HomeStore

Dynamite Friction 4502-42055 Disc Brake Kit - Rear

Product image 1

Dynamite Friction 4502-42055 Disc Brake Kit - Rear

Rear Brake Kit for Durango and Grand Cherokee

The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit is a rear disc brake service kit built for select Dodge Durango and Jeep Grand Cherokee applications. Part number 4502-42055 combines coated rotors with matched friction material for OE-style service on the rear axle.

Key Features

  • DFC GEOSPEC coated brake rotors with a silver-gray corrosion-resistant finish
  • Dry-processed rotors arrive ready to install, with no oil coating to clean off
  • G3000/G11H18 cast iron rotor construction engineered to OE specifications
  • Non-directional rotor finish supports even pad bed-in and smoother braking
  • 100% inspected rotors with balance correction on vented designs
  • DFC 5000 Advanced Brake Pads are post-cured and scorched for stable friction performance
  • Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
  • Part number 4502-42055 for rear brake service on select Jeep and Dodge platforms

Product Details

DFC’s GEOSPEC rotor line is built for drivers who want corrosion protection and OE-level fit and finish in a brake service kit. The coated surface helps resist rust better than conventional paint or zinc-style coatings, while the dry packaging saves prep time during installation. The rotors are machined to tight tolerances and finished for consistent contact with the pad surface.

The included DFC 5000 Advanced Brake Pads are formulated for stable braking performance and reduced break-in time. This brake kit is a practical choice for rear brake replacement on the Dodge Durango and Jeep Grand Cherokee, especially when you want a complete rotor-and-pad solution under one part number, 4502-42055.

Used For

  • Rear brake rotor and pad replacement
  • Brake noise caused by worn pads or uneven rotor surfaces
  • Rust buildup on exposed rotor hats and edges
  • Pulsation or vibration from rotor wear
  • Restoring braking performance on high-mileage rear axles

Installation Notes

Fits 2022 Dodge Durango, rear. Fits 2021 Dodge Durango, rear. Fits 2018-2020 Dodge Durango, rear. Fits 2021 Jeep Grand Cherokee, rear. Fits 2014-2020 Jeep Grand Cherokee, rear. Fits 2014-2016 Jeep Grand Cherokee, rear. Fits 2012-2013 Jeep Grand Cherokee, rear. Verify rotor configuration notes for the vehicle before installation, including front-rotor type references listed in the fitment data. Part number 4502-42055 is intended for rear axle service only.

Quality Assurance

Each DFC GEOSPEC rotor is 100% inspected after machining to confirm critical dimensions and OE-spec requirements. Vented rotors are balance-checked and corrected when needed. Rotors include a 12-month warranty against defects in material and workmanship.

Rear Brake Kit for Durango and Grand Cherokee

The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit is a rear disc brake service kit built for select Dodge Durango and Jeep Grand Cherokee applications. Part number 4502-42055 combines coated rotors with matched friction material for OE-style service on the rear axle.

Key Features

  • DFC GEOSPEC coated brake rotors with a silver-gray corrosion-resistant finish
  • Dry-processed rotors arrive ready to install, with no oil coating to clean off
  • G3000/G11H18 cast iron rotor construction engineered to OE specifications
  • Non-directional rotor finish supports even pad bed-in and smoother braking
  • 100% inspected rotors with balance correction on vented designs
  • DFC 5000 Advanced Brake Pads are post-cured and scorched for stable friction performance
  • Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
  • Part number 4502-42055 for rear brake service on select Jeep and Dodge platforms

Product Details

DFC’s GEOSPEC rotor line is built for drivers who want corrosion protection and OE-level fit and finish in a brake service kit. The coated surface helps resist rust better than conventional paint or zinc-style coatings, while the dry packaging saves prep time during installation. The rotors are machined to tight tolerances and finished for consistent contact with the pad surface.

The included DFC 5000 Advanced Brake Pads are formulated for stable braking performance and reduced break-in time. This brake kit is a practical choice for rear brake replacement on the Dodge Durango and Jeep Grand Cherokee, especially when you want a complete rotor-and-pad solution under one part number, 4502-42055.

Used For

  • Rear brake rotor and pad replacement
  • Brake noise caused by worn pads or uneven rotor surfaces
  • Rust buildup on exposed rotor hats and edges
  • Pulsation or vibration from rotor wear
  • Restoring braking performance on high-mileage rear axles

Installation Notes

Fits 2022 Dodge Durango, rear. Fits 2021 Dodge Durango, rear. Fits 2018-2020 Dodge Durango, rear. Fits 2021 Jeep Grand Cherokee, rear. Fits 2014-2020 Jeep Grand Cherokee, rear. Fits 2014-2016 Jeep Grand Cherokee, rear. Fits 2012-2013 Jeep Grand Cherokee, rear. Verify rotor configuration notes for the vehicle before installation, including front-rotor type references listed in the fitment data. Part number 4502-42055 is intended for rear axle service only.

Quality Assurance

Each DFC GEOSPEC rotor is 100% inspected after machining to confirm critical dimensions and OE-spec requirements. Vented rotors are balance-checked and corrected when needed. Rotors include a 12-month warranty against defects in material and workmanship.

$87.13

Original: $248.93

-65%
Dynamite Friction 4502-42055 Disc Brake Kit - Rear

$248.93

$87.13

Description

Rear Brake Kit for Durango and Grand Cherokee

The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit is a rear disc brake service kit built for select Dodge Durango and Jeep Grand Cherokee applications. Part number 4502-42055 combines coated rotors with matched friction material for OE-style service on the rear axle.

Key Features

  • DFC GEOSPEC coated brake rotors with a silver-gray corrosion-resistant finish
  • Dry-processed rotors arrive ready to install, with no oil coating to clean off
  • G3000/G11H18 cast iron rotor construction engineered to OE specifications
  • Non-directional rotor finish supports even pad bed-in and smoother braking
  • 100% inspected rotors with balance correction on vented designs
  • DFC 5000 Advanced Brake Pads are post-cured and scorched for stable friction performance
  • Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
  • Part number 4502-42055 for rear brake service on select Jeep and Dodge platforms

Product Details

DFC’s GEOSPEC rotor line is built for drivers who want corrosion protection and OE-level fit and finish in a brake service kit. The coated surface helps resist rust better than conventional paint or zinc-style coatings, while the dry packaging saves prep time during installation. The rotors are machined to tight tolerances and finished for consistent contact with the pad surface.

The included DFC 5000 Advanced Brake Pads are formulated for stable braking performance and reduced break-in time. This brake kit is a practical choice for rear brake replacement on the Dodge Durango and Jeep Grand Cherokee, especially when you want a complete rotor-and-pad solution under one part number, 4502-42055.

Used For

  • Rear brake rotor and pad replacement
  • Brake noise caused by worn pads or uneven rotor surfaces
  • Rust buildup on exposed rotor hats and edges
  • Pulsation or vibration from rotor wear
  • Restoring braking performance on high-mileage rear axles

Installation Notes

Fits 2022 Dodge Durango, rear. Fits 2021 Dodge Durango, rear. Fits 2018-2020 Dodge Durango, rear. Fits 2021 Jeep Grand Cherokee, rear. Fits 2014-2020 Jeep Grand Cherokee, rear. Fits 2014-2016 Jeep Grand Cherokee, rear. Fits 2012-2013 Jeep Grand Cherokee, rear. Verify rotor configuration notes for the vehicle before installation, including front-rotor type references listed in the fitment data. Part number 4502-42055 is intended for rear axle service only.

Quality Assurance

Each DFC GEOSPEC rotor is 100% inspected after machining to confirm critical dimensions and OE-spec requirements. Vented rotors are balance-checked and corrected when needed. Rotors include a 12-month warranty against defects in material and workmanship.