Dynamite Friction 4502-47083 Disc Brake Kit - Rear
Rear Brake Kit for Camaro and CTS
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit combines coated rear rotors and matched friction material for service on select Chevrolet Camaro and Cadillac CTS applications. Part number 4502-47083 is built for drivers replacing worn rear brake components with an OE-style disc brake kit.
Key Features
- DFC GEOSPEC coated brake rotors with a silver-gray corrosion-resistant finish
- Dry, ready-to-install rotor surface with no oil cleaning required before installation
- G3000/G11H18 cast iron rotor construction for OE-spec durability and stability
- Non-directional rotor finish for more even pad bed-in and smoother braking
- 100% inspected rotors with balance correction on vented designs
- DFC 5000 Advanced Brake Pads with post-cured friction material
- Scorched pads to reduce initial break-in time and improve first-stop response
- Rubber-steel-rubber shims for improved noise, vibration, and harshness control
Product Details
This DFC brake service kit is engineered for rear axle replacement on 2010-2015 Chevrolet Camaro, rear; 2022 Chevrolet Camaro, rear; and select Cadillac CTS rear applications from 2009-2019. It is also listed for configurations including 2-piece front rotors, 1-piece optional design full cast front rotors, and aluminum hat front rotor setups on the CTS, making it a fitment-focused solution for specific brake package variations. The part number 4502-47083 is designed to support consistent stopping performance, quieter operation, and a cleaner installation process on vehicles such as the Chevrolet Camaro and Cadillac CTS.
DFC’s GEOSPEC rotor line uses a coated finish to resist rust better than conventional paint or zinc-style coatings, while the machined surface and non-directional finish help promote even pad contact. The included 5000 Advanced pads are formulated for stable friction behavior and are assembled with premium shims to help reduce brake noise.
What It Helps Address
- Rear brake wear, scoring, or rotor thickness variation
- Brake noise caused by worn pads or uneven rotor surfaces
- Rust buildup on exposed rotor hats and edges
- Longer pedal travel from degraded rear brake components
- Uneven braking feel during routine brake service
Installation Notes and Tips
Fits 2010-2015 Chevrolet Camaro, rear. Fits 2022 Chevrolet Camaro, rear. Fits 2009-2015 Cadillac CTS, rear. Fits 2016-2019 Cadillac CTS, rear. Confirm the front brake configuration listed in the fitment notes before ordering, since CTS applications vary by rotor design. The rotors are shipped dry and ready to install, which helps reduce prep time during brake service. Follow proper brake bedding procedures after installation for consistent pad transfer and braking feel.
Quality Assurance
Each rotor is machined to tight tolerances, checked for critical dimensions, and inspected for balance where applicable before release. DFC states that every rotor carries a 12-month warranty against defects in material and workmanship.
Rear Brake Kit for Camaro and CTS
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit combines coated rear rotors and matched friction material for service on select Chevrolet Camaro and Cadillac CTS applications. Part number 4502-47083 is built for drivers replacing worn rear brake components with an OE-style disc brake kit.
Key Features
- DFC GEOSPEC coated brake rotors with a silver-gray corrosion-resistant finish
- Dry, ready-to-install rotor surface with no oil cleaning required before installation
- G3000/G11H18 cast iron rotor construction for OE-spec durability and stability
- Non-directional rotor finish for more even pad bed-in and smoother braking
- 100% inspected rotors with balance correction on vented designs
- DFC 5000 Advanced Brake Pads with post-cured friction material
- Scorched pads to reduce initial break-in time and improve first-stop response
- Rubber-steel-rubber shims for improved noise, vibration, and harshness control
Product Details
This DFC brake service kit is engineered for rear axle replacement on 2010-2015 Chevrolet Camaro, rear; 2022 Chevrolet Camaro, rear; and select Cadillac CTS rear applications from 2009-2019. It is also listed for configurations including 2-piece front rotors, 1-piece optional design full cast front rotors, and aluminum hat front rotor setups on the CTS, making it a fitment-focused solution for specific brake package variations. The part number 4502-47083 is designed to support consistent stopping performance, quieter operation, and a cleaner installation process on vehicles such as the Chevrolet Camaro and Cadillac CTS.
DFC’s GEOSPEC rotor line uses a coated finish to resist rust better than conventional paint or zinc-style coatings, while the machined surface and non-directional finish help promote even pad contact. The included 5000 Advanced pads are formulated for stable friction behavior and are assembled with premium shims to help reduce brake noise.
What It Helps Address
- Rear brake wear, scoring, or rotor thickness variation
- Brake noise caused by worn pads or uneven rotor surfaces
- Rust buildup on exposed rotor hats and edges
- Longer pedal travel from degraded rear brake components
- Uneven braking feel during routine brake service
Installation Notes and Tips
Fits 2010-2015 Chevrolet Camaro, rear. Fits 2022 Chevrolet Camaro, rear. Fits 2009-2015 Cadillac CTS, rear. Fits 2016-2019 Cadillac CTS, rear. Confirm the front brake configuration listed in the fitment notes before ordering, since CTS applications vary by rotor design. The rotors are shipped dry and ready to install, which helps reduce prep time during brake service. Follow proper brake bedding procedures after installation for consistent pad transfer and braking feel.
Quality Assurance
Each rotor is machined to tight tolerances, checked for critical dimensions, and inspected for balance where applicable before release. DFC states that every rotor carries a 12-month warranty against defects in material and workmanship.
Original: $244.27
-65%$244.27
$85.49Description
Rear Brake Kit for Camaro and CTS
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit combines coated rear rotors and matched friction material for service on select Chevrolet Camaro and Cadillac CTS applications. Part number 4502-47083 is built for drivers replacing worn rear brake components with an OE-style disc brake kit.
Key Features
- DFC GEOSPEC coated brake rotors with a silver-gray corrosion-resistant finish
- Dry, ready-to-install rotor surface with no oil cleaning required before installation
- G3000/G11H18 cast iron rotor construction for OE-spec durability and stability
- Non-directional rotor finish for more even pad bed-in and smoother braking
- 100% inspected rotors with balance correction on vented designs
- DFC 5000 Advanced Brake Pads with post-cured friction material
- Scorched pads to reduce initial break-in time and improve first-stop response
- Rubber-steel-rubber shims for improved noise, vibration, and harshness control
Product Details
This DFC brake service kit is engineered for rear axle replacement on 2010-2015 Chevrolet Camaro, rear; 2022 Chevrolet Camaro, rear; and select Cadillac CTS rear applications from 2009-2019. It is also listed for configurations including 2-piece front rotors, 1-piece optional design full cast front rotors, and aluminum hat front rotor setups on the CTS, making it a fitment-focused solution for specific brake package variations. The part number 4502-47083 is designed to support consistent stopping performance, quieter operation, and a cleaner installation process on vehicles such as the Chevrolet Camaro and Cadillac CTS.
DFC’s GEOSPEC rotor line uses a coated finish to resist rust better than conventional paint or zinc-style coatings, while the machined surface and non-directional finish help promote even pad contact. The included 5000 Advanced pads are formulated for stable friction behavior and are assembled with premium shims to help reduce brake noise.
What It Helps Address
- Rear brake wear, scoring, or rotor thickness variation
- Brake noise caused by worn pads or uneven rotor surfaces
- Rust buildup on exposed rotor hats and edges
- Longer pedal travel from degraded rear brake components
- Uneven braking feel during routine brake service
Installation Notes and Tips
Fits 2010-2015 Chevrolet Camaro, rear. Fits 2022 Chevrolet Camaro, rear. Fits 2009-2015 Cadillac CTS, rear. Fits 2016-2019 Cadillac CTS, rear. Confirm the front brake configuration listed in the fitment notes before ordering, since CTS applications vary by rotor design. The rotors are shipped dry and ready to install, which helps reduce prep time during brake service. Follow proper brake bedding procedures after installation for consistent pad transfer and braking feel.
Quality Assurance
Each rotor is machined to tight tolerances, checked for critical dimensions, and inspected for balance where applicable before release. DFC states that every rotor carries a 12-month warranty against defects in material and workmanship.
