Dynamite Friction 4502-63124 Disc Brake Kit - Front
Front Brake Kit for Mercedes-Benz S-Class and CL-Class
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit is a front disc brake service solution for select Mercedes-Benz models from 1991-1999. Part number 4502-63124 combines coated rotors and matched pads to support consistent braking performance, reduced rust buildup, and smoother pad bedding.
Compatible With Mercedes-Benz CL500, CL600, S320, S420, S500, S600, S350, 300SD, 300SE, 400SEL, 500SEC, 500SEL, 600SEC, 600SEL, and 400SE front brake applications. This kit is also listed for 1991 Mercedes-Benz 300SE front vehicles with production from 4/91 and Girling front calipers.
Key Features
- Complete front brake kit with rotors and pads
- DFC GeoSpec coated rotors with silver-gray corrosion-resistant finish
- Rotors ship dry and ready to install
- Non-directional rotor finish for more even pad bed-in and quieter stops
- 5000 Advanced pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- OE-matched cast iron rotor specification and tight machining tolerances
- Vented rotors are balance-inspected and corrected when needed
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are built as a matched front brake kit for Mercedes-Benz S-Class and CL-Class vehicles. The rotors use a coated finish to resist rust better than conventional paint or zinc-style coatings, while the pad compound is formulated for stable friction and reduced break-in time. Part number 4502-63124 is a practical choice for drivers servicing front brakes on 1990s Mercedes-Benz sedans and coupes that require OE-style fit and finish.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Problems This Kit Can Address
- Front brake pulsation from worn or uneven rotors
- Brake noise caused by aged pads or rotor surface wear
- Rust buildup on exposed rotor surfaces
- Longer stopping distances from depleted friction material
- Uneven pad bedding after brake service
Installation Notes
Use this kit for front brake service only. Confirm caliper type and vehicle production details before ordering, especially for 1991 Mercedes-Benz 300SE and 1992-1993 Mercedes-Benz 300SD/300SE/S350 applications that require Girling front calipers. The rotors are shipped dry, so no cleaning of oil-coated surfaces is needed before installation. Follow proper brake service procedures and bed the pads according to standard brake-in practice after installation.
Quality Assurance
DFC manufactures the rotors to OE specifications using G3000/G11H18 cast iron, then inspects critical dimensions and balance before release. The 5000 Advanced pads are post-cured, scorched, and assembled with premium shims for consistent performance and improved NVH control. Rotors include a 12-month warranty against defects in material and workmanship.
Front Brake Kit for Mercedes-Benz S-Class and CL-Class
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit is a front disc brake service solution for select Mercedes-Benz models from 1991-1999. Part number 4502-63124 combines coated rotors and matched pads to support consistent braking performance, reduced rust buildup, and smoother pad bedding.
Compatible With Mercedes-Benz CL500, CL600, S320, S420, S500, S600, S350, 300SD, 300SE, 400SEL, 500SEC, 500SEL, 600SEC, 600SEL, and 400SE front brake applications. This kit is also listed for 1991 Mercedes-Benz 300SE front vehicles with production from 4/91 and Girling front calipers.
Key Features
- Complete front brake kit with rotors and pads
- DFC GeoSpec coated rotors with silver-gray corrosion-resistant finish
- Rotors ship dry and ready to install
- Non-directional rotor finish for more even pad bed-in and quieter stops
- 5000 Advanced pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- OE-matched cast iron rotor specification and tight machining tolerances
- Vented rotors are balance-inspected and corrected when needed
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are built as a matched front brake kit for Mercedes-Benz S-Class and CL-Class vehicles. The rotors use a coated finish to resist rust better than conventional paint or zinc-style coatings, while the pad compound is formulated for stable friction and reduced break-in time. Part number 4502-63124 is a practical choice for drivers servicing front brakes on 1990s Mercedes-Benz sedans and coupes that require OE-style fit and finish.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Problems This Kit Can Address
- Front brake pulsation from worn or uneven rotors
- Brake noise caused by aged pads or rotor surface wear
- Rust buildup on exposed rotor surfaces
- Longer stopping distances from depleted friction material
- Uneven pad bedding after brake service
Installation Notes
Use this kit for front brake service only. Confirm caliper type and vehicle production details before ordering, especially for 1991 Mercedes-Benz 300SE and 1992-1993 Mercedes-Benz 300SD/300SE/S350 applications that require Girling front calipers. The rotors are shipped dry, so no cleaning of oil-coated surfaces is needed before installation. Follow proper brake service procedures and bed the pads according to standard brake-in practice after installation.
Quality Assurance
DFC manufactures the rotors to OE specifications using G3000/G11H18 cast iron, then inspects critical dimensions and balance before release. The 5000 Advanced pads are post-cured, scorched, and assembled with premium shims for consistent performance and improved NVH control. Rotors include a 12-month warranty against defects in material and workmanship.
Description
Front Brake Kit for Mercedes-Benz S-Class and CL-Class
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit is a front disc brake service solution for select Mercedes-Benz models from 1991-1999. Part number 4502-63124 combines coated rotors and matched pads to support consistent braking performance, reduced rust buildup, and smoother pad bedding.
Compatible With Mercedes-Benz CL500, CL600, S320, S420, S500, S600, S350, 300SD, 300SE, 400SEL, 500SEC, 500SEL, 600SEC, 600SEL, and 400SE front brake applications. This kit is also listed for 1991 Mercedes-Benz 300SE front vehicles with production from 4/91 and Girling front calipers.
Key Features
- Complete front brake kit with rotors and pads
- DFC GeoSpec coated rotors with silver-gray corrosion-resistant finish
- Rotors ship dry and ready to install
- Non-directional rotor finish for more even pad bed-in and quieter stops
- 5000 Advanced pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- OE-matched cast iron rotor specification and tight machining tolerances
- Vented rotors are balance-inspected and corrected when needed
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are built as a matched front brake kit for Mercedes-Benz S-Class and CL-Class vehicles. The rotors use a coated finish to resist rust better than conventional paint or zinc-style coatings, while the pad compound is formulated for stable friction and reduced break-in time. Part number 4502-63124 is a practical choice for drivers servicing front brakes on 1990s Mercedes-Benz sedans and coupes that require OE-style fit and finish.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Problems This Kit Can Address
- Front brake pulsation from worn or uneven rotors
- Brake noise caused by aged pads or rotor surface wear
- Rust buildup on exposed rotor surfaces
- Longer stopping distances from depleted friction material
- Uneven pad bedding after brake service
Installation Notes
Use this kit for front brake service only. Confirm caliper type and vehicle production details before ordering, especially for 1991 Mercedes-Benz 300SE and 1992-1993 Mercedes-Benz 300SD/300SE/S350 applications that require Girling front calipers. The rotors are shipped dry, so no cleaning of oil-coated surfaces is needed before installation. Follow proper brake service procedures and bed the pads according to standard brake-in practice after installation.
Quality Assurance
DFC manufactures the rotors to OE specifications using G3000/G11H18 cast iron, then inspects critical dimensions and balance before release. The 5000 Advanced pads are post-cured, scorched, and assembled with premium shims for consistent performance and improved NVH control. Rotors include a 12-month warranty against defects in material and workmanship.
