Dynamite Friction 4502-67091 Disc Brake Kit - Front
Front Brake Kit for Nissan Maxima and Murano
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit combines coated front rotors and matched pads in one service package. It is built for drivers servicing a 2004-2005 Nissan Maxima front brake job or a 2003-2004 Nissan Murano front brake replacement with OE-style fitment and corrosion protection.
- Disc brake kit with front rotors and pads
- DFC GEOSPEC coated rotors with silver-gray corrosion-resistant finish
- Dry-processed rotors ready to install without oil cleanup
- G3000/G11H18 cast iron rotor construction
- Non-directional rotor finish for more even pad bed-in and quieter stops
- DFC 5000 Advanced pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Part number 4502-67091
Product Line Details
DFC Complete Brake Kits are packaged to simplify brake service by pairing the correct rotors and pads for the axle being serviced. The GEOSPEC rotor line adds a protective coating to help resist rust, while the 5000 Advanced pad line focuses on stable friction performance and consistent pedal feel across everyday driving conditions.
Detailed Description
This front brake kit is engineered for direct replacement service on the front axle of the 2004-2005 Nissan Maxima and the 2003-2004 Nissan Murano, including 2004 Nissan Murano vehicles built up to 4/04. The coated rotors arrive dry and ready for installation, which helps reduce prep time during a front brake service. The pads are formulated for stable friction output and are assembled with premium shims to help control brake noise and vibration. Part number 4502-67091 is a practical choice for a Nissan Maxima front brake kit or Nissan Murano front brake kit when you want matched components in one box.
Common Problems This Kit Can Address
- Front brake rotor rust and surface corrosion
- Brake pulsation from worn or uneven rotors
- Reduced stopping performance from worn pads
- Brake noise, squeal, or vibration during stops
- Longer service time caused by rotor prep and cleanup
Installation Notes and Tips
Compatible With front axle service only. Verify vehicle production date on 2004 Nissan Murano models, since coverage applies to vehicles built to 4/04. Clean the hub mounting surface before installation, inspect calipers and slide hardware, and follow proper pad bed-in procedures after installation. The rotors are supplied dry and do not require oil removal before use.
Quality Assurance
Each DFC GEOSPEC rotor is machined to tight tolerances, finished with a non-directional surface, and fully inspected for critical dimensions and balance. The rotors are covered by a 12-month warranty against defects in material and workmanship. Part number 4502-67091 is built to OE-style specifications for durability, reliability, and stable braking performance.
Front Brake Kit for Nissan Maxima and Murano
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit combines coated front rotors and matched pads in one service package. It is built for drivers servicing a 2004-2005 Nissan Maxima front brake job or a 2003-2004 Nissan Murano front brake replacement with OE-style fitment and corrosion protection.
- Disc brake kit with front rotors and pads
- DFC GEOSPEC coated rotors with silver-gray corrosion-resistant finish
- Dry-processed rotors ready to install without oil cleanup
- G3000/G11H18 cast iron rotor construction
- Non-directional rotor finish for more even pad bed-in and quieter stops
- DFC 5000 Advanced pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Part number 4502-67091
Product Line Details
DFC Complete Brake Kits are packaged to simplify brake service by pairing the correct rotors and pads for the axle being serviced. The GEOSPEC rotor line adds a protective coating to help resist rust, while the 5000 Advanced pad line focuses on stable friction performance and consistent pedal feel across everyday driving conditions.
Detailed Description
This front brake kit is engineered for direct replacement service on the front axle of the 2004-2005 Nissan Maxima and the 2003-2004 Nissan Murano, including 2004 Nissan Murano vehicles built up to 4/04. The coated rotors arrive dry and ready for installation, which helps reduce prep time during a front brake service. The pads are formulated for stable friction output and are assembled with premium shims to help control brake noise and vibration. Part number 4502-67091 is a practical choice for a Nissan Maxima front brake kit or Nissan Murano front brake kit when you want matched components in one box.
Common Problems This Kit Can Address
- Front brake rotor rust and surface corrosion
- Brake pulsation from worn or uneven rotors
- Reduced stopping performance from worn pads
- Brake noise, squeal, or vibration during stops
- Longer service time caused by rotor prep and cleanup
Installation Notes and Tips
Compatible With front axle service only. Verify vehicle production date on 2004 Nissan Murano models, since coverage applies to vehicles built to 4/04. Clean the hub mounting surface before installation, inspect calipers and slide hardware, and follow proper pad bed-in procedures after installation. The rotors are supplied dry and do not require oil removal before use.
Quality Assurance
Each DFC GEOSPEC rotor is machined to tight tolerances, finished with a non-directional surface, and fully inspected for critical dimensions and balance. The rotors are covered by a 12-month warranty against defects in material and workmanship. Part number 4502-67091 is built to OE-style specifications for durability, reliability, and stable braking performance.
Original: $218.54
-65%$218.54
$76.49Description
Front Brake Kit for Nissan Maxima and Murano
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit combines coated front rotors and matched pads in one service package. It is built for drivers servicing a 2004-2005 Nissan Maxima front brake job or a 2003-2004 Nissan Murano front brake replacement with OE-style fitment and corrosion protection.
- Disc brake kit with front rotors and pads
- DFC GEOSPEC coated rotors with silver-gray corrosion-resistant finish
- Dry-processed rotors ready to install without oil cleanup
- G3000/G11H18 cast iron rotor construction
- Non-directional rotor finish for more even pad bed-in and quieter stops
- DFC 5000 Advanced pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Part number 4502-67091
Product Line Details
DFC Complete Brake Kits are packaged to simplify brake service by pairing the correct rotors and pads for the axle being serviced. The GEOSPEC rotor line adds a protective coating to help resist rust, while the 5000 Advanced pad line focuses on stable friction performance and consistent pedal feel across everyday driving conditions.
Detailed Description
This front brake kit is engineered for direct replacement service on the front axle of the 2004-2005 Nissan Maxima and the 2003-2004 Nissan Murano, including 2004 Nissan Murano vehicles built up to 4/04. The coated rotors arrive dry and ready for installation, which helps reduce prep time during a front brake service. The pads are formulated for stable friction output and are assembled with premium shims to help control brake noise and vibration. Part number 4502-67091 is a practical choice for a Nissan Maxima front brake kit or Nissan Murano front brake kit when you want matched components in one box.
Common Problems This Kit Can Address
- Front brake rotor rust and surface corrosion
- Brake pulsation from worn or uneven rotors
- Reduced stopping performance from worn pads
- Brake noise, squeal, or vibration during stops
- Longer service time caused by rotor prep and cleanup
Installation Notes and Tips
Compatible With front axle service only. Verify vehicle production date on 2004 Nissan Murano models, since coverage applies to vehicles built to 4/04. Clean the hub mounting surface before installation, inspect calipers and slide hardware, and follow proper pad bed-in procedures after installation. The rotors are supplied dry and do not require oil removal before use.
Quality Assurance
Each DFC GEOSPEC rotor is machined to tight tolerances, finished with a non-directional surface, and fully inspected for critical dimensions and balance. The rotors are covered by a 12-month warranty against defects in material and workmanship. Part number 4502-67091 is built to OE-style specifications for durability, reliability, and stable braking performance.
