Dynamite Friction 4502-59170 Disc Brake Kit - Front
Front Brake Kit for Honda CR-V
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit is built for front brake service on the 2012-2016 Honda CR-V. It combines coated rotors and matched friction material in one Disc Brake Kit, helping simplify brake replacement for this application.
Key Features
- Part number 4502-59170
- Front brake kit for 2012-2016 Honda CR-V
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed, dry-shipped rotors ready for installation
- G3000/G11H18 cast iron rotor construction for OE-style durability and stability
- Non-directional rotor finish for more even pad bed-in and smoother braking
- DFC 5000 Advanced Brake Pads with post-cured friction material
- Scorched pads to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are designed as a complete front brake service solution for the Honda CR-V. The rotors are machined to tight tolerances, inspected for critical dimensions, and balanced where required to support consistent braking performance. The coated surface helps resist rust better than conventional paint or zinc finishes, while the dry packaging avoids the need to clean oil from the rotor before installation. The pad set is formulated for stable friction performance and quieter operation through post-curing, scorching, and premium shims. Part number 4502-59170 is a direct fit for front brake service on the 2012-2016 Honda CR-V.
What This Brake Kit Helps Address
- Brake pulsation from worn or uneven front rotors
- Reduced stopping performance from aged pad material
- Brake noise caused by worn friction components
- Rust buildup on exposed rotor surfaces
- Longer service time from separate rotor and pad sourcing
Installation Notes and Tips
Fits 2012-2016 Honda CR-V, front. Verify rotor size, caliper condition, and pad wear indicators before installation. Clean the hub mounting surface and follow proper torque procedures during reassembly. A normal brake job can take about 1.25 to 2.5 hours per axle, and the dry rotor finish helps reduce prep time. Part number 4502-59170 should be matched to the front axle only for the listed vehicle application.
Quality Assurance
DFC GEOSPEC rotors are manufactured to OE specifications, inspected for critical attributes, and backed by a 12-month warranty against defects in material and workmanship. The 5000 Advanced Brake Pads are post-cured and scorched for stable friction performance, with premium shims added for improved NVH control. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Front Brake Kit for Honda CR-V
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit is built for front brake service on the 2012-2016 Honda CR-V. It combines coated rotors and matched friction material in one Disc Brake Kit, helping simplify brake replacement for this application.
Key Features
- Part number 4502-59170
- Front brake kit for 2012-2016 Honda CR-V
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed, dry-shipped rotors ready for installation
- G3000/G11H18 cast iron rotor construction for OE-style durability and stability
- Non-directional rotor finish for more even pad bed-in and smoother braking
- DFC 5000 Advanced Brake Pads with post-cured friction material
- Scorched pads to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are designed as a complete front brake service solution for the Honda CR-V. The rotors are machined to tight tolerances, inspected for critical dimensions, and balanced where required to support consistent braking performance. The coated surface helps resist rust better than conventional paint or zinc finishes, while the dry packaging avoids the need to clean oil from the rotor before installation. The pad set is formulated for stable friction performance and quieter operation through post-curing, scorching, and premium shims. Part number 4502-59170 is a direct fit for front brake service on the 2012-2016 Honda CR-V.
What This Brake Kit Helps Address
- Brake pulsation from worn or uneven front rotors
- Reduced stopping performance from aged pad material
- Brake noise caused by worn friction components
- Rust buildup on exposed rotor surfaces
- Longer service time from separate rotor and pad sourcing
Installation Notes and Tips
Fits 2012-2016 Honda CR-V, front. Verify rotor size, caliper condition, and pad wear indicators before installation. Clean the hub mounting surface and follow proper torque procedures during reassembly. A normal brake job can take about 1.25 to 2.5 hours per axle, and the dry rotor finish helps reduce prep time. Part number 4502-59170 should be matched to the front axle only for the listed vehicle application.
Quality Assurance
DFC GEOSPEC rotors are manufactured to OE specifications, inspected for critical attributes, and backed by a 12-month warranty against defects in material and workmanship. The 5000 Advanced Brake Pads are post-cured and scorched for stable friction performance, with premium shims added for improved NVH control. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Original: $214.55
-65%$214.55
$75.09Description
Front Brake Kit for Honda CR-V
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit is built for front brake service on the 2012-2016 Honda CR-V. It combines coated rotors and matched friction material in one Disc Brake Kit, helping simplify brake replacement for this application.
Key Features
- Part number 4502-59170
- Front brake kit for 2012-2016 Honda CR-V
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed, dry-shipped rotors ready for installation
- G3000/G11H18 cast iron rotor construction for OE-style durability and stability
- Non-directional rotor finish for more even pad bed-in and smoother braking
- DFC 5000 Advanced Brake Pads with post-cured friction material
- Scorched pads to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are designed as a complete front brake service solution for the Honda CR-V. The rotors are machined to tight tolerances, inspected for critical dimensions, and balanced where required to support consistent braking performance. The coated surface helps resist rust better than conventional paint or zinc finishes, while the dry packaging avoids the need to clean oil from the rotor before installation. The pad set is formulated for stable friction performance and quieter operation through post-curing, scorching, and premium shims. Part number 4502-59170 is a direct fit for front brake service on the 2012-2016 Honda CR-V.
What This Brake Kit Helps Address
- Brake pulsation from worn or uneven front rotors
- Reduced stopping performance from aged pad material
- Brake noise caused by worn friction components
- Rust buildup on exposed rotor surfaces
- Longer service time from separate rotor and pad sourcing
Installation Notes and Tips
Fits 2012-2016 Honda CR-V, front. Verify rotor size, caliper condition, and pad wear indicators before installation. Clean the hub mounting surface and follow proper torque procedures during reassembly. A normal brake job can take about 1.25 to 2.5 hours per axle, and the dry rotor finish helps reduce prep time. Part number 4502-59170 should be matched to the front axle only for the listed vehicle application.
Quality Assurance
DFC GEOSPEC rotors are manufactured to OE specifications, inspected for critical attributes, and backed by a 12-month warranty against defects in material and workmanship. The 5000 Advanced Brake Pads are post-cured and scorched for stable friction performance, with premium shims added for improved NVH control. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
