Dynamite Friction 4502-67120 Disc Brake Kit - Front
Front Brake Kit for Pathfinder and QX4
Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads, part number 4502-67120, is a front disc brake kit built for specific Nissan and INFINITI applications. It combines coated rotors and matched pads for a service-ready brake replacement on the front axle.
Key Features
- Front disc brake kit with rotors and pads
- DFC GEOSPEC coated rotors with corrosion-resistant silver-gray finish
- Dry-processed rotors arrive ready to install
- Non-directional rotor finish supports even pad bed-in and smoother stopping
- 5000 Advanced Brake Pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- OE-spec cast iron formulation and tight machining tolerances
- Part number 4502-67120 for front brake service
Product Line Details
The DFC GEOSPEC rotor line focuses on corrosion protection and OE-style fitment. The coated surface is designed to resist rust better than conventional paint or zinc finishes, while the dry packaging helps reduce prep time during brake service. The 5000 Advanced Brake Pads are engineered for consistent friction characteristics and quieter operation through their shim design and finishing process.
Detailed Description
This brake kit is built for 1996-1997 Nissan Pathfinder front, 1997 INFINITI QX4 front, and 1998 Nissan Pathfinder front with vehicle build date to 12/98. The rotors are machined to tight tolerances, balanced where required, and inspected for critical dimensions to meet OE specifications. The pads are formulated for stable braking response from the first stop, making this a practical choice for front brake repair on a Nissan Pathfinder or INFINITI QX4. Part number 4502-67120 is a direct reference for this front brake kit application.
What It Helps Address
- Front brake noise during stopping
- Rust buildup on exposed rotor surfaces
- Uneven pad bedding after rotor replacement
- Brake vibration caused by worn front rotors
- Reduced stopping performance from worn pads
Installation Notes and Tips
Use this kit for front axle service only. Confirm vehicle build date on 1998 Nissan Pathfinder models, since this application is limited to vehicles built through 12/98. Clean the hub mounting surface before installation, and follow proper brake bedding procedures after service to help the pads and rotors seat evenly. Verify caliper condition, slide movement, and brake fluid level during the repair.
Quality Assurance
DFC GEOSPEC rotors are 100% inspected after machining, and vented rotors are balance-checked and corrected when needed. Each rotor is covered by a 12-month warranty against defects in material and workmanship. The 5000 Advanced Brake Pads are post-cured and scorched to support stable friction performance and consistent braking characteristics.
Front Brake Kit for Pathfinder and QX4
Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads, part number 4502-67120, is a front disc brake kit built for specific Nissan and INFINITI applications. It combines coated rotors and matched pads for a service-ready brake replacement on the front axle.
Key Features
- Front disc brake kit with rotors and pads
- DFC GEOSPEC coated rotors with corrosion-resistant silver-gray finish
- Dry-processed rotors arrive ready to install
- Non-directional rotor finish supports even pad bed-in and smoother stopping
- 5000 Advanced Brake Pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- OE-spec cast iron formulation and tight machining tolerances
- Part number 4502-67120 for front brake service
Product Line Details
The DFC GEOSPEC rotor line focuses on corrosion protection and OE-style fitment. The coated surface is designed to resist rust better than conventional paint or zinc finishes, while the dry packaging helps reduce prep time during brake service. The 5000 Advanced Brake Pads are engineered for consistent friction characteristics and quieter operation through their shim design and finishing process.
Detailed Description
This brake kit is built for 1996-1997 Nissan Pathfinder front, 1997 INFINITI QX4 front, and 1998 Nissan Pathfinder front with vehicle build date to 12/98. The rotors are machined to tight tolerances, balanced where required, and inspected for critical dimensions to meet OE specifications. The pads are formulated for stable braking response from the first stop, making this a practical choice for front brake repair on a Nissan Pathfinder or INFINITI QX4. Part number 4502-67120 is a direct reference for this front brake kit application.
What It Helps Address
- Front brake noise during stopping
- Rust buildup on exposed rotor surfaces
- Uneven pad bedding after rotor replacement
- Brake vibration caused by worn front rotors
- Reduced stopping performance from worn pads
Installation Notes and Tips
Use this kit for front axle service only. Confirm vehicle build date on 1998 Nissan Pathfinder models, since this application is limited to vehicles built through 12/98. Clean the hub mounting surface before installation, and follow proper brake bedding procedures after service to help the pads and rotors seat evenly. Verify caliper condition, slide movement, and brake fluid level during the repair.
Quality Assurance
DFC GEOSPEC rotors are 100% inspected after machining, and vented rotors are balance-checked and corrected when needed. Each rotor is covered by a 12-month warranty against defects in material and workmanship. The 5000 Advanced Brake Pads are post-cured and scorched to support stable friction performance and consistent braking characteristics.
Description
Front Brake Kit for Pathfinder and QX4
Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads, part number 4502-67120, is a front disc brake kit built for specific Nissan and INFINITI applications. It combines coated rotors and matched pads for a service-ready brake replacement on the front axle.
Key Features
- Front disc brake kit with rotors and pads
- DFC GEOSPEC coated rotors with corrosion-resistant silver-gray finish
- Dry-processed rotors arrive ready to install
- Non-directional rotor finish supports even pad bed-in and smoother stopping
- 5000 Advanced Brake Pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- OE-spec cast iron formulation and tight machining tolerances
- Part number 4502-67120 for front brake service
Product Line Details
The DFC GEOSPEC rotor line focuses on corrosion protection and OE-style fitment. The coated surface is designed to resist rust better than conventional paint or zinc finishes, while the dry packaging helps reduce prep time during brake service. The 5000 Advanced Brake Pads are engineered for consistent friction characteristics and quieter operation through their shim design and finishing process.
Detailed Description
This brake kit is built for 1996-1997 Nissan Pathfinder front, 1997 INFINITI QX4 front, and 1998 Nissan Pathfinder front with vehicle build date to 12/98. The rotors are machined to tight tolerances, balanced where required, and inspected for critical dimensions to meet OE specifications. The pads are formulated for stable braking response from the first stop, making this a practical choice for front brake repair on a Nissan Pathfinder or INFINITI QX4. Part number 4502-67120 is a direct reference for this front brake kit application.
What It Helps Address
- Front brake noise during stopping
- Rust buildup on exposed rotor surfaces
- Uneven pad bedding after rotor replacement
- Brake vibration caused by worn front rotors
- Reduced stopping performance from worn pads
Installation Notes and Tips
Use this kit for front axle service only. Confirm vehicle build date on 1998 Nissan Pathfinder models, since this application is limited to vehicles built through 12/98. Clean the hub mounting surface before installation, and follow proper brake bedding procedures after service to help the pads and rotors seat evenly. Verify caliper condition, slide movement, and brake fluid level during the repair.
Quality Assurance
DFC GEOSPEC rotors are 100% inspected after machining, and vented rotors are balance-checked and corrected when needed. Each rotor is covered by a 12-month warranty against defects in material and workmanship. The 5000 Advanced Brake Pads are post-cured and scorched to support stable friction performance and consistent braking characteristics.
