Dynamite Friction 4502-59172 Disc Brake Kit - Front
Front Brake Kit for Honda and Acura
Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads, part number 4502-59172, is a front disc brake kit built for OE-style service replacement. It combines coated rotors and advanced friction pads for drivers servicing a Honda Pilot, Honda Ridgeline, or Acura MDX front brake system.
Key Features
- Complete front brake kit with rotors and pads
- GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed, dry-shipped rotors ready for installation
- G3000/G11H18 cast iron rotor construction for OE-spec durability and stability
- Non-directional rotor finish for more even pad bed-in and smoother braking
- 100% inspected rotors, including balance correction on vented units
- 5000 Advanced pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
Product Details
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads line is built around matched braking components for front axle service. The coated rotors resist rust better than conventional painted or zinc-coated finishes, while the pad compound is prepared to reduce initial break-in time and deliver consistent stopping response from the first stop. This part number, 4502-59172, is a practical choice for routine brake replacement on the Honda Pilot, Honda Ridgeline, and Acura MDX.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Brake pulsation from worn or uneven front rotors
- Reduced stopping performance from aged pads
- Rotor surface rust on vehicles exposed to moisture and road salt
- Brake noise and harshness during everyday driving
- Longer service time caused by oil-coated replacement rotors
Installation Notes
Compatible With front brake service on 2022 Honda Pilot, 2022 Honda Ridgeline, 2016-2021 Honda Pilot, 2017-2021 Honda Ridgeline, and 2017-2020 Acura MDX. The rotors are shipped dry and ready to install, which helps reduce prep time during a standard brake job. Follow proper brake service procedures, clean all mating surfaces, and bed the pads according to the vehicle service process after installation.
Quality Assurance
Each rotor is machined to tight tolerances, finished with a non-directional surface, and inspected to confirm critical dimensions and OE-spec requirements. Vented rotors are balance-checked and corrected when needed. DFC backs the rotors with a 12-month warranty against defects in material and workmanship.
Front Brake Kit for Honda and Acura
Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads, part number 4502-59172, is a front disc brake kit built for OE-style service replacement. It combines coated rotors and advanced friction pads for drivers servicing a Honda Pilot, Honda Ridgeline, or Acura MDX front brake system.
Key Features
- Complete front brake kit with rotors and pads
- GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed, dry-shipped rotors ready for installation
- G3000/G11H18 cast iron rotor construction for OE-spec durability and stability
- Non-directional rotor finish for more even pad bed-in and smoother braking
- 100% inspected rotors, including balance correction on vented units
- 5000 Advanced pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
Product Details
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads line is built around matched braking components for front axle service. The coated rotors resist rust better than conventional painted or zinc-coated finishes, while the pad compound is prepared to reduce initial break-in time and deliver consistent stopping response from the first stop. This part number, 4502-59172, is a practical choice for routine brake replacement on the Honda Pilot, Honda Ridgeline, and Acura MDX.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Brake pulsation from worn or uneven front rotors
- Reduced stopping performance from aged pads
- Rotor surface rust on vehicles exposed to moisture and road salt
- Brake noise and harshness during everyday driving
- Longer service time caused by oil-coated replacement rotors
Installation Notes
Compatible With front brake service on 2022 Honda Pilot, 2022 Honda Ridgeline, 2016-2021 Honda Pilot, 2017-2021 Honda Ridgeline, and 2017-2020 Acura MDX. The rotors are shipped dry and ready to install, which helps reduce prep time during a standard brake job. Follow proper brake service procedures, clean all mating surfaces, and bed the pads according to the vehicle service process after installation.
Quality Assurance
Each rotor is machined to tight tolerances, finished with a non-directional surface, and inspected to confirm critical dimensions and OE-spec requirements. Vented rotors are balance-checked and corrected when needed. DFC backs the rotors with a 12-month warranty against defects in material and workmanship.
Original: $245.24
-65%$245.24
$85.83Description
Front Brake Kit for Honda and Acura
Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads, part number 4502-59172, is a front disc brake kit built for OE-style service replacement. It combines coated rotors and advanced friction pads for drivers servicing a Honda Pilot, Honda Ridgeline, or Acura MDX front brake system.
Key Features
- Complete front brake kit with rotors and pads
- GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed, dry-shipped rotors ready for installation
- G3000/G11H18 cast iron rotor construction for OE-spec durability and stability
- Non-directional rotor finish for more even pad bed-in and smoother braking
- 100% inspected rotors, including balance correction on vented units
- 5000 Advanced pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
Product Details
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads line is built around matched braking components for front axle service. The coated rotors resist rust better than conventional painted or zinc-coated finishes, while the pad compound is prepared to reduce initial break-in time and deliver consistent stopping response from the first stop. This part number, 4502-59172, is a practical choice for routine brake replacement on the Honda Pilot, Honda Ridgeline, and Acura MDX.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Brake pulsation from worn or uneven front rotors
- Reduced stopping performance from aged pads
- Rotor surface rust on vehicles exposed to moisture and road salt
- Brake noise and harshness during everyday driving
- Longer service time caused by oil-coated replacement rotors
Installation Notes
Compatible With front brake service on 2022 Honda Pilot, 2022 Honda Ridgeline, 2016-2021 Honda Pilot, 2017-2021 Honda Ridgeline, and 2017-2020 Acura MDX. The rotors are shipped dry and ready to install, which helps reduce prep time during a standard brake job. Follow proper brake service procedures, clean all mating surfaces, and bed the pads according to the vehicle service process after installation.
Quality Assurance
Each rotor is machined to tight tolerances, finished with a non-directional surface, and inspected to confirm critical dimensions and OE-spec requirements. Vented rotors are balance-checked and corrected when needed. DFC backs the rotors with a 12-month warranty against defects in material and workmanship.
