Dynamite Friction 4502-47035 Disc Brake Kit - Front or Rear
Brake Kit for Corvette and Camaro
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit combines coated replacement rotors with matched friction material for select Chevrolet applications. Part number 4502-47035 is built for rear service on classic Corvette models and for front or rear service on 1968-1969 Camaro models equipped with 4 wheel disc brakes.
Key Features
- Complete disc brake kit with DFC GEOSPEC coated rotors and 5000 Advanced brake pads
- Fits 1963-1966 Chevrolet Corvette, rear
- Fits 1967-1982 Chevrolet Corvette, rear
- Fits 1968-1969 Chevrolet Camaro, front
- Fits 1968-1969 Chevrolet Camaro, rear
- Dry-coated rotors arrive ready to install without oil removal
- Non-directional rotor finish supports even pad bed-in and quieter stops
- Brake pads are post-cured, scorched, and fitted with rubber-steel-rubber shims
- Part number 4502-47035
Product Details
DFC GEOSPEC rotors use a silver-gray corrosion-resistant coating and OE-style cast iron construction to match factory durability and stability targets. The rotors are machined to tight tolerances, finished with a non-directional surface, and inspected for balance and critical dimensions. The 5000 Advanced pads are post-cured for stable friction performance, scorched to reduce initial break-in, and assembled with premium shims to help control noise, vibration, and harshness. This makes the kit a practical choice for a Chevrolet Corvette rear brake refresh or a Camaro disc brake service where consistent pedal feel and clean rotor finish matter. Part number 4502-47035 is also a useful reference when sourcing the correct DFC brake kit for these classic GM platforms.
What This Kit Helps Address
- Brake noise during everyday driving
- Uneven pad bedding after rotor replacement
- Rust buildup on exposed rotor surfaces
- Longer installation time caused by oil-coated rotors
- Brake service needs on worn Corvette or Camaro disc brake components
Installation Notes and Tips
Compatible With 1963-1966 Chevrolet Corvette, rear; 1967-1982 Chevrolet Corvette, rear; 1968-1969 Chevrolet Camaro, front; and 1968-1969 Chevrolet Camaro, rear with 4 wheel disc brakes. Verify axle position and brake configuration before ordering. The rotors are shipped dry and ready to install, which helps reduce prep time during service. Follow proper brake bedding procedures after installation to help the pads and rotors seat evenly.
Quality Assurance
DFC rotors are 100% inspected after machining, including balance checks on vented rotors and final verification of critical dimensions against OE specifications. Each rotor includes a 12-month warranty against defects in material and workmanship.
Brake Kit for Corvette and Camaro
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit combines coated replacement rotors with matched friction material for select Chevrolet applications. Part number 4502-47035 is built for rear service on classic Corvette models and for front or rear service on 1968-1969 Camaro models equipped with 4 wheel disc brakes.
Key Features
- Complete disc brake kit with DFC GEOSPEC coated rotors and 5000 Advanced brake pads
- Fits 1963-1966 Chevrolet Corvette, rear
- Fits 1967-1982 Chevrolet Corvette, rear
- Fits 1968-1969 Chevrolet Camaro, front
- Fits 1968-1969 Chevrolet Camaro, rear
- Dry-coated rotors arrive ready to install without oil removal
- Non-directional rotor finish supports even pad bed-in and quieter stops
- Brake pads are post-cured, scorched, and fitted with rubber-steel-rubber shims
- Part number 4502-47035
Product Details
DFC GEOSPEC rotors use a silver-gray corrosion-resistant coating and OE-style cast iron construction to match factory durability and stability targets. The rotors are machined to tight tolerances, finished with a non-directional surface, and inspected for balance and critical dimensions. The 5000 Advanced pads are post-cured for stable friction performance, scorched to reduce initial break-in, and assembled with premium shims to help control noise, vibration, and harshness. This makes the kit a practical choice for a Chevrolet Corvette rear brake refresh or a Camaro disc brake service where consistent pedal feel and clean rotor finish matter. Part number 4502-47035 is also a useful reference when sourcing the correct DFC brake kit for these classic GM platforms.
What This Kit Helps Address
- Brake noise during everyday driving
- Uneven pad bedding after rotor replacement
- Rust buildup on exposed rotor surfaces
- Longer installation time caused by oil-coated rotors
- Brake service needs on worn Corvette or Camaro disc brake components
Installation Notes and Tips
Compatible With 1963-1966 Chevrolet Corvette, rear; 1967-1982 Chevrolet Corvette, rear; 1968-1969 Chevrolet Camaro, front; and 1968-1969 Chevrolet Camaro, rear with 4 wheel disc brakes. Verify axle position and brake configuration before ordering. The rotors are shipped dry and ready to install, which helps reduce prep time during service. Follow proper brake bedding procedures after installation to help the pads and rotors seat evenly.
Quality Assurance
DFC rotors are 100% inspected after machining, including balance checks on vented rotors and final verification of critical dimensions against OE specifications. Each rotor includes a 12-month warranty against defects in material and workmanship.
Original: $204.52
-65%$204.52
$71.58Description
Brake Kit for Corvette and Camaro
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit combines coated replacement rotors with matched friction material for select Chevrolet applications. Part number 4502-47035 is built for rear service on classic Corvette models and for front or rear service on 1968-1969 Camaro models equipped with 4 wheel disc brakes.
Key Features
- Complete disc brake kit with DFC GEOSPEC coated rotors and 5000 Advanced brake pads
- Fits 1963-1966 Chevrolet Corvette, rear
- Fits 1967-1982 Chevrolet Corvette, rear
- Fits 1968-1969 Chevrolet Camaro, front
- Fits 1968-1969 Chevrolet Camaro, rear
- Dry-coated rotors arrive ready to install without oil removal
- Non-directional rotor finish supports even pad bed-in and quieter stops
- Brake pads are post-cured, scorched, and fitted with rubber-steel-rubber shims
- Part number 4502-47035
Product Details
DFC GEOSPEC rotors use a silver-gray corrosion-resistant coating and OE-style cast iron construction to match factory durability and stability targets. The rotors are machined to tight tolerances, finished with a non-directional surface, and inspected for balance and critical dimensions. The 5000 Advanced pads are post-cured for stable friction performance, scorched to reduce initial break-in, and assembled with premium shims to help control noise, vibration, and harshness. This makes the kit a practical choice for a Chevrolet Corvette rear brake refresh or a Camaro disc brake service where consistent pedal feel and clean rotor finish matter. Part number 4502-47035 is also a useful reference when sourcing the correct DFC brake kit for these classic GM platforms.
What This Kit Helps Address
- Brake noise during everyday driving
- Uneven pad bedding after rotor replacement
- Rust buildup on exposed rotor surfaces
- Longer installation time caused by oil-coated rotors
- Brake service needs on worn Corvette or Camaro disc brake components
Installation Notes and Tips
Compatible With 1963-1966 Chevrolet Corvette, rear; 1967-1982 Chevrolet Corvette, rear; 1968-1969 Chevrolet Camaro, front; and 1968-1969 Chevrolet Camaro, rear with 4 wheel disc brakes. Verify axle position and brake configuration before ordering. The rotors are shipped dry and ready to install, which helps reduce prep time during service. Follow proper brake bedding procedures after installation to help the pads and rotors seat evenly.
Quality Assurance
DFC rotors are 100% inspected after machining, including balance checks on vented rotors and final verification of critical dimensions against OE specifications. Each rotor includes a 12-month warranty against defects in material and workmanship.
