Dynamite Friction 4502-59179 Disc Brake Kit - Rear
Rear Brake Kit for 2016 Honda CR-Z
Built for the rear axle of the 2016 Honda CR-Z, this DFC brake kit combines GEOSPEC coated rotors with 5000 Advanced brake pads in one service package. It is a direct-fit disc brake kit for drivers looking for an OE-style rear brake replacement with corrosion protection and consistent pedal response.
Key Features
- Fits 2016 Honda CR-Z, rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed, dry-shipped rotors ready for installation
- G3000/G11H18 cast iron rotor construction for OE-spec durability and stability
- Non-directional rotor finish for more even pad bed-in and smoother braking
- DFC 5000 Advanced pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Part number 4502-59179
Product Details
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads line is engineered as a complete brake service solution for vehicles that need dependable rear stopping performance and corrosion protection. For the 2016 Honda CR-Z rear brake application, the coated rotors help resist rust while the matched pads are formulated for stable friction and quieter operation. The rotor machining process uses tight tolerances and a non-directional finish to support even contact during pad bed-in, while each vented rotor is inspected for balance and critical dimensions to meet OE specifications. Part number 4502-59179 is a practical choice for a rear brake job on the Honda CR-Z when you want matched components in one kit.
Common Problems This Kit Can Address
- Rear brake noise during light or moderate stops
- Rotor rust buildup on exposed braking surfaces
- Uneven braking feel from worn rear rotors and pads
- Longer stopping distances caused by worn friction material
- Brake vibration related to rotor wear or finish issues
Installation Notes
Compatible with the rear brake position on the 2016 Honda CR-Z. The rotors are shipped dry and ready to install, which can reduce prep time during service. For proper results, clean the hub mounting surface, inspect caliper hardware and slide pins, and follow the vehicle manufacturer’s bedding procedure after installation. Part number 4502-59179 should be verified against the vehicle’s rear brake configuration before service.
Quality Assurance
Each rotor is 100% inspected after machining to confirm critical dimensions and OE-spec requirements. DFC states that the rotors carry a 12-month warranty against defects in material and workmanship. The 5000 Advanced pads are post-cured, scorched, and assembled with premium shims to support stable friction and improved NVH control.
Rear Brake Kit for 2016 Honda CR-Z
Built for the rear axle of the 2016 Honda CR-Z, this DFC brake kit combines GEOSPEC coated rotors with 5000 Advanced brake pads in one service package. It is a direct-fit disc brake kit for drivers looking for an OE-style rear brake replacement with corrosion protection and consistent pedal response.
Key Features
- Fits 2016 Honda CR-Z, rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed, dry-shipped rotors ready for installation
- G3000/G11H18 cast iron rotor construction for OE-spec durability and stability
- Non-directional rotor finish for more even pad bed-in and smoother braking
- DFC 5000 Advanced pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Part number 4502-59179
Product Details
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads line is engineered as a complete brake service solution for vehicles that need dependable rear stopping performance and corrosion protection. For the 2016 Honda CR-Z rear brake application, the coated rotors help resist rust while the matched pads are formulated for stable friction and quieter operation. The rotor machining process uses tight tolerances and a non-directional finish to support even contact during pad bed-in, while each vented rotor is inspected for balance and critical dimensions to meet OE specifications. Part number 4502-59179 is a practical choice for a rear brake job on the Honda CR-Z when you want matched components in one kit.
Common Problems This Kit Can Address
- Rear brake noise during light or moderate stops
- Rotor rust buildup on exposed braking surfaces
- Uneven braking feel from worn rear rotors and pads
- Longer stopping distances caused by worn friction material
- Brake vibration related to rotor wear or finish issues
Installation Notes
Compatible with the rear brake position on the 2016 Honda CR-Z. The rotors are shipped dry and ready to install, which can reduce prep time during service. For proper results, clean the hub mounting surface, inspect caliper hardware and slide pins, and follow the vehicle manufacturer’s bedding procedure after installation. Part number 4502-59179 should be verified against the vehicle’s rear brake configuration before service.
Quality Assurance
Each rotor is 100% inspected after machining to confirm critical dimensions and OE-spec requirements. DFC states that the rotors carry a 12-month warranty against defects in material and workmanship. The 5000 Advanced pads are post-cured, scorched, and assembled with premium shims to support stable friction and improved NVH control.
Original: $126.41
-65%$126.41
$44.24Description
Rear Brake Kit for 2016 Honda CR-Z
Built for the rear axle of the 2016 Honda CR-Z, this DFC brake kit combines GEOSPEC coated rotors with 5000 Advanced brake pads in one service package. It is a direct-fit disc brake kit for drivers looking for an OE-style rear brake replacement with corrosion protection and consistent pedal response.
Key Features
- Fits 2016 Honda CR-Z, rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed, dry-shipped rotors ready for installation
- G3000/G11H18 cast iron rotor construction for OE-spec durability and stability
- Non-directional rotor finish for more even pad bed-in and smoother braking
- DFC 5000 Advanced pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Part number 4502-59179
Product Details
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads line is engineered as a complete brake service solution for vehicles that need dependable rear stopping performance and corrosion protection. For the 2016 Honda CR-Z rear brake application, the coated rotors help resist rust while the matched pads are formulated for stable friction and quieter operation. The rotor machining process uses tight tolerances and a non-directional finish to support even contact during pad bed-in, while each vented rotor is inspected for balance and critical dimensions to meet OE specifications. Part number 4502-59179 is a practical choice for a rear brake job on the Honda CR-Z when you want matched components in one kit.
Common Problems This Kit Can Address
- Rear brake noise during light or moderate stops
- Rotor rust buildup on exposed braking surfaces
- Uneven braking feel from worn rear rotors and pads
- Longer stopping distances caused by worn friction material
- Brake vibration related to rotor wear or finish issues
Installation Notes
Compatible with the rear brake position on the 2016 Honda CR-Z. The rotors are shipped dry and ready to install, which can reduce prep time during service. For proper results, clean the hub mounting surface, inspect caliper hardware and slide pins, and follow the vehicle manufacturer’s bedding procedure after installation. Part number 4502-59179 should be verified against the vehicle’s rear brake configuration before service.
Quality Assurance
Each rotor is 100% inspected after machining to confirm critical dimensions and OE-spec requirements. DFC states that the rotors carry a 12-month warranty against defects in material and workmanship. The 5000 Advanced pads are post-cured, scorched, and assembled with premium shims to support stable friction and improved NVH control.
