Dynamite Friction 4502-80066 Disc Brake Kit - Front
Front Brake Kit for Mazda 3
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit is a front disc brake service kit for select Mazda 3 applications. It combines coated rotors and advanced friction pads in one package for a straightforward brake refresh on 2004-2013 Mazda 3 and 2010-2013 Mazda 3 Sport front axle applications.
Part number 4502-80066 is built for drivers looking for an OE-style brake service kit with rotor and pad pairing matched for front-end braking performance. The DFC GEOSPEC rotor finish helps resist rust, while the 5000 Advanced pads are prepared for stable friction and quieter operation.
Key Features
- Complete front disc brake kit with rotors and pads
- Compatible with 2004-2013 Mazda 3, front
- Compatible with 2010-2013 Mazda 3 Sport, front
- DFC GEOSPEC coated rotors with silver-gray corrosion-resistant finish
- Rotors ship dry and are ready to install
- Non-directional rotor finish supports even pad bed-in and smoother stops
- 5000 Advanced pads are post-cured and scorched for consistent friction
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Part number 4502-80066
Product Details
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads line is engineered as a matched brake service solution for front axle replacement. The rotors use G3000/G11H18 cast iron and are machined to tight tolerances, then finished with a non-directional surface to support quieter braking and more even pad contact. The coated surface is designed to fight rust better than conventional paint or zinc-style finishes, and the dry-pack rotor format eliminates the need to clean off oil before installation.
The 5000 Advanced pads are formulated for stable braking performance and are assembled with premium shims to improve NVH characteristics. This makes the kit a practical choice for Mazda 3 brake repair, Mazda 3 front rotor and pad replacement, and Mazda 3 Sport front brake service when the goal is to restore braking feel with a matched rotor-and-pad package. Part number 4502-80066 is also a useful reference when ordering the correct front brake kit for these applications.
Common Problems This Kit Can Address
- Front brake pulsation from worn or uneven rotors
- Squealing or noisy braking from aged pads
- Reduced stopping performance from worn friction material
- Rust buildup on exposed rotor surfaces
- Brake vibration or harshness during everyday driving
Installation Notes
Compatible With front axle service only for the listed Mazda applications. Inspect calipers, slides, and brake fluid condition before installation, and follow the vehicle manufacturer’s bedding procedure after the new pads and rotors are installed. The rotors are shipped dry and ready to install, which can reduce prep time during a standard brake job.
Fits 2004-2013 Mazda 3, front. Fits 2010-2013 Mazda 3 Sport, front. Part number 4502-80066.
Quality Assurance
DFC states that each rotor is inspected for critical dimensions and balance, with vented rotors electronically mill-balanced when required. The rotors are covered by a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and scorched during production to support consistent friction characteristics from the first stop.
Front Brake Kit for Mazda 3
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit is a front disc brake service kit for select Mazda 3 applications. It combines coated rotors and advanced friction pads in one package for a straightforward brake refresh on 2004-2013 Mazda 3 and 2010-2013 Mazda 3 Sport front axle applications.
Part number 4502-80066 is built for drivers looking for an OE-style brake service kit with rotor and pad pairing matched for front-end braking performance. The DFC GEOSPEC rotor finish helps resist rust, while the 5000 Advanced pads are prepared for stable friction and quieter operation.
Key Features
- Complete front disc brake kit with rotors and pads
- Compatible with 2004-2013 Mazda 3, front
- Compatible with 2010-2013 Mazda 3 Sport, front
- DFC GEOSPEC coated rotors with silver-gray corrosion-resistant finish
- Rotors ship dry and are ready to install
- Non-directional rotor finish supports even pad bed-in and smoother stops
- 5000 Advanced pads are post-cured and scorched for consistent friction
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Part number 4502-80066
Product Details
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads line is engineered as a matched brake service solution for front axle replacement. The rotors use G3000/G11H18 cast iron and are machined to tight tolerances, then finished with a non-directional surface to support quieter braking and more even pad contact. The coated surface is designed to fight rust better than conventional paint or zinc-style finishes, and the dry-pack rotor format eliminates the need to clean off oil before installation.
The 5000 Advanced pads are formulated for stable braking performance and are assembled with premium shims to improve NVH characteristics. This makes the kit a practical choice for Mazda 3 brake repair, Mazda 3 front rotor and pad replacement, and Mazda 3 Sport front brake service when the goal is to restore braking feel with a matched rotor-and-pad package. Part number 4502-80066 is also a useful reference when ordering the correct front brake kit for these applications.
Common Problems This Kit Can Address
- Front brake pulsation from worn or uneven rotors
- Squealing or noisy braking from aged pads
- Reduced stopping performance from worn friction material
- Rust buildup on exposed rotor surfaces
- Brake vibration or harshness during everyday driving
Installation Notes
Compatible With front axle service only for the listed Mazda applications. Inspect calipers, slides, and brake fluid condition before installation, and follow the vehicle manufacturer’s bedding procedure after the new pads and rotors are installed. The rotors are shipped dry and ready to install, which can reduce prep time during a standard brake job.
Fits 2004-2013 Mazda 3, front. Fits 2010-2013 Mazda 3 Sport, front. Part number 4502-80066.
Quality Assurance
DFC states that each rotor is inspected for critical dimensions and balance, with vented rotors electronically mill-balanced when required. The rotors are covered by a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and scorched during production to support consistent friction characteristics from the first stop.
Description
Front Brake Kit for Mazda 3
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit is a front disc brake service kit for select Mazda 3 applications. It combines coated rotors and advanced friction pads in one package for a straightforward brake refresh on 2004-2013 Mazda 3 and 2010-2013 Mazda 3 Sport front axle applications.
Part number 4502-80066 is built for drivers looking for an OE-style brake service kit with rotor and pad pairing matched for front-end braking performance. The DFC GEOSPEC rotor finish helps resist rust, while the 5000 Advanced pads are prepared for stable friction and quieter operation.
Key Features
- Complete front disc brake kit with rotors and pads
- Compatible with 2004-2013 Mazda 3, front
- Compatible with 2010-2013 Mazda 3 Sport, front
- DFC GEOSPEC coated rotors with silver-gray corrosion-resistant finish
- Rotors ship dry and are ready to install
- Non-directional rotor finish supports even pad bed-in and smoother stops
- 5000 Advanced pads are post-cured and scorched for consistent friction
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Part number 4502-80066
Product Details
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads line is engineered as a matched brake service solution for front axle replacement. The rotors use G3000/G11H18 cast iron and are machined to tight tolerances, then finished with a non-directional surface to support quieter braking and more even pad contact. The coated surface is designed to fight rust better than conventional paint or zinc-style finishes, and the dry-pack rotor format eliminates the need to clean off oil before installation.
The 5000 Advanced pads are formulated for stable braking performance and are assembled with premium shims to improve NVH characteristics. This makes the kit a practical choice for Mazda 3 brake repair, Mazda 3 front rotor and pad replacement, and Mazda 3 Sport front brake service when the goal is to restore braking feel with a matched rotor-and-pad package. Part number 4502-80066 is also a useful reference when ordering the correct front brake kit for these applications.
Common Problems This Kit Can Address
- Front brake pulsation from worn or uneven rotors
- Squealing or noisy braking from aged pads
- Reduced stopping performance from worn friction material
- Rust buildup on exposed rotor surfaces
- Brake vibration or harshness during everyday driving
Installation Notes
Compatible With front axle service only for the listed Mazda applications. Inspect calipers, slides, and brake fluid condition before installation, and follow the vehicle manufacturer’s bedding procedure after the new pads and rotors are installed. The rotors are shipped dry and ready to install, which can reduce prep time during a standard brake job.
Fits 2004-2013 Mazda 3, front. Fits 2010-2013 Mazda 3 Sport, front. Part number 4502-80066.
Quality Assurance
DFC states that each rotor is inspected for critical dimensions and balance, with vented rotors electronically mill-balanced when required. The rotors are covered by a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and scorched during production to support consistent friction characteristics from the first stop.
