Dynamite Friction 4502-74128 Disc Brake Kit - Rear
Rear Brake Kit for Audi A3 and Volkswagen Jetta
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit is a rear disc brake service kit built for specific OE-style fitment. It combines coated rear rotors with matched rear pads for 2010-2012 Audi A3 and 2013 Volkswagen Jetta applications, including part number 4502-74128.
Key Features
- Rear disc brake kit with rotors and pads in one package
- Fits 2013 Volkswagen Jetta, rear
- Fits 2010-2012 Audi A3, rear
- GeoSpec coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install
- Non-directional rotor finish supports even pad bed-in and quieter stops
- 5000 Advanced pads are post-cured and scorched for stable friction performance
- Rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Part number 4502-74128
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are engineered as a matched rear brake solution for the Audi A3 and Volkswagen Jetta. The rotors use G3000/G11H18 cast iron and are machined to OE-style tolerances, then finished with a non-directional surface to promote consistent pad contact. The coated rotor surface helps resist rust and is designed to be swept away during normal braking without extra prep. The 5000 Advanced pads are formulated for stable friction, reduced break-in time, and improved NVH control through premium shims. This part number 4502-74128 is a direct rear brake service option for drivers looking to restore braking performance on 2010-2012 Audi A3 and 2013 Volkswagen Jetta models.
Common Issues This Kit Can Address
- Rear brake pulsation from worn or uneven rotors
- Brake noise caused by aged pads or poor pad-to-rotor contact
- Reduced stopping performance from worn friction material
- Rust buildup on exposed rotor surfaces
- Extended brake service time when sourcing pads and rotors separately
Installation Notes and Tips
Confirm rear axle fitment before ordering: Fits 2013 Volkswagen Jetta, rear, and Fits 2010-2012 Audi A3, rear. Inspect calipers, slides, and brake fluid condition during service, and follow the vehicle manufacturer’s bedding procedure after installation. The rotors are shipped dry and ready to install, so no cleaning of oil-coated surfaces is required. Part number 4502-74128 should be matched to the vehicle’s rear brake configuration before assembly.
Quality Assurance
DFC states that each rotor is inspected for critical dimensions and balance, with vented rotors corrected as needed during the balancing process. The rotors are covered by a 12-month warranty against defects in material and workmanship. The 5000 Advanced pads are post-cured and scorched to support consistent friction characteristics from initial use.
Rear Brake Kit for Audi A3 and Volkswagen Jetta
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit is a rear disc brake service kit built for specific OE-style fitment. It combines coated rear rotors with matched rear pads for 2010-2012 Audi A3 and 2013 Volkswagen Jetta applications, including part number 4502-74128.
Key Features
- Rear disc brake kit with rotors and pads in one package
- Fits 2013 Volkswagen Jetta, rear
- Fits 2010-2012 Audi A3, rear
- GeoSpec coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install
- Non-directional rotor finish supports even pad bed-in and quieter stops
- 5000 Advanced pads are post-cured and scorched for stable friction performance
- Rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Part number 4502-74128
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are engineered as a matched rear brake solution for the Audi A3 and Volkswagen Jetta. The rotors use G3000/G11H18 cast iron and are machined to OE-style tolerances, then finished with a non-directional surface to promote consistent pad contact. The coated rotor surface helps resist rust and is designed to be swept away during normal braking without extra prep. The 5000 Advanced pads are formulated for stable friction, reduced break-in time, and improved NVH control through premium shims. This part number 4502-74128 is a direct rear brake service option for drivers looking to restore braking performance on 2010-2012 Audi A3 and 2013 Volkswagen Jetta models.
Common Issues This Kit Can Address
- Rear brake pulsation from worn or uneven rotors
- Brake noise caused by aged pads or poor pad-to-rotor contact
- Reduced stopping performance from worn friction material
- Rust buildup on exposed rotor surfaces
- Extended brake service time when sourcing pads and rotors separately
Installation Notes and Tips
Confirm rear axle fitment before ordering: Fits 2013 Volkswagen Jetta, rear, and Fits 2010-2012 Audi A3, rear. Inspect calipers, slides, and brake fluid condition during service, and follow the vehicle manufacturer’s bedding procedure after installation. The rotors are shipped dry and ready to install, so no cleaning of oil-coated surfaces is required. Part number 4502-74128 should be matched to the vehicle’s rear brake configuration before assembly.
Quality Assurance
DFC states that each rotor is inspected for critical dimensions and balance, with vented rotors corrected as needed during the balancing process. The rotors are covered by a 12-month warranty against defects in material and workmanship. The 5000 Advanced pads are post-cured and scorched to support consistent friction characteristics from initial use.
Original: $113.09
-65%$113.09
$39.58Description
Rear Brake Kit for Audi A3 and Volkswagen Jetta
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit is a rear disc brake service kit built for specific OE-style fitment. It combines coated rear rotors with matched rear pads for 2010-2012 Audi A3 and 2013 Volkswagen Jetta applications, including part number 4502-74128.
Key Features
- Rear disc brake kit with rotors and pads in one package
- Fits 2013 Volkswagen Jetta, rear
- Fits 2010-2012 Audi A3, rear
- GeoSpec coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install
- Non-directional rotor finish supports even pad bed-in and quieter stops
- 5000 Advanced pads are post-cured and scorched for stable friction performance
- Rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Part number 4502-74128
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are engineered as a matched rear brake solution for the Audi A3 and Volkswagen Jetta. The rotors use G3000/G11H18 cast iron and are machined to OE-style tolerances, then finished with a non-directional surface to promote consistent pad contact. The coated rotor surface helps resist rust and is designed to be swept away during normal braking without extra prep. The 5000 Advanced pads are formulated for stable friction, reduced break-in time, and improved NVH control through premium shims. This part number 4502-74128 is a direct rear brake service option for drivers looking to restore braking performance on 2010-2012 Audi A3 and 2013 Volkswagen Jetta models.
Common Issues This Kit Can Address
- Rear brake pulsation from worn or uneven rotors
- Brake noise caused by aged pads or poor pad-to-rotor contact
- Reduced stopping performance from worn friction material
- Rust buildup on exposed rotor surfaces
- Extended brake service time when sourcing pads and rotors separately
Installation Notes and Tips
Confirm rear axle fitment before ordering: Fits 2013 Volkswagen Jetta, rear, and Fits 2010-2012 Audi A3, rear. Inspect calipers, slides, and brake fluid condition during service, and follow the vehicle manufacturer’s bedding procedure after installation. The rotors are shipped dry and ready to install, so no cleaning of oil-coated surfaces is required. Part number 4502-74128 should be matched to the vehicle’s rear brake configuration before assembly.
Quality Assurance
DFC states that each rotor is inspected for critical dimensions and balance, with vented rotors corrected as needed during the balancing process. The rotors are covered by a 12-month warranty against defects in material and workmanship. The 5000 Advanced pads are post-cured and scorched to support consistent friction characteristics from initial use.
