Dynamite Friction 4502-59185 Disc Brake Kit - Front
Front Brake Kit for Acura, Honda
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit combines coated front rotors and matched brake pads in one service package. It is built for drivers servicing a front brake job on select Acura ILX, Honda Civic, and Honda Accord applications.
- Front disc brake kit with rotors and pads
- DFC GEOSPEC coated rotors with silver-gray corrosion-resistant finish
- Dry-to-install rotor coating helps reduce prep time
- Non-directional rotor finish supports even pad bed-in and quieter stops
- DFC 5000 Advanced pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Part number 4502-59185
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads, part number 4502-59185, is a front brake service kit engineered for OE-style replacement on the listed vehicles. The rotors use G3000/G11H18 cast iron and are machined to tight tolerances, then finished with a non-directional surface to promote consistent pad contact. The coated rotor surface is designed to resist rust better than conventional paint or zinc finishes, while the dry packaging means the parts are ready for installation without cleaning off oil. The pad set is formulated for stable friction and improved initial bite after break-in.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Vehicle Fitment
- Fits 2022 Acura ILX, front
- Fits 2017-2021 Acura ILX, front
- Fits 2017-2020 Honda Civic, front
- Fits 2016-2017 Honda Accord, front
Common Brake Service Issues
- Front brake noise during stopping
- Rust buildup on exposed rotor surfaces
- Uneven pad wear or inconsistent pedal feel
- Longer stopping distances from worn rotors and pads
- Brake vibration caused by rotor surface irregularities
Installation Notes
Use this kit for front axle brake service only. Verify rotor size, caliper clearance, and vehicle trim before installation on a 2022 Acura ILX, 2017-2021 Acura ILX, 2017-2020 Honda Civic, or 2016-2017 Honda Accord. Clean the rotor friction surface before assembly if needed, and follow standard brake bedding procedures after installation to help establish even pad transfer.
Quality Assurance
Each DFC GEOSPEC rotor is 100% inspected after machining, including balance checks on vented rotors. The rotors are covered by a 12-month warranty against defects in material and workmanship. Part number 4502-59185 is built to OE specifications for durability, reliability, and stability.
Front Brake Kit for Acura, Honda
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit combines coated front rotors and matched brake pads in one service package. It is built for drivers servicing a front brake job on select Acura ILX, Honda Civic, and Honda Accord applications.
- Front disc brake kit with rotors and pads
- DFC GEOSPEC coated rotors with silver-gray corrosion-resistant finish
- Dry-to-install rotor coating helps reduce prep time
- Non-directional rotor finish supports even pad bed-in and quieter stops
- DFC 5000 Advanced pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Part number 4502-59185
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads, part number 4502-59185, is a front brake service kit engineered for OE-style replacement on the listed vehicles. The rotors use G3000/G11H18 cast iron and are machined to tight tolerances, then finished with a non-directional surface to promote consistent pad contact. The coated rotor surface is designed to resist rust better than conventional paint or zinc finishes, while the dry packaging means the parts are ready for installation without cleaning off oil. The pad set is formulated for stable friction and improved initial bite after break-in.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Vehicle Fitment
- Fits 2022 Acura ILX, front
- Fits 2017-2021 Acura ILX, front
- Fits 2017-2020 Honda Civic, front
- Fits 2016-2017 Honda Accord, front
Common Brake Service Issues
- Front brake noise during stopping
- Rust buildup on exposed rotor surfaces
- Uneven pad wear or inconsistent pedal feel
- Longer stopping distances from worn rotors and pads
- Brake vibration caused by rotor surface irregularities
Installation Notes
Use this kit for front axle brake service only. Verify rotor size, caliper clearance, and vehicle trim before installation on a 2022 Acura ILX, 2017-2021 Acura ILX, 2017-2020 Honda Civic, or 2016-2017 Honda Accord. Clean the rotor friction surface before assembly if needed, and follow standard brake bedding procedures after installation to help establish even pad transfer.
Quality Assurance
Each DFC GEOSPEC rotor is 100% inspected after machining, including balance checks on vented rotors. The rotors are covered by a 12-month warranty against defects in material and workmanship. Part number 4502-59185 is built to OE specifications for durability, reliability, and stability.
Original: $204.37
-65%$204.37
$71.53Description
Front Brake Kit for Acura, Honda
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit combines coated front rotors and matched brake pads in one service package. It is built for drivers servicing a front brake job on select Acura ILX, Honda Civic, and Honda Accord applications.
- Front disc brake kit with rotors and pads
- DFC GEOSPEC coated rotors with silver-gray corrosion-resistant finish
- Dry-to-install rotor coating helps reduce prep time
- Non-directional rotor finish supports even pad bed-in and quieter stops
- DFC 5000 Advanced pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Part number 4502-59185
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads, part number 4502-59185, is a front brake service kit engineered for OE-style replacement on the listed vehicles. The rotors use G3000/G11H18 cast iron and are machined to tight tolerances, then finished with a non-directional surface to promote consistent pad contact. The coated rotor surface is designed to resist rust better than conventional paint or zinc finishes, while the dry packaging means the parts are ready for installation without cleaning off oil. The pad set is formulated for stable friction and improved initial bite after break-in.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Vehicle Fitment
- Fits 2022 Acura ILX, front
- Fits 2017-2021 Acura ILX, front
- Fits 2017-2020 Honda Civic, front
- Fits 2016-2017 Honda Accord, front
Common Brake Service Issues
- Front brake noise during stopping
- Rust buildup on exposed rotor surfaces
- Uneven pad wear or inconsistent pedal feel
- Longer stopping distances from worn rotors and pads
- Brake vibration caused by rotor surface irregularities
Installation Notes
Use this kit for front axle brake service only. Verify rotor size, caliper clearance, and vehicle trim before installation on a 2022 Acura ILX, 2017-2021 Acura ILX, 2017-2020 Honda Civic, or 2016-2017 Honda Accord. Clean the rotor friction surface before assembly if needed, and follow standard brake bedding procedures after installation to help establish even pad transfer.
Quality Assurance
Each DFC GEOSPEC rotor is 100% inspected after machining, including balance checks on vented rotors. The rotors are covered by a 12-month warranty against defects in material and workmanship. Part number 4502-59185 is built to OE specifications for durability, reliability, and stability.
