Dynamite Friction 4502-52033 Disc Brake Kit - Rear
Rear Brake Kit for Pontiac G8
Restore rear braking performance on the 2008-2009 Pontiac G8 with this DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit. Part number 4502-52033 combines coated rear rotors and matched friction material for a direct-service brake repair on the rear axle.
Built for the Pontiac G8 rear application, this kit is engineered to deliver OE-style fitment, stable pad performance, and corrosion-resistant rotor protection in one package.
Key Features
- Complete rear disc brake kit with rotors and pads
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install
- Non-directional rotor finish supports even pad bed-in and quieter stops
- 5000 Advanced Brake Pads are post-cured and scorched for consistent friction
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- OE-spec cast iron rotor construction for durability and stability
- Part number 4502-52033 for rear brake service on Pontiac G8 models
Product Details
DFC’s GEOSPEC rotor line focuses on corrosion protection and installation efficiency. The coated surface helps resist rust better than conventional paint or zinc finishes, while the dry packaging means there is no oil coating to clean before installation. The rotors are machined to tight tolerances, finished for consistent contact, and inspected for balance and critical dimensions. The 5000 Advanced pads are formulated for stable friction, with post-curing and scorching used to reduce initial break-in requirements and support immediate stopping response. For shoppers searching for a rear brake kit for 2008 Pontiac G8 or a 2009 Pontiac G8 rear disc brake kit, part number 4502-52033 is the matched service solution.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Rear brake noise during stops
- Rust buildup on exposed rotor surfaces
- Uneven pad bedding after brake service
- Reduced braking response from worn rear components
- Brake vibration caused by rotor wear or imbalance
Installation Notes
Fits 2008 Pontiac G8, rear. Fits 2009 Pontiac G8, rear. Verify rotor size and rear axle application before installation; the fitment notes list 298mm front rotors and 302mm rear rotors for the 2009 Pontiac G8 rear application. Clean mating surfaces, follow proper torque procedures, and complete a standard brake bed-in after installation. Part number 4502-52033 is intended for rear axle service only.
Quality Assurance
Each rotor is manufactured to OE specifications and passes 100% inspection for critical attributes. Vented rotors are balance-checked and corrected when needed, and every rotor includes a 12-month warranty against defects in material and workmanship.
Rear Brake Kit for Pontiac G8
Restore rear braking performance on the 2008-2009 Pontiac G8 with this DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit. Part number 4502-52033 combines coated rear rotors and matched friction material for a direct-service brake repair on the rear axle.
Built for the Pontiac G8 rear application, this kit is engineered to deliver OE-style fitment, stable pad performance, and corrosion-resistant rotor protection in one package.
Key Features
- Complete rear disc brake kit with rotors and pads
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install
- Non-directional rotor finish supports even pad bed-in and quieter stops
- 5000 Advanced Brake Pads are post-cured and scorched for consistent friction
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- OE-spec cast iron rotor construction for durability and stability
- Part number 4502-52033 for rear brake service on Pontiac G8 models
Product Details
DFC’s GEOSPEC rotor line focuses on corrosion protection and installation efficiency. The coated surface helps resist rust better than conventional paint or zinc finishes, while the dry packaging means there is no oil coating to clean before installation. The rotors are machined to tight tolerances, finished for consistent contact, and inspected for balance and critical dimensions. The 5000 Advanced pads are formulated for stable friction, with post-curing and scorching used to reduce initial break-in requirements and support immediate stopping response. For shoppers searching for a rear brake kit for 2008 Pontiac G8 or a 2009 Pontiac G8 rear disc brake kit, part number 4502-52033 is the matched service solution.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Rear brake noise during stops
- Rust buildup on exposed rotor surfaces
- Uneven pad bedding after brake service
- Reduced braking response from worn rear components
- Brake vibration caused by rotor wear or imbalance
Installation Notes
Fits 2008 Pontiac G8, rear. Fits 2009 Pontiac G8, rear. Verify rotor size and rear axle application before installation; the fitment notes list 298mm front rotors and 302mm rear rotors for the 2009 Pontiac G8 rear application. Clean mating surfaces, follow proper torque procedures, and complete a standard brake bed-in after installation. Part number 4502-52033 is intended for rear axle service only.
Quality Assurance
Each rotor is manufactured to OE specifications and passes 100% inspection for critical attributes. Vented rotors are balance-checked and corrected when needed, and every rotor includes a 12-month warranty against defects in material and workmanship.
Original: $184.85
-65%$184.85
$64.70Description
Rear Brake Kit for Pontiac G8
Restore rear braking performance on the 2008-2009 Pontiac G8 with this DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit. Part number 4502-52033 combines coated rear rotors and matched friction material for a direct-service brake repair on the rear axle.
Built for the Pontiac G8 rear application, this kit is engineered to deliver OE-style fitment, stable pad performance, and corrosion-resistant rotor protection in one package.
Key Features
- Complete rear disc brake kit with rotors and pads
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install
- Non-directional rotor finish supports even pad bed-in and quieter stops
- 5000 Advanced Brake Pads are post-cured and scorched for consistent friction
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- OE-spec cast iron rotor construction for durability and stability
- Part number 4502-52033 for rear brake service on Pontiac G8 models
Product Details
DFC’s GEOSPEC rotor line focuses on corrosion protection and installation efficiency. The coated surface helps resist rust better than conventional paint or zinc finishes, while the dry packaging means there is no oil coating to clean before installation. The rotors are machined to tight tolerances, finished for consistent contact, and inspected for balance and critical dimensions. The 5000 Advanced pads are formulated for stable friction, with post-curing and scorching used to reduce initial break-in requirements and support immediate stopping response. For shoppers searching for a rear brake kit for 2008 Pontiac G8 or a 2009 Pontiac G8 rear disc brake kit, part number 4502-52033 is the matched service solution.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Rear brake noise during stops
- Rust buildup on exposed rotor surfaces
- Uneven pad bedding after brake service
- Reduced braking response from worn rear components
- Brake vibration caused by rotor wear or imbalance
Installation Notes
Fits 2008 Pontiac G8, rear. Fits 2009 Pontiac G8, rear. Verify rotor size and rear axle application before installation; the fitment notes list 298mm front rotors and 302mm rear rotors for the 2009 Pontiac G8 rear application. Clean mating surfaces, follow proper torque procedures, and complete a standard brake bed-in after installation. Part number 4502-52033 is intended for rear axle service only.
Quality Assurance
Each rotor is manufactured to OE specifications and passes 100% inspection for critical attributes. Vented rotors are balance-checked and corrected when needed, and every rotor includes a 12-month warranty against defects in material and workmanship.
