Dynamite Friction 4502-74126 Disc Brake Kit - Front
Front Brake Kit for Volkswagen Bora
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit is a front disc brake service kit built for 2007-2010 Volkswagen Bora applications. Part number 4502-74126 combines coated rotors and matched friction material for a complete front brake replacement.
For Volkswagen Bora front brake service, this kit is engineered to deliver OE-style fitment, corrosion protection, and consistent stopping performance. It is a practical choice when replacing worn front rotors and pads on 2007-2010 Volkswagen Bora models, including Mexico-market applications listed in the fitment data.
Key Features
- Part number 4502-74126 front disc brake kit
- Fits 2007-2010 Volkswagen Bora, front
- DFC GEOSPEC coated rotors with silver-gray corrosion-resistant finish
- Rotors ship dry and ready to install, with no oil removal step
- Non-directional rotor finish supports even pad bed-in and smoother braking
- G3000/G11H18 cast iron rotor construction matched to OE specifications
- DFC 5000 Advanced Brake Pads with post-cured friction material
- Scorched pads for reduced initial break-in time
- Premium rubber-steel-rubber shims for improved NVH control
Product Details
The DFC GEOSPEC rotor line is built around coated brake rotors that resist rust better than conventional paint or zinc finishes. Each rotor is machined to tight tolerances, finished with a non-directional surface, and inspected for balance and critical dimensions before release. The 5000 Advanced Brake Pads are formulated for stable friction performance and are assembled with premium shims to help reduce noise, vibration, and harshness. Together, these components create a front brake kit suited to routine service on the Volkswagen Bora, with part number 4502-74126 identifying the complete application-specific package.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues This Kit Can Address
- Front brake rotor rust and surface corrosion
- Brake pad wear that reduces stopping performance
- Brake noise during light or moderate braking
- Uneven pad bedding after rotor replacement
- Vibration or harshness from worn front brake components
Installation Notes
Compatible With 2007-2010 Volkswagen Bora, front. The rotors are processed dry and ready to install, which can reduce prep time during service. For best results, clean the hub mounting surface, verify caliper condition, and follow the vehicle manufacturer’s torque and bedding procedures after installation. Part number 4502-74126 is intended as a front axle brake service kit, so confirm front-position fitment before ordering.
Quality Assurance
DFC GEOSPEC rotors are manufactured to OE specifications, then inspected for balance and critical dimensions after machining. The rotors include a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and scorched to support stable friction characteristics from the first stops.
Front Brake Kit for Volkswagen Bora
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit is a front disc brake service kit built for 2007-2010 Volkswagen Bora applications. Part number 4502-74126 combines coated rotors and matched friction material for a complete front brake replacement.
For Volkswagen Bora front brake service, this kit is engineered to deliver OE-style fitment, corrosion protection, and consistent stopping performance. It is a practical choice when replacing worn front rotors and pads on 2007-2010 Volkswagen Bora models, including Mexico-market applications listed in the fitment data.
Key Features
- Part number 4502-74126 front disc brake kit
- Fits 2007-2010 Volkswagen Bora, front
- DFC GEOSPEC coated rotors with silver-gray corrosion-resistant finish
- Rotors ship dry and ready to install, with no oil removal step
- Non-directional rotor finish supports even pad bed-in and smoother braking
- G3000/G11H18 cast iron rotor construction matched to OE specifications
- DFC 5000 Advanced Brake Pads with post-cured friction material
- Scorched pads for reduced initial break-in time
- Premium rubber-steel-rubber shims for improved NVH control
Product Details
The DFC GEOSPEC rotor line is built around coated brake rotors that resist rust better than conventional paint or zinc finishes. Each rotor is machined to tight tolerances, finished with a non-directional surface, and inspected for balance and critical dimensions before release. The 5000 Advanced Brake Pads are formulated for stable friction performance and are assembled with premium shims to help reduce noise, vibration, and harshness. Together, these components create a front brake kit suited to routine service on the Volkswagen Bora, with part number 4502-74126 identifying the complete application-specific package.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues This Kit Can Address
- Front brake rotor rust and surface corrosion
- Brake pad wear that reduces stopping performance
- Brake noise during light or moderate braking
- Uneven pad bedding after rotor replacement
- Vibration or harshness from worn front brake components
Installation Notes
Compatible With 2007-2010 Volkswagen Bora, front. The rotors are processed dry and ready to install, which can reduce prep time during service. For best results, clean the hub mounting surface, verify caliper condition, and follow the vehicle manufacturer’s torque and bedding procedures after installation. Part number 4502-74126 is intended as a front axle brake service kit, so confirm front-position fitment before ordering.
Quality Assurance
DFC GEOSPEC rotors are manufactured to OE specifications, then inspected for balance and critical dimensions after machining. The rotors include a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and scorched to support stable friction characteristics from the first stops.
Original: $173.66
-65%$173.66
$60.78Description
Front Brake Kit for Volkswagen Bora
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit is a front disc brake service kit built for 2007-2010 Volkswagen Bora applications. Part number 4502-74126 combines coated rotors and matched friction material for a complete front brake replacement.
For Volkswagen Bora front brake service, this kit is engineered to deliver OE-style fitment, corrosion protection, and consistent stopping performance. It is a practical choice when replacing worn front rotors and pads on 2007-2010 Volkswagen Bora models, including Mexico-market applications listed in the fitment data.
Key Features
- Part number 4502-74126 front disc brake kit
- Fits 2007-2010 Volkswagen Bora, front
- DFC GEOSPEC coated rotors with silver-gray corrosion-resistant finish
- Rotors ship dry and ready to install, with no oil removal step
- Non-directional rotor finish supports even pad bed-in and smoother braking
- G3000/G11H18 cast iron rotor construction matched to OE specifications
- DFC 5000 Advanced Brake Pads with post-cured friction material
- Scorched pads for reduced initial break-in time
- Premium rubber-steel-rubber shims for improved NVH control
Product Details
The DFC GEOSPEC rotor line is built around coated brake rotors that resist rust better than conventional paint or zinc finishes. Each rotor is machined to tight tolerances, finished with a non-directional surface, and inspected for balance and critical dimensions before release. The 5000 Advanced Brake Pads are formulated for stable friction performance and are assembled with premium shims to help reduce noise, vibration, and harshness. Together, these components create a front brake kit suited to routine service on the Volkswagen Bora, with part number 4502-74126 identifying the complete application-specific package.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues This Kit Can Address
- Front brake rotor rust and surface corrosion
- Brake pad wear that reduces stopping performance
- Brake noise during light or moderate braking
- Uneven pad bedding after rotor replacement
- Vibration or harshness from worn front brake components
Installation Notes
Compatible With 2007-2010 Volkswagen Bora, front. The rotors are processed dry and ready to install, which can reduce prep time during service. For best results, clean the hub mounting surface, verify caliper condition, and follow the vehicle manufacturer’s torque and bedding procedures after installation. Part number 4502-74126 is intended as a front axle brake service kit, so confirm front-position fitment before ordering.
Quality Assurance
DFC GEOSPEC rotors are manufactured to OE specifications, then inspected for balance and critical dimensions after machining. The rotors include a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and scorched to support stable friction characteristics from the first stops.
