Dynamite Friction 4502-73124 Disc Brake Kit - Rear
Rear Brake Kit for Audi S6
Restore rear braking performance on the 2007-2011 Audi S6 with the DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit, part number 4502-73124. This rear disc brake kit combines coated rotors and matched pads in one package for a straightforward brake service on the Audi S6 rear axle.
Key Features
- Complete rear disc brake kit with rotors and pads
- Fits 2007-2011 Audi S6, rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install
- Non-directional rotor finish supports even pad bed-in and smoother braking
- DFC 5000 Advanced pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Part number 4502-73124
Product Line Details
The DFC GEOSPEC rotor and 5000 Advanced pad combination is built as a matched service kit for drivers who want the friction material and rotor surface to work together from the start. The coated rotor design helps resist rust better than conventional painted or zinc-coated finishes, while the pad formulation is prepared to reduce initial break-in time and deliver consistent stopping response.
Detailed Description
Compatible with rear brake service on the 2007, 2008, 2009, 2010, and 2011 Audi S6, this kit is engineered to meet OE-style expectations for durability, stability, and fitment. The rotors are cast to G3000/G11H18 specifications, machined to tight tolerances, and inspected for critical dimensions and balance. The pads are formulated for stable friction characteristics and quieter operation, making this a practical choice for Audi S6 rear brake replacement. Part number 4502-73124 is a direct reference for this rear brake kit.
What This Kit Helps Address
- Rear brake wear on an Audi S6
- Rotor rust and surface corrosion
- Brake pulsation from worn or uneven rotors
- Noisy braking from aged pads and hardware interfaces
- Longer stopping distances caused by worn friction components
Installation Notes and Tips
Install on the rear axle only for the listed Audi S6 applications. Clean the rotor friction surfaces before installation if needed, and follow standard brake service procedures for pad bedding after the job is complete. Verify rotor orientation and inspect caliper condition, slide pins, and brake fluid level during service. Part number 4502-73124 should be matched to the vehicle’s rear brake configuration before installation.
Quality Assurance
Each DFC GEOSPEC rotor is 100% inspected after machining to confirm critical specifications, and vented rotors are balance-checked and corrected when required. The rotors include a 12-month warranty against defects in material and workmanship.
Rear Brake Kit for Audi S6
Restore rear braking performance on the 2007-2011 Audi S6 with the DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit, part number 4502-73124. This rear disc brake kit combines coated rotors and matched pads in one package for a straightforward brake service on the Audi S6 rear axle.
Key Features
- Complete rear disc brake kit with rotors and pads
- Fits 2007-2011 Audi S6, rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install
- Non-directional rotor finish supports even pad bed-in and smoother braking
- DFC 5000 Advanced pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Part number 4502-73124
Product Line Details
The DFC GEOSPEC rotor and 5000 Advanced pad combination is built as a matched service kit for drivers who want the friction material and rotor surface to work together from the start. The coated rotor design helps resist rust better than conventional painted or zinc-coated finishes, while the pad formulation is prepared to reduce initial break-in time and deliver consistent stopping response.
Detailed Description
Compatible with rear brake service on the 2007, 2008, 2009, 2010, and 2011 Audi S6, this kit is engineered to meet OE-style expectations for durability, stability, and fitment. The rotors are cast to G3000/G11H18 specifications, machined to tight tolerances, and inspected for critical dimensions and balance. The pads are formulated for stable friction characteristics and quieter operation, making this a practical choice for Audi S6 rear brake replacement. Part number 4502-73124 is a direct reference for this rear brake kit.
What This Kit Helps Address
- Rear brake wear on an Audi S6
- Rotor rust and surface corrosion
- Brake pulsation from worn or uneven rotors
- Noisy braking from aged pads and hardware interfaces
- Longer stopping distances caused by worn friction components
Installation Notes and Tips
Install on the rear axle only for the listed Audi S6 applications. Clean the rotor friction surfaces before installation if needed, and follow standard brake service procedures for pad bedding after the job is complete. Verify rotor orientation and inspect caliper condition, slide pins, and brake fluid level during service. Part number 4502-73124 should be matched to the vehicle’s rear brake configuration before installation.
Quality Assurance
Each DFC GEOSPEC rotor is 100% inspected after machining to confirm critical specifications, and vented rotors are balance-checked and corrected when required. The rotors include a 12-month warranty against defects in material and workmanship.
Original: $185.28
-65%$185.28
$64.85Description
Rear Brake Kit for Audi S6
Restore rear braking performance on the 2007-2011 Audi S6 with the DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit, part number 4502-73124. This rear disc brake kit combines coated rotors and matched pads in one package for a straightforward brake service on the Audi S6 rear axle.
Key Features
- Complete rear disc brake kit with rotors and pads
- Fits 2007-2011 Audi S6, rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install
- Non-directional rotor finish supports even pad bed-in and smoother braking
- DFC 5000 Advanced pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Part number 4502-73124
Product Line Details
The DFC GEOSPEC rotor and 5000 Advanced pad combination is built as a matched service kit for drivers who want the friction material and rotor surface to work together from the start. The coated rotor design helps resist rust better than conventional painted or zinc-coated finishes, while the pad formulation is prepared to reduce initial break-in time and deliver consistent stopping response.
Detailed Description
Compatible with rear brake service on the 2007, 2008, 2009, 2010, and 2011 Audi S6, this kit is engineered to meet OE-style expectations for durability, stability, and fitment. The rotors are cast to G3000/G11H18 specifications, machined to tight tolerances, and inspected for critical dimensions and balance. The pads are formulated for stable friction characteristics and quieter operation, making this a practical choice for Audi S6 rear brake replacement. Part number 4502-73124 is a direct reference for this rear brake kit.
What This Kit Helps Address
- Rear brake wear on an Audi S6
- Rotor rust and surface corrosion
- Brake pulsation from worn or uneven rotors
- Noisy braking from aged pads and hardware interfaces
- Longer stopping distances caused by worn friction components
Installation Notes and Tips
Install on the rear axle only for the listed Audi S6 applications. Clean the rotor friction surfaces before installation if needed, and follow standard brake service procedures for pad bedding after the job is complete. Verify rotor orientation and inspect caliper condition, slide pins, and brake fluid level during service. Part number 4502-73124 should be matched to the vehicle’s rear brake configuration before installation.
Quality Assurance
Each DFC GEOSPEC rotor is 100% inspected after machining to confirm critical specifications, and vented rotors are balance-checked and corrected when required. The rotors include a 12-month warranty against defects in material and workmanship.
