Dynamite Friction 4502-63156 Disc Brake Kit - Rear
Rear Brake Kit for Mercedes-Benz SL600 and SL55 AMG
Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads, part number 4502-63156, is a rear disc brake kit built for select Mercedes-Benz applications. It combines coated rotors and advanced friction pads for a service-ready brake replacement on the rear axle.
Key Features
- Rear disc brake kit with rotors and pads in one package
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed, dry-shipped rotors ready for installation without prep cleaning
- G3000/G11H18 cast iron rotor construction for OE-style durability and stability
- Non-directional rotor finish for more even pad bed-in and smoother braking
- 5000 Advanced Brake Pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Part number 4502-63156 for rear brake service on select Mercedes-Benz models
Product Details
The DFC GEOSPEC rotor line is engineered to match OEM specifications and is machined to tight tolerances for consistent fit and braking performance. Each vented rotor is inspected for balance, and every rotor passes a final inspection for critical dimensions before release. The 5000 Advanced Brake Pads are formulated for controlled friction and are prepared to reduce initial break-in time while supporting quiet operation. This makes 4502-63156 a practical rear brake kit for Mercedes-Benz SL600 and Mercedes-Benz SL55 AMG rear brake service.
Compatible With: Fits 2004-2009 Mercedes-Benz SL600, rear; Fits 2003-2006 Mercedes-Benz SL55 AMG, rear; Fits 2007-2008 Mercedes-Benz SL55 AMG, rear with 8-piston front calipers. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues This Kit Can Address
- Rear brake pulsation from worn or uneven rotors
- Brake noise caused by aged pads or rotor surface wear
- Reduced stopping consistency from heat-cycled friction material
- Rust buildup on exposed rotor surfaces
- Extended service time when replacing pads and rotors separately
Installation Notes and Tips
Rear brake service on these Mercedes-Benz models should follow OE service procedures, including proper cleaning of hub surfaces and verification of caliper condition before assembly. The rotors are shipped dry and ready to install, which helps reduce prep time during the brake job. Confirm rear axle fitment and, for 2007-2008 SL55 AMG applications, verify the 8-piston front caliper note before ordering.
Quality Assurance
Each DFC GEOSPEC rotor is inspected for balance and critical dimensions, and the finished rotor is checked against OE specifications. The rotors include a 12-month warranty against defects in material and workmanship.
Rear Brake Kit for Mercedes-Benz SL600 and SL55 AMG
Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads, part number 4502-63156, is a rear disc brake kit built for select Mercedes-Benz applications. It combines coated rotors and advanced friction pads for a service-ready brake replacement on the rear axle.
Key Features
- Rear disc brake kit with rotors and pads in one package
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed, dry-shipped rotors ready for installation without prep cleaning
- G3000/G11H18 cast iron rotor construction for OE-style durability and stability
- Non-directional rotor finish for more even pad bed-in and smoother braking
- 5000 Advanced Brake Pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Part number 4502-63156 for rear brake service on select Mercedes-Benz models
Product Details
The DFC GEOSPEC rotor line is engineered to match OEM specifications and is machined to tight tolerances for consistent fit and braking performance. Each vented rotor is inspected for balance, and every rotor passes a final inspection for critical dimensions before release. The 5000 Advanced Brake Pads are formulated for controlled friction and are prepared to reduce initial break-in time while supporting quiet operation. This makes 4502-63156 a practical rear brake kit for Mercedes-Benz SL600 and Mercedes-Benz SL55 AMG rear brake service.
Compatible With: Fits 2004-2009 Mercedes-Benz SL600, rear; Fits 2003-2006 Mercedes-Benz SL55 AMG, rear; Fits 2007-2008 Mercedes-Benz SL55 AMG, rear with 8-piston front calipers. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues This Kit Can Address
- Rear brake pulsation from worn or uneven rotors
- Brake noise caused by aged pads or rotor surface wear
- Reduced stopping consistency from heat-cycled friction material
- Rust buildup on exposed rotor surfaces
- Extended service time when replacing pads and rotors separately
Installation Notes and Tips
Rear brake service on these Mercedes-Benz models should follow OE service procedures, including proper cleaning of hub surfaces and verification of caliper condition before assembly. The rotors are shipped dry and ready to install, which helps reduce prep time during the brake job. Confirm rear axle fitment and, for 2007-2008 SL55 AMG applications, verify the 8-piston front caliper note before ordering.
Quality Assurance
Each DFC GEOSPEC rotor is inspected for balance and critical dimensions, and the finished rotor is checked against OE specifications. The rotors include a 12-month warranty against defects in material and workmanship.
Description
Rear Brake Kit for Mercedes-Benz SL600 and SL55 AMG
Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads, part number 4502-63156, is a rear disc brake kit built for select Mercedes-Benz applications. It combines coated rotors and advanced friction pads for a service-ready brake replacement on the rear axle.
Key Features
- Rear disc brake kit with rotors and pads in one package
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed, dry-shipped rotors ready for installation without prep cleaning
- G3000/G11H18 cast iron rotor construction for OE-style durability and stability
- Non-directional rotor finish for more even pad bed-in and smoother braking
- 5000 Advanced Brake Pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Part number 4502-63156 for rear brake service on select Mercedes-Benz models
Product Details
The DFC GEOSPEC rotor line is engineered to match OEM specifications and is machined to tight tolerances for consistent fit and braking performance. Each vented rotor is inspected for balance, and every rotor passes a final inspection for critical dimensions before release. The 5000 Advanced Brake Pads are formulated for controlled friction and are prepared to reduce initial break-in time while supporting quiet operation. This makes 4502-63156 a practical rear brake kit for Mercedes-Benz SL600 and Mercedes-Benz SL55 AMG rear brake service.
Compatible With: Fits 2004-2009 Mercedes-Benz SL600, rear; Fits 2003-2006 Mercedes-Benz SL55 AMG, rear; Fits 2007-2008 Mercedes-Benz SL55 AMG, rear with 8-piston front calipers. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues This Kit Can Address
- Rear brake pulsation from worn or uneven rotors
- Brake noise caused by aged pads or rotor surface wear
- Reduced stopping consistency from heat-cycled friction material
- Rust buildup on exposed rotor surfaces
- Extended service time when replacing pads and rotors separately
Installation Notes and Tips
Rear brake service on these Mercedes-Benz models should follow OE service procedures, including proper cleaning of hub surfaces and verification of caliper condition before assembly. The rotors are shipped dry and ready to install, which helps reduce prep time during the brake job. Confirm rear axle fitment and, for 2007-2008 SL55 AMG applications, verify the 8-piston front caliper note before ordering.
Quality Assurance
Each DFC GEOSPEC rotor is inspected for balance and critical dimensions, and the finished rotor is checked against OE specifications. The rotors include a 12-month warranty against defects in material and workmanship.
