Dynamite Friction 4502-73089 Disc Brake Kit - Rear
Rear Brake Kit for Audi S4
Restore braking performance on a 2000-2002 Audi S4 with the DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit, part number 4502-73089. This rear disc brake kit combines coated rotors and matched friction material for a service-ready replacement built around OE-style specifications.
Key Features
- Compatible with 2000-2002 Audi S4 rear brake service
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed, dry-shipped rotors ready for installation
- Non-directional rotor finish supports even pad bed-in and smoother braking
- DFC 5000 Advanced Brake Pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Part number 4502-73089 for rear axle brake replacement
Product Line Details
The DFC GEOSPEC rotor line is built for OE-style durability and fitment, using G3000/G11H18 cast iron and precision machining to tight tolerances. The coated surface helps resist rust better than conventional paint or zinc finishes, while the non-directional machining pattern supports quieter operation and more consistent pad contact. The 5000 Advanced Brake Pads line is formulated for stable friction output and reduced initial break-in effort.
Detailed Description
This rear brake kit is a direct service solution for the Audi S4, combining DFC GEOSPEC coated rotors with DFC 5000 Advanced Brake Pads in one package. The rotors are machined to OE specifications, balanced where required, and inspected for critical dimensions before release. The pads are prepared for stable stopping performance and improved NVH control, making this kit a practical choice for rear brake maintenance on the 2000-2002 Audi S4. Part number 4502-73089 is the correct reference for this rear application.
Common Problems This Kit Can Address
- Rear brake pulsation from worn or uneven rotors
- Rust buildup on exposed rotor surfaces
- Brake noise caused by aged pads and worn friction material
- Reduced stopping consistency from heat-cycled brake components
- Extended service time from cleaning oil-coated replacement rotors
Installation Notes and Tips
Compatible With 2000-2002 Audi S4 rear brake service. Verify rear axle application before ordering and inspect caliper condition, slide hardware, and brake fluid condition during service. The rotors are shipped dry and ready to install, which helps reduce prep time during a standard brake job. Follow proper bedding procedures after installation to help the pads and rotors seat evenly.
Quality Assurance
DFC GEOSPEC rotors are manufactured to OE specifications and undergo 100% inspection of critical attributes after machining. Vented rotors are also checked for balance and corrected when necessary. This kit includes a 12-month warranty against defects in material and workmanship.
Rear Brake Kit for Audi S4
Restore braking performance on a 2000-2002 Audi S4 with the DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit, part number 4502-73089. This rear disc brake kit combines coated rotors and matched friction material for a service-ready replacement built around OE-style specifications.
Key Features
- Compatible with 2000-2002 Audi S4 rear brake service
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed, dry-shipped rotors ready for installation
- Non-directional rotor finish supports even pad bed-in and smoother braking
- DFC 5000 Advanced Brake Pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Part number 4502-73089 for rear axle brake replacement
Product Line Details
The DFC GEOSPEC rotor line is built for OE-style durability and fitment, using G3000/G11H18 cast iron and precision machining to tight tolerances. The coated surface helps resist rust better than conventional paint or zinc finishes, while the non-directional machining pattern supports quieter operation and more consistent pad contact. The 5000 Advanced Brake Pads line is formulated for stable friction output and reduced initial break-in effort.
Detailed Description
This rear brake kit is a direct service solution for the Audi S4, combining DFC GEOSPEC coated rotors with DFC 5000 Advanced Brake Pads in one package. The rotors are machined to OE specifications, balanced where required, and inspected for critical dimensions before release. The pads are prepared for stable stopping performance and improved NVH control, making this kit a practical choice for rear brake maintenance on the 2000-2002 Audi S4. Part number 4502-73089 is the correct reference for this rear application.
Common Problems This Kit Can Address
- Rear brake pulsation from worn or uneven rotors
- Rust buildup on exposed rotor surfaces
- Brake noise caused by aged pads and worn friction material
- Reduced stopping consistency from heat-cycled brake components
- Extended service time from cleaning oil-coated replacement rotors
Installation Notes and Tips
Compatible With 2000-2002 Audi S4 rear brake service. Verify rear axle application before ordering and inspect caliper condition, slide hardware, and brake fluid condition during service. The rotors are shipped dry and ready to install, which helps reduce prep time during a standard brake job. Follow proper bedding procedures after installation to help the pads and rotors seat evenly.
Quality Assurance
DFC GEOSPEC rotors are manufactured to OE specifications and undergo 100% inspection of critical attributes after machining. Vented rotors are also checked for balance and corrected when necessary. This kit includes a 12-month warranty against defects in material and workmanship.
Description
Rear Brake Kit for Audi S4
Restore braking performance on a 2000-2002 Audi S4 with the DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit, part number 4502-73089. This rear disc brake kit combines coated rotors and matched friction material for a service-ready replacement built around OE-style specifications.
Key Features
- Compatible with 2000-2002 Audi S4 rear brake service
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed, dry-shipped rotors ready for installation
- Non-directional rotor finish supports even pad bed-in and smoother braking
- DFC 5000 Advanced Brake Pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Part number 4502-73089 for rear axle brake replacement
Product Line Details
The DFC GEOSPEC rotor line is built for OE-style durability and fitment, using G3000/G11H18 cast iron and precision machining to tight tolerances. The coated surface helps resist rust better than conventional paint or zinc finishes, while the non-directional machining pattern supports quieter operation and more consistent pad contact. The 5000 Advanced Brake Pads line is formulated for stable friction output and reduced initial break-in effort.
Detailed Description
This rear brake kit is a direct service solution for the Audi S4, combining DFC GEOSPEC coated rotors with DFC 5000 Advanced Brake Pads in one package. The rotors are machined to OE specifications, balanced where required, and inspected for critical dimensions before release. The pads are prepared for stable stopping performance and improved NVH control, making this kit a practical choice for rear brake maintenance on the 2000-2002 Audi S4. Part number 4502-73089 is the correct reference for this rear application.
Common Problems This Kit Can Address
- Rear brake pulsation from worn or uneven rotors
- Rust buildup on exposed rotor surfaces
- Brake noise caused by aged pads and worn friction material
- Reduced stopping consistency from heat-cycled brake components
- Extended service time from cleaning oil-coated replacement rotors
Installation Notes and Tips
Compatible With 2000-2002 Audi S4 rear brake service. Verify rear axle application before ordering and inspect caliper condition, slide hardware, and brake fluid condition during service. The rotors are shipped dry and ready to install, which helps reduce prep time during a standard brake job. Follow proper bedding procedures after installation to help the pads and rotors seat evenly.
Quality Assurance
DFC GEOSPEC rotors are manufactured to OE specifications and undergo 100% inspection of critical attributes after machining. Vented rotors are also checked for balance and corrected when necessary. This kit includes a 12-month warranty against defects in material and workmanship.
