Dynamite Friction 4502-65036 Disc Brake Kit - Front
Brake Kit for Saab 9-3 and Cadillac BLS
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit combines coated rotors and matched pads in one front brake service package. Part number 4502-65036 is built for specific Saab 9-3 and Cadillac BLS front applications, including models with the 302mm rotor setup.
Key Features
- Complete front disc brake kit with rotors and pads
- DFC GEOSPEC coated rotors with silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install
- G3000/G11H18 cast iron rotor construction for OE-style durability
- Non-directional rotor finish for more even pad bed-in and quieter stops
- DFC 5000 Advanced pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- 12-month warranty against defects in material and workmanship on rotors
Product Details
DFC Complete Brake Kits are packaged to simplify front brake service by pairing the correct rotors and pads for the application. The GEOSPEC rotor coating is designed to resist rust better than conventional paint or zinc finishes, while the pad compound is prepared to reduce initial break-in time and deliver consistent stopping response from the first stop. This part number, 4502-65036, is listed for 2003-2005 Saab 9-3 front, 2006-2009 Saab 9-3 front with 302mm front rotors, 2010-2011 Saab 9-3 front with Performance Package and 302mm front and 292mm rear rotors, and 2007-2008 Cadillac BLS front with 302mm front disc brakes.
Common Brake Issues This Kit Addresses
- Front brake rotor rust and surface corrosion
- Brake noise, squeal, or vibration during stops
- Uneven pad bedding after rotor replacement
- Reduced stopping consistency from worn pads and rotors
- Time lost sourcing separate rotor and pad components
Installation Notes
Verify rotor diameter and vehicle configuration before ordering, especially on Saab 9-3 Performance Package applications and Cadillac BLS models with 302mm front discs. The rotors are shipped dry and do not require oil removal before installation. A proper bed-in procedure should be followed after service to help the pads and rotors seat evenly. This kit is for front axle use only.
Quality Assurance
DFC GEOSPEC rotors are machined to tight tolerances, finished with a non-directional surface, and inspected for critical dimensions and balance before release. The rotors are covered by a 12-month warranty against defects in material and workmanship. Part number 4502-65036 is engineered as an OE-style brake service solution for Saab 9-3 and Cadillac BLS front brake maintenance.
Brake Kit for Saab 9-3 and Cadillac BLS
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit combines coated rotors and matched pads in one front brake service package. Part number 4502-65036 is built for specific Saab 9-3 and Cadillac BLS front applications, including models with the 302mm rotor setup.
Key Features
- Complete front disc brake kit with rotors and pads
- DFC GEOSPEC coated rotors with silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install
- G3000/G11H18 cast iron rotor construction for OE-style durability
- Non-directional rotor finish for more even pad bed-in and quieter stops
- DFC 5000 Advanced pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- 12-month warranty against defects in material and workmanship on rotors
Product Details
DFC Complete Brake Kits are packaged to simplify front brake service by pairing the correct rotors and pads for the application. The GEOSPEC rotor coating is designed to resist rust better than conventional paint or zinc finishes, while the pad compound is prepared to reduce initial break-in time and deliver consistent stopping response from the first stop. This part number, 4502-65036, is listed for 2003-2005 Saab 9-3 front, 2006-2009 Saab 9-3 front with 302mm front rotors, 2010-2011 Saab 9-3 front with Performance Package and 302mm front and 292mm rear rotors, and 2007-2008 Cadillac BLS front with 302mm front disc brakes.
Common Brake Issues This Kit Addresses
- Front brake rotor rust and surface corrosion
- Brake noise, squeal, or vibration during stops
- Uneven pad bedding after rotor replacement
- Reduced stopping consistency from worn pads and rotors
- Time lost sourcing separate rotor and pad components
Installation Notes
Verify rotor diameter and vehicle configuration before ordering, especially on Saab 9-3 Performance Package applications and Cadillac BLS models with 302mm front discs. The rotors are shipped dry and do not require oil removal before installation. A proper bed-in procedure should be followed after service to help the pads and rotors seat evenly. This kit is for front axle use only.
Quality Assurance
DFC GEOSPEC rotors are machined to tight tolerances, finished with a non-directional surface, and inspected for critical dimensions and balance before release. The rotors are covered by a 12-month warranty against defects in material and workmanship. Part number 4502-65036 is engineered as an OE-style brake service solution for Saab 9-3 and Cadillac BLS front brake maintenance.
Description
Brake Kit for Saab 9-3 and Cadillac BLS
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit combines coated rotors and matched pads in one front brake service package. Part number 4502-65036 is built for specific Saab 9-3 and Cadillac BLS front applications, including models with the 302mm rotor setup.
Key Features
- Complete front disc brake kit with rotors and pads
- DFC GEOSPEC coated rotors with silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install
- G3000/G11H18 cast iron rotor construction for OE-style durability
- Non-directional rotor finish for more even pad bed-in and quieter stops
- DFC 5000 Advanced pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- 12-month warranty against defects in material and workmanship on rotors
Product Details
DFC Complete Brake Kits are packaged to simplify front brake service by pairing the correct rotors and pads for the application. The GEOSPEC rotor coating is designed to resist rust better than conventional paint or zinc finishes, while the pad compound is prepared to reduce initial break-in time and deliver consistent stopping response from the first stop. This part number, 4502-65036, is listed for 2003-2005 Saab 9-3 front, 2006-2009 Saab 9-3 front with 302mm front rotors, 2010-2011 Saab 9-3 front with Performance Package and 302mm front and 292mm rear rotors, and 2007-2008 Cadillac BLS front with 302mm front disc brakes.
Common Brake Issues This Kit Addresses
- Front brake rotor rust and surface corrosion
- Brake noise, squeal, or vibration during stops
- Uneven pad bedding after rotor replacement
- Reduced stopping consistency from worn pads and rotors
- Time lost sourcing separate rotor and pad components
Installation Notes
Verify rotor diameter and vehicle configuration before ordering, especially on Saab 9-3 Performance Package applications and Cadillac BLS models with 302mm front discs. The rotors are shipped dry and do not require oil removal before installation. A proper bed-in procedure should be followed after service to help the pads and rotors seat evenly. This kit is for front axle use only.
Quality Assurance
DFC GEOSPEC rotors are machined to tight tolerances, finished with a non-directional surface, and inspected for critical dimensions and balance before release. The rotors are covered by a 12-month warranty against defects in material and workmanship. Part number 4502-65036 is engineered as an OE-style brake service solution for Saab 9-3 and Cadillac BLS front brake maintenance.
