Dynamite Friction 4502-59122 Disc Brake Kit - Rear
Rear Brake Kit for Honda Crosstour and Accord Crosstour
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit is a rear disc brake service kit built for select Honda applications. Part number 4502-59122 combines coated rotors and advanced friction pads in one package for a straightforward rear brake replacement on the 2010-2015 Honda Crosstour and Accord Crosstour.
Key Features
- Rear disc brake kit with rotors and pads in one package
- Compatible with 2012-2015 Honda Crosstour, rear
- Compatible with 2010-2011 Honda Accord Crosstour, rear
- GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install
- Non-directional rotor finish supports even pad bed-in and smoother braking
- 5000 Advanced Brake Pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Part number 4502-59122
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are engineered as an OE-style rear brake service solution for Honda Crosstour and Honda Accord Crosstour models. The rotors use G3000/G11H18 cast iron and are machined to tight tolerances, then finished with a non-directional surface to promote consistent pad contact. The coating is designed to resist rust better than conventional paint or zinc finishes, while the dry packaging helps eliminate extra prep before installation. The 5000 Advanced pads are formulated for stable friction, with post-curing and scorching steps that reduce initial break-in demands. Part number 4502-59122 is a practical choice for rear brake service on the 2010-2015 Honda Crosstour and Accord Crosstour.
What This Kit Helps Address
- Rear brake pulsation from worn or uneven rotors
- Brake noise caused by aged pads or poor pad-to-rotor contact
- Rust buildup on exposed rotor surfaces
- Reduced stopping performance from worn friction material
- Extended service time when rotors and pads are replaced separately
Installation Notes and Tips
Install on the rear axle only for the listed Honda applications. Before assembly, inspect calipers, slides, and brake fluid condition so the new rotors and pads can perform as intended. A proper bed-in procedure after installation helps establish even pad transfer on the rotor surface. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Quality Assurance
Each DFC GEOSPEC rotor is inspected for critical dimensions and balance, with vented rotors corrected as needed during the mill-balance process. The finished rotors are checked against OE specifications, and the kit includes a 12-month warranty against defects in material and workmanship. Part number 4502-59122 is built to meet the demands of rear brake service on the Honda Crosstour and Honda Accord Crosstour.
Rear Brake Kit for Honda Crosstour and Accord Crosstour
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit is a rear disc brake service kit built for select Honda applications. Part number 4502-59122 combines coated rotors and advanced friction pads in one package for a straightforward rear brake replacement on the 2010-2015 Honda Crosstour and Accord Crosstour.
Key Features
- Rear disc brake kit with rotors and pads in one package
- Compatible with 2012-2015 Honda Crosstour, rear
- Compatible with 2010-2011 Honda Accord Crosstour, rear
- GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install
- Non-directional rotor finish supports even pad bed-in and smoother braking
- 5000 Advanced Brake Pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Part number 4502-59122
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are engineered as an OE-style rear brake service solution for Honda Crosstour and Honda Accord Crosstour models. The rotors use G3000/G11H18 cast iron and are machined to tight tolerances, then finished with a non-directional surface to promote consistent pad contact. The coating is designed to resist rust better than conventional paint or zinc finishes, while the dry packaging helps eliminate extra prep before installation. The 5000 Advanced pads are formulated for stable friction, with post-curing and scorching steps that reduce initial break-in demands. Part number 4502-59122 is a practical choice for rear brake service on the 2010-2015 Honda Crosstour and Accord Crosstour.
What This Kit Helps Address
- Rear brake pulsation from worn or uneven rotors
- Brake noise caused by aged pads or poor pad-to-rotor contact
- Rust buildup on exposed rotor surfaces
- Reduced stopping performance from worn friction material
- Extended service time when rotors and pads are replaced separately
Installation Notes and Tips
Install on the rear axle only for the listed Honda applications. Before assembly, inspect calipers, slides, and brake fluid condition so the new rotors and pads can perform as intended. A proper bed-in procedure after installation helps establish even pad transfer on the rotor surface. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Quality Assurance
Each DFC GEOSPEC rotor is inspected for critical dimensions and balance, with vented rotors corrected as needed during the mill-balance process. The finished rotors are checked against OE specifications, and the kit includes a 12-month warranty against defects in material and workmanship. Part number 4502-59122 is built to meet the demands of rear brake service on the Honda Crosstour and Honda Accord Crosstour.
Original: $141.18
-65%$141.18
$49.41Description
Rear Brake Kit for Honda Crosstour and Accord Crosstour
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit is a rear disc brake service kit built for select Honda applications. Part number 4502-59122 combines coated rotors and advanced friction pads in one package for a straightforward rear brake replacement on the 2010-2015 Honda Crosstour and Accord Crosstour.
Key Features
- Rear disc brake kit with rotors and pads in one package
- Compatible with 2012-2015 Honda Crosstour, rear
- Compatible with 2010-2011 Honda Accord Crosstour, rear
- GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install
- Non-directional rotor finish supports even pad bed-in and smoother braking
- 5000 Advanced Brake Pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Part number 4502-59122
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are engineered as an OE-style rear brake service solution for Honda Crosstour and Honda Accord Crosstour models. The rotors use G3000/G11H18 cast iron and are machined to tight tolerances, then finished with a non-directional surface to promote consistent pad contact. The coating is designed to resist rust better than conventional paint or zinc finishes, while the dry packaging helps eliminate extra prep before installation. The 5000 Advanced pads are formulated for stable friction, with post-curing and scorching steps that reduce initial break-in demands. Part number 4502-59122 is a practical choice for rear brake service on the 2010-2015 Honda Crosstour and Accord Crosstour.
What This Kit Helps Address
- Rear brake pulsation from worn or uneven rotors
- Brake noise caused by aged pads or poor pad-to-rotor contact
- Rust buildup on exposed rotor surfaces
- Reduced stopping performance from worn friction material
- Extended service time when rotors and pads are replaced separately
Installation Notes and Tips
Install on the rear axle only for the listed Honda applications. Before assembly, inspect calipers, slides, and brake fluid condition so the new rotors and pads can perform as intended. A proper bed-in procedure after installation helps establish even pad transfer on the rotor surface. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Quality Assurance
Each DFC GEOSPEC rotor is inspected for critical dimensions and balance, with vented rotors corrected as needed during the mill-balance process. The finished rotors are checked against OE specifications, and the kit includes a 12-month warranty against defects in material and workmanship. Part number 4502-59122 is built to meet the demands of rear brake service on the Honda Crosstour and Honda Accord Crosstour.
