Dynamite Friction 4502-99073 Disc Brake Kit - Front
Front Brake Kit for 2011-2012 Ford Taurus
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads, part number 4502-99073, is a front disc brake kit for the 2011-2012 Ford Taurus with Performance Package. It combines coated rotors and matched pads in one service kit for a direct front brake replacement.
Key Features
- Fits 2011-2012 Ford Taurus, front, with Performance Package
- Includes DFC GEOSPEC coated brake rotors and DFC 5000 Advanced brake pads
- Rotors are dry processed and ready to install
- Silver-gray corrosion-resistant coating helps resist rust
- Non-directional rotor finish supports even pad bed-in and quieter stops
- Brake pads are post-cured, scorched, and fitted with rubber-steel-rubber shims for NVH control
- Part number 4502-99073 for front brake service
Product Details
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads line is built as a complete brake service kit for drivers who want matched friction and rotor components from one source. For the Ford Taurus front axle, this kit pairs OE-style cast iron rotors with coated surfaces and advanced pads formulated for stable friction performance. The rotor coating is designed to fight corrosion better than conventional paint or zinc finishes, while the pad construction is aimed at consistent stopping response and reduced noise, vibration, and harshness. If you are searching for a front brake kit for 2011-2012 Ford Taurus Performance Package models, 4502-99073 is the correct application to review.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Reasons to Replace
- Brake pulsation or rotor thickness variation
- Rust buildup on the rotor surface or hat area
- Noise from worn pads or uneven pad transfer
- Reduced braking response during normal driving
- Front brake service needed on a 2011-2012 Ford Taurus with Performance Package
Installation Notes
Verify front axle fitment before ordering, since this kit is specific to 2011-2012 Ford Taurus models with the Performance Package. Clean the rotor friction surface only as needed during handling, and follow standard brake service procedures for pad bedding and torque specifications. Because the rotors are shipped dry and ready to install, no additional rotor preparation is required before assembly.
Quality Assurance
DFC machines the rotors to tight tolerances, applies a non-directional finish, and inspects critical dimensions to help ensure OE-level fit and function. Vented rotors are balance-checked and corrected when needed. Each rotor includes a 12-month warranty against defects in material and workmanship. Part number 4502-99073 is built for front brake service on the Ford Taurus application listed above.
Front Brake Kit for 2011-2012 Ford Taurus
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads, part number 4502-99073, is a front disc brake kit for the 2011-2012 Ford Taurus with Performance Package. It combines coated rotors and matched pads in one service kit for a direct front brake replacement.
Key Features
- Fits 2011-2012 Ford Taurus, front, with Performance Package
- Includes DFC GEOSPEC coated brake rotors and DFC 5000 Advanced brake pads
- Rotors are dry processed and ready to install
- Silver-gray corrosion-resistant coating helps resist rust
- Non-directional rotor finish supports even pad bed-in and quieter stops
- Brake pads are post-cured, scorched, and fitted with rubber-steel-rubber shims for NVH control
- Part number 4502-99073 for front brake service
Product Details
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads line is built as a complete brake service kit for drivers who want matched friction and rotor components from one source. For the Ford Taurus front axle, this kit pairs OE-style cast iron rotors with coated surfaces and advanced pads formulated for stable friction performance. The rotor coating is designed to fight corrosion better than conventional paint or zinc finishes, while the pad construction is aimed at consistent stopping response and reduced noise, vibration, and harshness. If you are searching for a front brake kit for 2011-2012 Ford Taurus Performance Package models, 4502-99073 is the correct application to review.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Reasons to Replace
- Brake pulsation or rotor thickness variation
- Rust buildup on the rotor surface or hat area
- Noise from worn pads or uneven pad transfer
- Reduced braking response during normal driving
- Front brake service needed on a 2011-2012 Ford Taurus with Performance Package
Installation Notes
Verify front axle fitment before ordering, since this kit is specific to 2011-2012 Ford Taurus models with the Performance Package. Clean the rotor friction surface only as needed during handling, and follow standard brake service procedures for pad bedding and torque specifications. Because the rotors are shipped dry and ready to install, no additional rotor preparation is required before assembly.
Quality Assurance
DFC machines the rotors to tight tolerances, applies a non-directional finish, and inspects critical dimensions to help ensure OE-level fit and function. Vented rotors are balance-checked and corrected when needed. Each rotor includes a 12-month warranty against defects in material and workmanship. Part number 4502-99073 is built for front brake service on the Ford Taurus application listed above.
Original: $270.70
-65%$270.70
$94.74Description
Front Brake Kit for 2011-2012 Ford Taurus
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads, part number 4502-99073, is a front disc brake kit for the 2011-2012 Ford Taurus with Performance Package. It combines coated rotors and matched pads in one service kit for a direct front brake replacement.
Key Features
- Fits 2011-2012 Ford Taurus, front, with Performance Package
- Includes DFC GEOSPEC coated brake rotors and DFC 5000 Advanced brake pads
- Rotors are dry processed and ready to install
- Silver-gray corrosion-resistant coating helps resist rust
- Non-directional rotor finish supports even pad bed-in and quieter stops
- Brake pads are post-cured, scorched, and fitted with rubber-steel-rubber shims for NVH control
- Part number 4502-99073 for front brake service
Product Details
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads line is built as a complete brake service kit for drivers who want matched friction and rotor components from one source. For the Ford Taurus front axle, this kit pairs OE-style cast iron rotors with coated surfaces and advanced pads formulated for stable friction performance. The rotor coating is designed to fight corrosion better than conventional paint or zinc finishes, while the pad construction is aimed at consistent stopping response and reduced noise, vibration, and harshness. If you are searching for a front brake kit for 2011-2012 Ford Taurus Performance Package models, 4502-99073 is the correct application to review.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Reasons to Replace
- Brake pulsation or rotor thickness variation
- Rust buildup on the rotor surface or hat area
- Noise from worn pads or uneven pad transfer
- Reduced braking response during normal driving
- Front brake service needed on a 2011-2012 Ford Taurus with Performance Package
Installation Notes
Verify front axle fitment before ordering, since this kit is specific to 2011-2012 Ford Taurus models with the Performance Package. Clean the rotor friction surface only as needed during handling, and follow standard brake service procedures for pad bedding and torque specifications. Because the rotors are shipped dry and ready to install, no additional rotor preparation is required before assembly.
Quality Assurance
DFC machines the rotors to tight tolerances, applies a non-directional finish, and inspects critical dimensions to help ensure OE-level fit and function. Vented rotors are balance-checked and corrected when needed. Each rotor includes a 12-month warranty against defects in material and workmanship. Part number 4502-99073 is built for front brake service on the Ford Taurus application listed above.
