Dynamite Friction 4502-76148 Disc Brake Kit - Rear
Rear Brake Kit for Toyota Yaris
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit is built for rear brake service on the 2012-2018 Toyota Yaris. It combines coated rotors and matched friction material in one disc brake kit for a direct rear axle replacement.
Key Features
- Fits 2012-2018 Toyota Yaris, rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Rotors ship dry and are ready to install without extra cleaning
- Non-directional rotor finish supports even pad bed-in and smoother braking
- 5000 Advanced Brake Pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Part number 4502-76148
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads, part number 4502-76148, are engineered as a rear brake service kit for the Toyota Yaris. The rotors use G3000/G11H18 cast iron and are machined to OE-style tolerances, then finished with a non-directional surface for consistent pad contact. The coated rotor surface is designed to resist rust better than conventional paint or zinc finishes, while the dry packaging reduces prep time during installation. The 5000 Advanced pads are formulated for stable friction output and are assembled with shims to improve brake feel and reduce noise.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Issues This Kit Addresses
- Rear brake pulsation from worn or uneven rotors
- Brake noise caused by aged pads or poor pad-to-rotor contact
- Reduced stopping performance from worn friction material
- Rust buildup on exposed rotor surfaces
- Extended service time from rotors that require extra cleaning before install
Installation Notes
Fits 2012-2018 Toyota Yaris, rear. Verify rear axle application before ordering and inspect caliper condition, slide hardware, and brake fluid level during service. The rotors are shipped dry and ready for installation, and the non-directional finish supports a faster bed-in process after assembly. Part number 4502-76148 should be matched to the vehicle’s rear brake configuration before installation.
Quality Assurance
DFC rotors are 100% inspected for critical dimensions and balance correction where required, then checked against OE specifications. The rotors include a 12-month warranty against defects in material and workmanship. Part number 4502-76148 is backed by DFC’s controlled machining and inspection process for consistent rear brake service on the Toyota Yaris.
Rear Brake Kit for Toyota Yaris
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit is built for rear brake service on the 2012-2018 Toyota Yaris. It combines coated rotors and matched friction material in one disc brake kit for a direct rear axle replacement.
Key Features
- Fits 2012-2018 Toyota Yaris, rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Rotors ship dry and are ready to install without extra cleaning
- Non-directional rotor finish supports even pad bed-in and smoother braking
- 5000 Advanced Brake Pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Part number 4502-76148
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads, part number 4502-76148, are engineered as a rear brake service kit for the Toyota Yaris. The rotors use G3000/G11H18 cast iron and are machined to OE-style tolerances, then finished with a non-directional surface for consistent pad contact. The coated rotor surface is designed to resist rust better than conventional paint or zinc finishes, while the dry packaging reduces prep time during installation. The 5000 Advanced pads are formulated for stable friction output and are assembled with shims to improve brake feel and reduce noise.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Issues This Kit Addresses
- Rear brake pulsation from worn or uneven rotors
- Brake noise caused by aged pads or poor pad-to-rotor contact
- Reduced stopping performance from worn friction material
- Rust buildup on exposed rotor surfaces
- Extended service time from rotors that require extra cleaning before install
Installation Notes
Fits 2012-2018 Toyota Yaris, rear. Verify rear axle application before ordering and inspect caliper condition, slide hardware, and brake fluid level during service. The rotors are shipped dry and ready for installation, and the non-directional finish supports a faster bed-in process after assembly. Part number 4502-76148 should be matched to the vehicle’s rear brake configuration before installation.
Quality Assurance
DFC rotors are 100% inspected for critical dimensions and balance correction where required, then checked against OE specifications. The rotors include a 12-month warranty against defects in material and workmanship. Part number 4502-76148 is backed by DFC’s controlled machining and inspection process for consistent rear brake service on the Toyota Yaris.
Original: $109.49
-65%$109.49
$38.32Description
Rear Brake Kit for Toyota Yaris
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit is built for rear brake service on the 2012-2018 Toyota Yaris. It combines coated rotors and matched friction material in one disc brake kit for a direct rear axle replacement.
Key Features
- Fits 2012-2018 Toyota Yaris, rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Rotors ship dry and are ready to install without extra cleaning
- Non-directional rotor finish supports even pad bed-in and smoother braking
- 5000 Advanced Brake Pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Part number 4502-76148
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads, part number 4502-76148, are engineered as a rear brake service kit for the Toyota Yaris. The rotors use G3000/G11H18 cast iron and are machined to OE-style tolerances, then finished with a non-directional surface for consistent pad contact. The coated rotor surface is designed to resist rust better than conventional paint or zinc finishes, while the dry packaging reduces prep time during installation. The 5000 Advanced pads are formulated for stable friction output and are assembled with shims to improve brake feel and reduce noise.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Issues This Kit Addresses
- Rear brake pulsation from worn or uneven rotors
- Brake noise caused by aged pads or poor pad-to-rotor contact
- Reduced stopping performance from worn friction material
- Rust buildup on exposed rotor surfaces
- Extended service time from rotors that require extra cleaning before install
Installation Notes
Fits 2012-2018 Toyota Yaris, rear. Verify rear axle application before ordering and inspect caliper condition, slide hardware, and brake fluid level during service. The rotors are shipped dry and ready for installation, and the non-directional finish supports a faster bed-in process after assembly. Part number 4502-76148 should be matched to the vehicle’s rear brake configuration before installation.
Quality Assurance
DFC rotors are 100% inspected for critical dimensions and balance correction where required, then checked against OE specifications. The rotors include a 12-month warranty against defects in material and workmanship. Part number 4502-76148 is backed by DFC’s controlled machining and inspection process for consistent rear brake service on the Toyota Yaris.
