Dynamite Friction 4502-48133 Disc Brake Kit - Front
Brake Kit for GM Heavy-Duty Trucks
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit is a front disc brake service kit for select Chevrolet and GMC trucks and SUVs. Part number 4502-48133 combines coated rotors and matched friction material for OE-style service on older GM applications, including Chevrolet K20, Chevrolet V2500 Suburban, GMC K2500, and GMC V2500 Suburban models.
Key Features
- Front disc brake kit with DFC GEOSPEC coated rotors and DFC 5000 Advanced brake pads
- Silver-gray rotor coating helps resist rust better than conventional paint or zinc finishes
- Dry-processed, dry-shipped rotors are ready to install without extra cleaning
- G3000/G11H18 cast iron rotor construction for OE-spec durability and stability
- Non-directional rotor finish supports even pad bed-in and smoother braking
- 100% inspected rotors with balance correction on vented applications
- Post-cured, scorched pads with premium rubber-steel-rubber shims for improved NVH control
- Part number 4502-48133 for front brake service on select GM 4x4 applications
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are built for drivers servicing front brakes on 1979-1991 Chevrolet and GMC trucks and SUVs. The rotor coating is applied to protect against corrosion while remaining safe for the friction surface during break-in. The pads are formulated for stable friction performance, reduced initial break-in, and quieter operation through premium shim construction. This kit is a practical choice for Chevrolet K20 and K20 Suburban, GMC K2500 and K2500 Suburban, Chevrolet V20 and V20 Suburban, plus Chevrolet V2500 Suburban and GMC V2500 Suburban front brake applications. Part number 4502-48133 is also a useful reference when sourcing the correct front brake kit for these GM platforms.
What This Brake Kit Helps Address
- Front brake rotor rust and surface corrosion
- Brake noise, vibration, and harshness during stopping
- Uneven pad bedding after rotor replacement
- Reduced stopping consistency from worn front brake components
- Time lost cleaning oil-coated replacement rotors before installation
Installation Notes
Fits 1989-1991 Chevrolet V2500 Suburban, front. Fits 1989-1991 GMC V2500 Suburban, front. Fits 1987 Chevrolet V20, front. Fits 1987 Chevrolet V20 Suburban, front. Fits 1987 GMC V2500, front. Fits 1985-1986 Chevrolet K20, front. Fits 1979-1986 Chevrolet K20 Suburban, front. Fits 1979-1986 GMC K2500, front. Fits 1985-1986 GMC K2500 Suburban, front. Fits 1979-1980 GMC K2500 Suburban, front. Fits 1981-1984 Chevrolet K20, front. Fits 1981-1984 GMC K2500 Suburban, front. Fits 1979-1980 Chevrolet K20, front.
Verify axle and brake configuration before ordering, especially on vehicles with JB7, JD7, or rear drum variations noted in the fitment data. This front kit is intended for the listed applications only.
Quality Assurance
DFC machines each rotor to tight tolerances, applies a non-directional finish, and inspects critical dimensions to help ensure OE-spec fit and function. Vented rotors are balance-checked and corrected when needed. Rotors include a 12-month warranty against defects in material and workmanship.
Brake Kit for GM Heavy-Duty Trucks
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit is a front disc brake service kit for select Chevrolet and GMC trucks and SUVs. Part number 4502-48133 combines coated rotors and matched friction material for OE-style service on older GM applications, including Chevrolet K20, Chevrolet V2500 Suburban, GMC K2500, and GMC V2500 Suburban models.
Key Features
- Front disc brake kit with DFC GEOSPEC coated rotors and DFC 5000 Advanced brake pads
- Silver-gray rotor coating helps resist rust better than conventional paint or zinc finishes
- Dry-processed, dry-shipped rotors are ready to install without extra cleaning
- G3000/G11H18 cast iron rotor construction for OE-spec durability and stability
- Non-directional rotor finish supports even pad bed-in and smoother braking
- 100% inspected rotors with balance correction on vented applications
- Post-cured, scorched pads with premium rubber-steel-rubber shims for improved NVH control
- Part number 4502-48133 for front brake service on select GM 4x4 applications
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are built for drivers servicing front brakes on 1979-1991 Chevrolet and GMC trucks and SUVs. The rotor coating is applied to protect against corrosion while remaining safe for the friction surface during break-in. The pads are formulated for stable friction performance, reduced initial break-in, and quieter operation through premium shim construction. This kit is a practical choice for Chevrolet K20 and K20 Suburban, GMC K2500 and K2500 Suburban, Chevrolet V20 and V20 Suburban, plus Chevrolet V2500 Suburban and GMC V2500 Suburban front brake applications. Part number 4502-48133 is also a useful reference when sourcing the correct front brake kit for these GM platforms.
What This Brake Kit Helps Address
- Front brake rotor rust and surface corrosion
- Brake noise, vibration, and harshness during stopping
- Uneven pad bedding after rotor replacement
- Reduced stopping consistency from worn front brake components
- Time lost cleaning oil-coated replacement rotors before installation
Installation Notes
Fits 1989-1991 Chevrolet V2500 Suburban, front. Fits 1989-1991 GMC V2500 Suburban, front. Fits 1987 Chevrolet V20, front. Fits 1987 Chevrolet V20 Suburban, front. Fits 1987 GMC V2500, front. Fits 1985-1986 Chevrolet K20, front. Fits 1979-1986 Chevrolet K20 Suburban, front. Fits 1979-1986 GMC K2500, front. Fits 1985-1986 GMC K2500 Suburban, front. Fits 1979-1980 GMC K2500 Suburban, front. Fits 1981-1984 Chevrolet K20, front. Fits 1981-1984 GMC K2500 Suburban, front. Fits 1979-1980 Chevrolet K20, front.
Verify axle and brake configuration before ordering, especially on vehicles with JB7, JD7, or rear drum variations noted in the fitment data. This front kit is intended for the listed applications only.
Quality Assurance
DFC machines each rotor to tight tolerances, applies a non-directional finish, and inspects critical dimensions to help ensure OE-spec fit and function. Vented rotors are balance-checked and corrected when needed. Rotors include a 12-month warranty against defects in material and workmanship.
Original: $220.93
-65%$220.93
$77.33Description
Brake Kit for GM Heavy-Duty Trucks
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit is a front disc brake service kit for select Chevrolet and GMC trucks and SUVs. Part number 4502-48133 combines coated rotors and matched friction material for OE-style service on older GM applications, including Chevrolet K20, Chevrolet V2500 Suburban, GMC K2500, and GMC V2500 Suburban models.
Key Features
- Front disc brake kit with DFC GEOSPEC coated rotors and DFC 5000 Advanced brake pads
- Silver-gray rotor coating helps resist rust better than conventional paint or zinc finishes
- Dry-processed, dry-shipped rotors are ready to install without extra cleaning
- G3000/G11H18 cast iron rotor construction for OE-spec durability and stability
- Non-directional rotor finish supports even pad bed-in and smoother braking
- 100% inspected rotors with balance correction on vented applications
- Post-cured, scorched pads with premium rubber-steel-rubber shims for improved NVH control
- Part number 4502-48133 for front brake service on select GM 4x4 applications
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are built for drivers servicing front brakes on 1979-1991 Chevrolet and GMC trucks and SUVs. The rotor coating is applied to protect against corrosion while remaining safe for the friction surface during break-in. The pads are formulated for stable friction performance, reduced initial break-in, and quieter operation through premium shim construction. This kit is a practical choice for Chevrolet K20 and K20 Suburban, GMC K2500 and K2500 Suburban, Chevrolet V20 and V20 Suburban, plus Chevrolet V2500 Suburban and GMC V2500 Suburban front brake applications. Part number 4502-48133 is also a useful reference when sourcing the correct front brake kit for these GM platforms.
What This Brake Kit Helps Address
- Front brake rotor rust and surface corrosion
- Brake noise, vibration, and harshness during stopping
- Uneven pad bedding after rotor replacement
- Reduced stopping consistency from worn front brake components
- Time lost cleaning oil-coated replacement rotors before installation
Installation Notes
Fits 1989-1991 Chevrolet V2500 Suburban, front. Fits 1989-1991 GMC V2500 Suburban, front. Fits 1987 Chevrolet V20, front. Fits 1987 Chevrolet V20 Suburban, front. Fits 1987 GMC V2500, front. Fits 1985-1986 Chevrolet K20, front. Fits 1979-1986 Chevrolet K20 Suburban, front. Fits 1979-1986 GMC K2500, front. Fits 1985-1986 GMC K2500 Suburban, front. Fits 1979-1980 GMC K2500 Suburban, front. Fits 1981-1984 Chevrolet K20, front. Fits 1981-1984 GMC K2500 Suburban, front. Fits 1979-1980 Chevrolet K20, front.
Verify axle and brake configuration before ordering, especially on vehicles with JB7, JD7, or rear drum variations noted in the fitment data. This front kit is intended for the listed applications only.
Quality Assurance
DFC machines each rotor to tight tolerances, applies a non-directional finish, and inspects critical dimensions to help ensure OE-spec fit and function. Vented rotors are balance-checked and corrected when needed. Rotors include a 12-month warranty against defects in material and workmanship.
