Dynamite Friction 4502-63229 Disc Brake Kit - Rear
Rear Brake Kit for Mercedes-Benz AMG Applications
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit is a rear disc brake service kit built for select Mercedes-Benz AMG and sport-package applications. Part number 4502-63229 combines coated rear rotors with matched brake pads for a direct-service replacement focused on OE-style fit, stable braking, and cleaner rotor protection.
Key Features
- Rear disc brake kit with rotors and pads in one package
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed, dry-shipped rotors ready for installation
- G3000/G11H18 cast iron rotor construction for OE-spec durability and stability
- Non-directional rotor finish for more even pad bed-in and smoother stops
- DFC 5000 Advanced pads are post-cured and scorched for consistent friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- 12-month warranty against defects in material and workmanship
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are engineered for drivers who need a complete rear brake service solution for Mercedes-Benz C43 AMG, GLC43 AMG, C450 AMG, and select GLC250 sport-package applications. The coated rotors are designed to resist rust better than conventional painted or zinc-coated rotors, while the machined finish supports quicker pad bedding and quieter operation. The 5000 Advanced pad compound is formulated for stable friction and consistent pedal response across everyday driving conditions.
This part number, 4502-63229, is a practical choice when replacing worn rear brake components on 2021-2022 Mercedes-Benz C43 AMG, 2017-2021 Mercedes-Benz GLC43 AMG, 2017-2020 Mercedes-Benz C43 AMG, 2017-2018 Mercedes-Benz GLC250 with Sport Package for South America, and 2016 Mercedes-Benz C450 AMG. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What This Brake Kit Helps Address
- Rear brake noise during light or moderate braking
- Rotor surface rust and corrosion buildup
- Uneven pad bedding after brake service
- Reduced stopping consistency from worn pads and rotors
- Brake vibration caused by aged or out-of-spec rear components
Installation Notes and Tips
Compatible With rear axle service only. The rotors are shipped dry and ready to install, which helps reduce prep time during brake work. For best results, inspect caliper condition, guide hardware, and brake fluid condition before completing the service. Follow the vehicle manufacturer’s bedding procedure after installation to help the pads and rotors seat properly. Verify exact vehicle trim and rear brake configuration before ordering, especially on AMG and sport-package models.
Quality Assurance
Each rotor is machined to tight tolerances, inspected for critical dimensions, and checked for balance on vented designs. DFC states that every rotor meets OE specifications, and the kit includes a 12-month warranty against defects in material and workmanship. Part number 4502-63229 is built to support dependable rear brake service on the listed Mercedes-Benz applications.
Rear Brake Kit for Mercedes-Benz AMG Applications
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit is a rear disc brake service kit built for select Mercedes-Benz AMG and sport-package applications. Part number 4502-63229 combines coated rear rotors with matched brake pads for a direct-service replacement focused on OE-style fit, stable braking, and cleaner rotor protection.
Key Features
- Rear disc brake kit with rotors and pads in one package
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed, dry-shipped rotors ready for installation
- G3000/G11H18 cast iron rotor construction for OE-spec durability and stability
- Non-directional rotor finish for more even pad bed-in and smoother stops
- DFC 5000 Advanced pads are post-cured and scorched for consistent friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- 12-month warranty against defects in material and workmanship
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are engineered for drivers who need a complete rear brake service solution for Mercedes-Benz C43 AMG, GLC43 AMG, C450 AMG, and select GLC250 sport-package applications. The coated rotors are designed to resist rust better than conventional painted or zinc-coated rotors, while the machined finish supports quicker pad bedding and quieter operation. The 5000 Advanced pad compound is formulated for stable friction and consistent pedal response across everyday driving conditions.
This part number, 4502-63229, is a practical choice when replacing worn rear brake components on 2021-2022 Mercedes-Benz C43 AMG, 2017-2021 Mercedes-Benz GLC43 AMG, 2017-2020 Mercedes-Benz C43 AMG, 2017-2018 Mercedes-Benz GLC250 with Sport Package for South America, and 2016 Mercedes-Benz C450 AMG. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What This Brake Kit Helps Address
- Rear brake noise during light or moderate braking
- Rotor surface rust and corrosion buildup
- Uneven pad bedding after brake service
- Reduced stopping consistency from worn pads and rotors
- Brake vibration caused by aged or out-of-spec rear components
Installation Notes and Tips
Compatible With rear axle service only. The rotors are shipped dry and ready to install, which helps reduce prep time during brake work. For best results, inspect caliper condition, guide hardware, and brake fluid condition before completing the service. Follow the vehicle manufacturer’s bedding procedure after installation to help the pads and rotors seat properly. Verify exact vehicle trim and rear brake configuration before ordering, especially on AMG and sport-package models.
Quality Assurance
Each rotor is machined to tight tolerances, inspected for critical dimensions, and checked for balance on vented designs. DFC states that every rotor meets OE specifications, and the kit includes a 12-month warranty against defects in material and workmanship. Part number 4502-63229 is built to support dependable rear brake service on the listed Mercedes-Benz applications.
Description
Rear Brake Kit for Mercedes-Benz AMG Applications
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit is a rear disc brake service kit built for select Mercedes-Benz AMG and sport-package applications. Part number 4502-63229 combines coated rear rotors with matched brake pads for a direct-service replacement focused on OE-style fit, stable braking, and cleaner rotor protection.
Key Features
- Rear disc brake kit with rotors and pads in one package
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed, dry-shipped rotors ready for installation
- G3000/G11H18 cast iron rotor construction for OE-spec durability and stability
- Non-directional rotor finish for more even pad bed-in and smoother stops
- DFC 5000 Advanced pads are post-cured and scorched for consistent friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- 12-month warranty against defects in material and workmanship
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are engineered for drivers who need a complete rear brake service solution for Mercedes-Benz C43 AMG, GLC43 AMG, C450 AMG, and select GLC250 sport-package applications. The coated rotors are designed to resist rust better than conventional painted or zinc-coated rotors, while the machined finish supports quicker pad bedding and quieter operation. The 5000 Advanced pad compound is formulated for stable friction and consistent pedal response across everyday driving conditions.
This part number, 4502-63229, is a practical choice when replacing worn rear brake components on 2021-2022 Mercedes-Benz C43 AMG, 2017-2021 Mercedes-Benz GLC43 AMG, 2017-2020 Mercedes-Benz C43 AMG, 2017-2018 Mercedes-Benz GLC250 with Sport Package for South America, and 2016 Mercedes-Benz C450 AMG. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What This Brake Kit Helps Address
- Rear brake noise during light or moderate braking
- Rotor surface rust and corrosion buildup
- Uneven pad bedding after brake service
- Reduced stopping consistency from worn pads and rotors
- Brake vibration caused by aged or out-of-spec rear components
Installation Notes and Tips
Compatible With rear axle service only. The rotors are shipped dry and ready to install, which helps reduce prep time during brake work. For best results, inspect caliper condition, guide hardware, and brake fluid condition before completing the service. Follow the vehicle manufacturer’s bedding procedure after installation to help the pads and rotors seat properly. Verify exact vehicle trim and rear brake configuration before ordering, especially on AMG and sport-package models.
Quality Assurance
Each rotor is machined to tight tolerances, inspected for critical dimensions, and checked for balance on vented designs. DFC states that every rotor meets OE specifications, and the kit includes a 12-month warranty against defects in material and workmanship. Part number 4502-63229 is built to support dependable rear brake service on the listed Mercedes-Benz applications.
