Dynamite Friction 4502-74081 Disc Brake Kit - Rear
Rear Brake Kit for Audi A6
Restore rear braking performance with the Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit, part number 4502-74081. This rear disc brake kit is built for 1999-2001 Audi A6 applications and combines coated rotors with matched friction material for a service-ready brake replacement.
Compatible With 1999-2001 Audi A6 rear brake service, including 1999 Audi A6 rear with 15 inch wheels and 16 inch wheels, plus 2000-2001 Audi A6 rear applications. The DFC GEOSPEC rotor finish helps resist rust, while the 5000 Advanced pads are formulated for stable friction and quieter operation.
- Rear disc brake kit with rotors and pads
- DFC GEOSPEC coated rotors with silver-gray corrosion-resistant finish
- Dry-processed, dry-shipped rotors ready for installation
- Non-directional rotor finish for more even pad bed-in
- 100% inspected rotors for critical dimensions and balance
- DFC 5000 Advanced pads with post-cured friction material
- Scorched pads to reduce initial break-in time
- Rubber-steel-rubber shims for improved NVH control
Product Details
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads line is engineered as a complete brake service solution for drivers who want OE-style fit and consistent braking behavior. The rotors are cast to G3000/G11H18 specifications, machined to tight tolerances, and finished with a non-directional surface to support smoother stops and more uniform pad contact. The pads are built for modern vehicle braking demands and assembled with premium shims to help reduce noise, vibration, and harshness. Part number 4502-74081 is a direct rear brake service option for Audi A6 models listed in the fitment data.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues This Kit Can Address
- Rear brake pulsation from worn or uneven rotors
- Brake noise caused by aged pads or poor pad-to-rotor contact
- Rust buildup on exposed rotor surfaces
- Extended stopping distance from worn friction material
- Uneven braking feel during routine rear brake service
Installation Notes and Tips
These rotors are processed dry and ready to install, which helps reduce prep time during brake service. For best results, clean the hub mounting surface before installation, verify rotor runout, and follow the vehicle manufacturer’s brake bedding procedure after installation. Confirm rear axle fitment for 1999-2001 Audi A6 models before ordering, including the 1999 Audi A6 rear applications noted for 15 inch and 16 inch wheels.
Quality Assurance
Each rotor undergoes machining, balance correction where needed, and final inspection of critical dimensions to meet OE specifications. DFC includes a 12-month warranty against defects in material and workmanship on the rotors.
Rear Brake Kit for Audi A6
Restore rear braking performance with the Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit, part number 4502-74081. This rear disc brake kit is built for 1999-2001 Audi A6 applications and combines coated rotors with matched friction material for a service-ready brake replacement.
Compatible With 1999-2001 Audi A6 rear brake service, including 1999 Audi A6 rear with 15 inch wheels and 16 inch wheels, plus 2000-2001 Audi A6 rear applications. The DFC GEOSPEC rotor finish helps resist rust, while the 5000 Advanced pads are formulated for stable friction and quieter operation.
- Rear disc brake kit with rotors and pads
- DFC GEOSPEC coated rotors with silver-gray corrosion-resistant finish
- Dry-processed, dry-shipped rotors ready for installation
- Non-directional rotor finish for more even pad bed-in
- 100% inspected rotors for critical dimensions and balance
- DFC 5000 Advanced pads with post-cured friction material
- Scorched pads to reduce initial break-in time
- Rubber-steel-rubber shims for improved NVH control
Product Details
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads line is engineered as a complete brake service solution for drivers who want OE-style fit and consistent braking behavior. The rotors are cast to G3000/G11H18 specifications, machined to tight tolerances, and finished with a non-directional surface to support smoother stops and more uniform pad contact. The pads are built for modern vehicle braking demands and assembled with premium shims to help reduce noise, vibration, and harshness. Part number 4502-74081 is a direct rear brake service option for Audi A6 models listed in the fitment data.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues This Kit Can Address
- Rear brake pulsation from worn or uneven rotors
- Brake noise caused by aged pads or poor pad-to-rotor contact
- Rust buildup on exposed rotor surfaces
- Extended stopping distance from worn friction material
- Uneven braking feel during routine rear brake service
Installation Notes and Tips
These rotors are processed dry and ready to install, which helps reduce prep time during brake service. For best results, clean the hub mounting surface before installation, verify rotor runout, and follow the vehicle manufacturer’s brake bedding procedure after installation. Confirm rear axle fitment for 1999-2001 Audi A6 models before ordering, including the 1999 Audi A6 rear applications noted for 15 inch and 16 inch wheels.
Quality Assurance
Each rotor undergoes machining, balance correction where needed, and final inspection of critical dimensions to meet OE specifications. DFC includes a 12-month warranty against defects in material and workmanship on the rotors.
Original: $113.70
-65%$113.70
$39.80Description
Rear Brake Kit for Audi A6
Restore rear braking performance with the Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit, part number 4502-74081. This rear disc brake kit is built for 1999-2001 Audi A6 applications and combines coated rotors with matched friction material for a service-ready brake replacement.
Compatible With 1999-2001 Audi A6 rear brake service, including 1999 Audi A6 rear with 15 inch wheels and 16 inch wheels, plus 2000-2001 Audi A6 rear applications. The DFC GEOSPEC rotor finish helps resist rust, while the 5000 Advanced pads are formulated for stable friction and quieter operation.
- Rear disc brake kit with rotors and pads
- DFC GEOSPEC coated rotors with silver-gray corrosion-resistant finish
- Dry-processed, dry-shipped rotors ready for installation
- Non-directional rotor finish for more even pad bed-in
- 100% inspected rotors for critical dimensions and balance
- DFC 5000 Advanced pads with post-cured friction material
- Scorched pads to reduce initial break-in time
- Rubber-steel-rubber shims for improved NVH control
Product Details
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads line is engineered as a complete brake service solution for drivers who want OE-style fit and consistent braking behavior. The rotors are cast to G3000/G11H18 specifications, machined to tight tolerances, and finished with a non-directional surface to support smoother stops and more uniform pad contact. The pads are built for modern vehicle braking demands and assembled with premium shims to help reduce noise, vibration, and harshness. Part number 4502-74081 is a direct rear brake service option for Audi A6 models listed in the fitment data.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues This Kit Can Address
- Rear brake pulsation from worn or uneven rotors
- Brake noise caused by aged pads or poor pad-to-rotor contact
- Rust buildup on exposed rotor surfaces
- Extended stopping distance from worn friction material
- Uneven braking feel during routine rear brake service
Installation Notes and Tips
These rotors are processed dry and ready to install, which helps reduce prep time during brake service. For best results, clean the hub mounting surface before installation, verify rotor runout, and follow the vehicle manufacturer’s brake bedding procedure after installation. Confirm rear axle fitment for 1999-2001 Audi A6 models before ordering, including the 1999 Audi A6 rear applications noted for 15 inch and 16 inch wheels.
Quality Assurance
Each rotor undergoes machining, balance correction where needed, and final inspection of critical dimensions to meet OE specifications. DFC includes a 12-month warranty against defects in material and workmanship on the rotors.
