Dynamite Friction 4502-68018 Disc Brake Kit - Front
Front Brake Kit for Brembo-Equipped 350Z and G35
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit combines coated front rotors and matched pads in one service package. This front disc brake kit is built for 2003-2008 Nissan 350Z and 2003-2004 INFINITI G35 models with Brembo brakes, giving you a direct-fit brake service solution for the front axle.
Part number 4502-68018 is designed for drivers looking for a front brake kit for 2003-2008 Nissan 350Z Brembo brakes or 2003-2004 INFINITI G35 Brembo brakes. The kit pairs DFC GEOSPEC coated rotors with DFC 5000 Advanced pads for OE-style fitment, corrosion protection, and consistent braking performance.
Key Features
- Complete front disc brake kit with rotors and pads
- Compatible with 2003-2008 Nissan 350Z, front, Brembo brakes
- Compatible with 2003-2004 INFINITI G35, front, Brembo brakes
- DFC GEOSPEC coated rotors with silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install
- Non-directional rotor finish supports even pad bed-in and smoother stops
- DFC 5000 Advanced pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Part number: 4502-68018
Product Details
DFC GEOSPEC rotors are cast to G3000/G11H18 specifications and machined to tight tolerances for durability and stability. The coated surface helps resist rust better than conventional paint or zinc finishes, while the dry-ready design eliminates extra prep before installation. DFC 5000 Advanced pads are formulated for axle-specific braking demands and are assembled with premium shims to improve pedal feel and NVH control. This makes the kit a practical choice for a front brake job on a Nissan 350Z or INFINITI G35 with Brembo brakes.
Common Brake Issues This Kit Addresses
- Front brake pulsation from worn or uneven rotors
- Brake noise caused by aged pads or poor pad-to-rotor contact
- Rust buildup on exposed rotor surfaces
- Reduced stopping performance from worn friction material
- Longer service time caused by rotors that require extra cleaning before installation
Installation Notes and Tips
Use this kit for the front axle only. Confirm Brembo brake equipment before ordering, since fitment is specific to those applications. Inspect calipers, slides, and brake fluid condition during service, and follow the vehicle manufacturer’s brake bedding procedure after installation. The rotors are shipped dry and ready to install, so no oil removal step is required.
Quality Assurance
Each DFC GEOSPEC rotor is 100% inspected for critical dimensions and balance, with vented rotors corrected as needed during electronic mill-balancing. Every rotor includes a 12-month warranty against defects in material and workmanship. Part number 4502-68018 is built to OE-style specifications for front brake service on the listed Nissan and INFINITI applications.
Front Brake Kit for Brembo-Equipped 350Z and G35
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit combines coated front rotors and matched pads in one service package. This front disc brake kit is built for 2003-2008 Nissan 350Z and 2003-2004 INFINITI G35 models with Brembo brakes, giving you a direct-fit brake service solution for the front axle.
Part number 4502-68018 is designed for drivers looking for a front brake kit for 2003-2008 Nissan 350Z Brembo brakes or 2003-2004 INFINITI G35 Brembo brakes. The kit pairs DFC GEOSPEC coated rotors with DFC 5000 Advanced pads for OE-style fitment, corrosion protection, and consistent braking performance.
Key Features
- Complete front disc brake kit with rotors and pads
- Compatible with 2003-2008 Nissan 350Z, front, Brembo brakes
- Compatible with 2003-2004 INFINITI G35, front, Brembo brakes
- DFC GEOSPEC coated rotors with silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install
- Non-directional rotor finish supports even pad bed-in and smoother stops
- DFC 5000 Advanced pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Part number: 4502-68018
Product Details
DFC GEOSPEC rotors are cast to G3000/G11H18 specifications and machined to tight tolerances for durability and stability. The coated surface helps resist rust better than conventional paint or zinc finishes, while the dry-ready design eliminates extra prep before installation. DFC 5000 Advanced pads are formulated for axle-specific braking demands and are assembled with premium shims to improve pedal feel and NVH control. This makes the kit a practical choice for a front brake job on a Nissan 350Z or INFINITI G35 with Brembo brakes.
Common Brake Issues This Kit Addresses
- Front brake pulsation from worn or uneven rotors
- Brake noise caused by aged pads or poor pad-to-rotor contact
- Rust buildup on exposed rotor surfaces
- Reduced stopping performance from worn friction material
- Longer service time caused by rotors that require extra cleaning before installation
Installation Notes and Tips
Use this kit for the front axle only. Confirm Brembo brake equipment before ordering, since fitment is specific to those applications. Inspect calipers, slides, and brake fluid condition during service, and follow the vehicle manufacturer’s brake bedding procedure after installation. The rotors are shipped dry and ready to install, so no oil removal step is required.
Quality Assurance
Each DFC GEOSPEC rotor is 100% inspected for critical dimensions and balance, with vented rotors corrected as needed during electronic mill-balancing. Every rotor includes a 12-month warranty against defects in material and workmanship. Part number 4502-68018 is built to OE-style specifications for front brake service on the listed Nissan and INFINITI applications.
Original: $218.00
-65%$218.00
$76.30Description
Front Brake Kit for Brembo-Equipped 350Z and G35
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit combines coated front rotors and matched pads in one service package. This front disc brake kit is built for 2003-2008 Nissan 350Z and 2003-2004 INFINITI G35 models with Brembo brakes, giving you a direct-fit brake service solution for the front axle.
Part number 4502-68018 is designed for drivers looking for a front brake kit for 2003-2008 Nissan 350Z Brembo brakes or 2003-2004 INFINITI G35 Brembo brakes. The kit pairs DFC GEOSPEC coated rotors with DFC 5000 Advanced pads for OE-style fitment, corrosion protection, and consistent braking performance.
Key Features
- Complete front disc brake kit with rotors and pads
- Compatible with 2003-2008 Nissan 350Z, front, Brembo brakes
- Compatible with 2003-2004 INFINITI G35, front, Brembo brakes
- DFC GEOSPEC coated rotors with silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install
- Non-directional rotor finish supports even pad bed-in and smoother stops
- DFC 5000 Advanced pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Part number: 4502-68018
Product Details
DFC GEOSPEC rotors are cast to G3000/G11H18 specifications and machined to tight tolerances for durability and stability. The coated surface helps resist rust better than conventional paint or zinc finishes, while the dry-ready design eliminates extra prep before installation. DFC 5000 Advanced pads are formulated for axle-specific braking demands and are assembled with premium shims to improve pedal feel and NVH control. This makes the kit a practical choice for a front brake job on a Nissan 350Z or INFINITI G35 with Brembo brakes.
Common Brake Issues This Kit Addresses
- Front brake pulsation from worn or uneven rotors
- Brake noise caused by aged pads or poor pad-to-rotor contact
- Rust buildup on exposed rotor surfaces
- Reduced stopping performance from worn friction material
- Longer service time caused by rotors that require extra cleaning before installation
Installation Notes and Tips
Use this kit for the front axle only. Confirm Brembo brake equipment before ordering, since fitment is specific to those applications. Inspect calipers, slides, and brake fluid condition during service, and follow the vehicle manufacturer’s brake bedding procedure after installation. The rotors are shipped dry and ready to install, so no oil removal step is required.
Quality Assurance
Each DFC GEOSPEC rotor is 100% inspected for critical dimensions and balance, with vented rotors corrected as needed during electronic mill-balancing. Every rotor includes a 12-month warranty against defects in material and workmanship. Part number 4502-68018 is built to OE-style specifications for front brake service on the listed Nissan and INFINITI applications.
