description
Brake Kit for OE-Style Service Replacement
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit combines coated brake rotors and matched friction material in one service package. Part number 4502-99109 is built for drivers and technicians looking for a direct brake service solution with corrosion-resistant rotor surfaces and stable pad performance.
Compatible With confirmed vehicle applications only, this brake kit is intended for routine brake service on the listed make/model fitment. It is a practical choice for brake jobs where rotor replacement and pad replacement are performed together.
Key Features
- DFC GEOSPEC coated brake rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install without oil removal
- G3000/G11H18 cast iron rotor specification for OE-style durability and stability
- Non-directional rotor finish for more even pad bed-in and smoother braking
- 100% inspected rotors, including balance correction on vented rotors when required
- DFC 5000 Advanced Brake Pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved NVH control
Product Line Details
The DFC GEOSPEC rotor line focuses on corrosion protection and installation efficiency. The coated surface is designed to resist rust better than conventional paint or zinc finishes, while the dry packaging helps reduce prep time during brake service. The 5000 Advanced Brake Pads line is formulated for stable friction performance and quieter operation through post-curing, scorching, and premium shim construction.
Detailed Description
Part number 4502-99109 is a disc brake kit from Dynamite Friction that pairs GEOSPEC coated rotors with DFC 5000 Advanced Brake Pads. The rotors are machined to tight tolerances, finished with a non-directional surface, and inspected to meet OE specifications. The pads are built for consistent friction output and improved noise, vibration, and harshness control. This makes the kit suitable for brake service where rotor condition, pad wear, and corrosion protection are all being addressed at the same time. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Problems This Kit Can Address
- Brake pulsation caused by worn or uneven rotors
- Reduced stopping performance from worn brake pads
- Brake noise related to pad wear or surface condition
- Rotor surface rust from age, moisture, or road exposure
- Extended service time caused by oil-coated replacement rotors
Installation Notes and Tips
Fits the confirmed application list only; verify year, make, model, and position before ordering. For best results, replace rotors and pads together during the same axle service. Clean all mating surfaces, inspect caliper hardware and guide pins, and follow the vehicle manufacturer’s brake bedding procedure after installation. Part number 4502-99109 is supplied dry, so no rotor degreasing step is needed before installation.
Quality Assurance
Each rotor is manufactured to OE specifications, then inspected for critical dimensions and balance where applicable. DFC states that every rotor includes a 12-month warranty against defects in material and workmanship.
