Dynamite Friction 4502-67098 Disc Brake Kit - Rear
Rear Brake Kit for Nissan and INFINITI
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit is a rear disc brake service kit built for select Nissan and INFINITI applications. Part number 4502-67098 combines coated rotors and advanced friction pads in one package for a straightforward brake service on rear axle applications.
Key Features
- Rear disc brake kit with rotors and pads
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Rotors are processed dry and ready to install
- Non-directional rotor finish for more even pad bed-in and smoother braking
- 5000 Advanced Brake Pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- OE-style rotor construction using G3000/G11H18 cast iron specification
- 12-month warranty against defects in material and workmanship on rotors
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are engineered for rear brake service on vehicles such as the Nissan Maxima, Nissan 370Z, Nissan 350Z, and select INFINITI models including G35, G37, M35, M45, EX35, EX37, Q40, QX50, and G25. This part number 4502-67098 is built for drivers replacing worn rear brake components with an OE-style kit that pairs coated rotors with matched pads for consistent braking performance.
The rotor coating helps resist rust better than conventional paint or zinc finishes, while the dry packaging eliminates the need to clean oil from the rotor before installation. The pads are formulated for stable friction, reduced break-in time, and improved NVH control through premium shims. For shoppers searching for a rear brake kit for 2009-2021 Nissan Maxima, rear brake pads and rotors for 2009-2020 Nissan 370Z, or a rear disc brake kit for 2005-2008 INFINITI G35, this kit matches those applications directly. Part number 4502-67098 is also a practical search reference when comparing rear brake service kits for these vehicles.
What This Kit Helps Address
- Rear brake pad wear and reduced stopping performance
- Rotor rust, surface corrosion, and uneven braking feel
- Brake noise, vibration, and harshness from worn components
- Longer pad bed-in time after rotor replacement
- Brake pulsation caused by worn or out-of-spec rear rotors
Installation Notes and Tips
Verify rear axle fitment before ordering, since this kit is listed for rear applications only and some models have brake-package exclusions. Confirm standard brakes, iron calipers, and sport-package notes where shown in the fitment data. The rotors arrive dry and ready to install, which can reduce prep time during a typical rear brake service. Follow proper brake service procedures, clean mating surfaces, and bed in the pads according to the vehicle and friction-material requirements.
Quality Assurance
DFC machines the rotors to tight tolerances, applies a non-directional finish, and inspects critical dimensions to OE specifications. Vented rotors are balance-checked and corrected when needed. The 5000 Advanced Brake Pads are post-cured, scorched, and assembled with premium shims for consistent performance and noise control. Rotors include a 12-month warranty against defects in material and workmanship.
Rear Brake Kit for Nissan and INFINITI
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit is a rear disc brake service kit built for select Nissan and INFINITI applications. Part number 4502-67098 combines coated rotors and advanced friction pads in one package for a straightforward brake service on rear axle applications.
Key Features
- Rear disc brake kit with rotors and pads
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Rotors are processed dry and ready to install
- Non-directional rotor finish for more even pad bed-in and smoother braking
- 5000 Advanced Brake Pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- OE-style rotor construction using G3000/G11H18 cast iron specification
- 12-month warranty against defects in material and workmanship on rotors
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are engineered for rear brake service on vehicles such as the Nissan Maxima, Nissan 370Z, Nissan 350Z, and select INFINITI models including G35, G37, M35, M45, EX35, EX37, Q40, QX50, and G25. This part number 4502-67098 is built for drivers replacing worn rear brake components with an OE-style kit that pairs coated rotors with matched pads for consistent braking performance.
The rotor coating helps resist rust better than conventional paint or zinc finishes, while the dry packaging eliminates the need to clean oil from the rotor before installation. The pads are formulated for stable friction, reduced break-in time, and improved NVH control through premium shims. For shoppers searching for a rear brake kit for 2009-2021 Nissan Maxima, rear brake pads and rotors for 2009-2020 Nissan 370Z, or a rear disc brake kit for 2005-2008 INFINITI G35, this kit matches those applications directly. Part number 4502-67098 is also a practical search reference when comparing rear brake service kits for these vehicles.
What This Kit Helps Address
- Rear brake pad wear and reduced stopping performance
- Rotor rust, surface corrosion, and uneven braking feel
- Brake noise, vibration, and harshness from worn components
- Longer pad bed-in time after rotor replacement
- Brake pulsation caused by worn or out-of-spec rear rotors
Installation Notes and Tips
Verify rear axle fitment before ordering, since this kit is listed for rear applications only and some models have brake-package exclusions. Confirm standard brakes, iron calipers, and sport-package notes where shown in the fitment data. The rotors arrive dry and ready to install, which can reduce prep time during a typical rear brake service. Follow proper brake service procedures, clean mating surfaces, and bed in the pads according to the vehicle and friction-material requirements.
Quality Assurance
DFC machines the rotors to tight tolerances, applies a non-directional finish, and inspects critical dimensions to OE specifications. Vented rotors are balance-checked and corrected when needed. The 5000 Advanced Brake Pads are post-cured, scorched, and assembled with premium shims for consistent performance and noise control. Rotors include a 12-month warranty against defects in material and workmanship.
Original: $153.39
-65%$153.39
$53.69Description
Rear Brake Kit for Nissan and INFINITI
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit is a rear disc brake service kit built for select Nissan and INFINITI applications. Part number 4502-67098 combines coated rotors and advanced friction pads in one package for a straightforward brake service on rear axle applications.
Key Features
- Rear disc brake kit with rotors and pads
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Rotors are processed dry and ready to install
- Non-directional rotor finish for more even pad bed-in and smoother braking
- 5000 Advanced Brake Pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- OE-style rotor construction using G3000/G11H18 cast iron specification
- 12-month warranty against defects in material and workmanship on rotors
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are engineered for rear brake service on vehicles such as the Nissan Maxima, Nissan 370Z, Nissan 350Z, and select INFINITI models including G35, G37, M35, M45, EX35, EX37, Q40, QX50, and G25. This part number 4502-67098 is built for drivers replacing worn rear brake components with an OE-style kit that pairs coated rotors with matched pads for consistent braking performance.
The rotor coating helps resist rust better than conventional paint or zinc finishes, while the dry packaging eliminates the need to clean oil from the rotor before installation. The pads are formulated for stable friction, reduced break-in time, and improved NVH control through premium shims. For shoppers searching for a rear brake kit for 2009-2021 Nissan Maxima, rear brake pads and rotors for 2009-2020 Nissan 370Z, or a rear disc brake kit for 2005-2008 INFINITI G35, this kit matches those applications directly. Part number 4502-67098 is also a practical search reference when comparing rear brake service kits for these vehicles.
What This Kit Helps Address
- Rear brake pad wear and reduced stopping performance
- Rotor rust, surface corrosion, and uneven braking feel
- Brake noise, vibration, and harshness from worn components
- Longer pad bed-in time after rotor replacement
- Brake pulsation caused by worn or out-of-spec rear rotors
Installation Notes and Tips
Verify rear axle fitment before ordering, since this kit is listed for rear applications only and some models have brake-package exclusions. Confirm standard brakes, iron calipers, and sport-package notes where shown in the fitment data. The rotors arrive dry and ready to install, which can reduce prep time during a typical rear brake service. Follow proper brake service procedures, clean mating surfaces, and bed in the pads according to the vehicle and friction-material requirements.
Quality Assurance
DFC machines the rotors to tight tolerances, applies a non-directional finish, and inspects critical dimensions to OE specifications. Vented rotors are balance-checked and corrected when needed. The 5000 Advanced Brake Pads are post-cured, scorched, and assembled with premium shims for consistent performance and noise control. Rotors include a 12-month warranty against defects in material and workmanship.
