Dynamite Friction 4502-32010 Disc Brake Kit - Rear
Rear Brake Kit for Mini Cooper
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads is a rear disc brake kit built for 2002-2008 Mini Cooper applications. Part number 4502-32010 combines coated rotors and matched pads in one package for a direct service replacement on the rear axle.
Key Features
- Rear disc brake kit with rotors and pads for Mini Cooper service
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Rotors are processed dry and ready to install
- Non-directional rotor finish supports even pad bed-in and quieter stops
- 5000 Advanced pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Part number 4502-32010 for rear brake service on select Mini Cooper models
Product Details
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads line is built around OE-style brake service requirements. The rotors use G3000/G11H18 cast iron and are machined to tight tolerances, then finished with a non-directional surface to promote consistent pad contact. The coated rotor surface helps resist rust better than conventional paint or zinc finishes, while the dry-ready design eliminates the need to clean oil from the rotor before installation. The 5000 Advanced pads are formulated for stable friction, reduced break-in time, and improved noise control. This rear kit is a practical choice for Mini Cooper owners looking for a complete brake service package. Part number 4502-32010 is listed for rear applications on 2002-2008 Mini Cooper, including 2002-2006 Mini Cooper John Cooper Works Brake Kit applications.
Vehicle Fitment
- Fits 2007-2008 Mini Cooper, rear.
- Fits 2002-2006 Mini Cooper, rear.
- Fits 2002-2006 Mini Cooper, rear. John Cooper Works Brake Kit; DFC GEOSPEC Rotors with 5000 Advanced Brake Pads.
Common Reasons to Replace
- Brake pulsation or rotor wear at the rear axle
- Reduced stopping performance from worn pads
- Brake noise during light or moderate braking
- Visible rotor corrosion or uneven pad transfer
- Need for a complete rear brake refresh on a Mini Cooper
Installation Notes
Install on the rear axle only. Verify rotor size, caliper condition, and pad shape against the vehicle before service. The coated rotor surface is normal and will wear away in the pad sweep area during initial use. Follow standard brake bedding procedures after installation to help establish even pad transfer and consistent pedal feel.
Quality Assurance
Each DFC GEOSPEC rotor is 100% inspected for critical dimensions and balance, with vented rotors corrected as needed during electronic mill-balancing. The rotors are engineered to meet OE specifications and include a 12-month warranty against defects in material and workmanship.
Rear Brake Kit for Mini Cooper
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads is a rear disc brake kit built for 2002-2008 Mini Cooper applications. Part number 4502-32010 combines coated rotors and matched pads in one package for a direct service replacement on the rear axle.
Key Features
- Rear disc brake kit with rotors and pads for Mini Cooper service
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Rotors are processed dry and ready to install
- Non-directional rotor finish supports even pad bed-in and quieter stops
- 5000 Advanced pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Part number 4502-32010 for rear brake service on select Mini Cooper models
Product Details
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads line is built around OE-style brake service requirements. The rotors use G3000/G11H18 cast iron and are machined to tight tolerances, then finished with a non-directional surface to promote consistent pad contact. The coated rotor surface helps resist rust better than conventional paint or zinc finishes, while the dry-ready design eliminates the need to clean oil from the rotor before installation. The 5000 Advanced pads are formulated for stable friction, reduced break-in time, and improved noise control. This rear kit is a practical choice for Mini Cooper owners looking for a complete brake service package. Part number 4502-32010 is listed for rear applications on 2002-2008 Mini Cooper, including 2002-2006 Mini Cooper John Cooper Works Brake Kit applications.
Vehicle Fitment
- Fits 2007-2008 Mini Cooper, rear.
- Fits 2002-2006 Mini Cooper, rear.
- Fits 2002-2006 Mini Cooper, rear. John Cooper Works Brake Kit; DFC GEOSPEC Rotors with 5000 Advanced Brake Pads.
Common Reasons to Replace
- Brake pulsation or rotor wear at the rear axle
- Reduced stopping performance from worn pads
- Brake noise during light or moderate braking
- Visible rotor corrosion or uneven pad transfer
- Need for a complete rear brake refresh on a Mini Cooper
Installation Notes
Install on the rear axle only. Verify rotor size, caliper condition, and pad shape against the vehicle before service. The coated rotor surface is normal and will wear away in the pad sweep area during initial use. Follow standard brake bedding procedures after installation to help establish even pad transfer and consistent pedal feel.
Quality Assurance
Each DFC GEOSPEC rotor is 100% inspected for critical dimensions and balance, with vented rotors corrected as needed during electronic mill-balancing. The rotors are engineered to meet OE specifications and include a 12-month warranty against defects in material and workmanship.
Original: $150.53
-65%$150.53
$52.69Description
Rear Brake Kit for Mini Cooper
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads is a rear disc brake kit built for 2002-2008 Mini Cooper applications. Part number 4502-32010 combines coated rotors and matched pads in one package for a direct service replacement on the rear axle.
Key Features
- Rear disc brake kit with rotors and pads for Mini Cooper service
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Rotors are processed dry and ready to install
- Non-directional rotor finish supports even pad bed-in and quieter stops
- 5000 Advanced pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Part number 4502-32010 for rear brake service on select Mini Cooper models
Product Details
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads line is built around OE-style brake service requirements. The rotors use G3000/G11H18 cast iron and are machined to tight tolerances, then finished with a non-directional surface to promote consistent pad contact. The coated rotor surface helps resist rust better than conventional paint or zinc finishes, while the dry-ready design eliminates the need to clean oil from the rotor before installation. The 5000 Advanced pads are formulated for stable friction, reduced break-in time, and improved noise control. This rear kit is a practical choice for Mini Cooper owners looking for a complete brake service package. Part number 4502-32010 is listed for rear applications on 2002-2008 Mini Cooper, including 2002-2006 Mini Cooper John Cooper Works Brake Kit applications.
Vehicle Fitment
- Fits 2007-2008 Mini Cooper, rear.
- Fits 2002-2006 Mini Cooper, rear.
- Fits 2002-2006 Mini Cooper, rear. John Cooper Works Brake Kit; DFC GEOSPEC Rotors with 5000 Advanced Brake Pads.
Common Reasons to Replace
- Brake pulsation or rotor wear at the rear axle
- Reduced stopping performance from worn pads
- Brake noise during light or moderate braking
- Visible rotor corrosion or uneven pad transfer
- Need for a complete rear brake refresh on a Mini Cooper
Installation Notes
Install on the rear axle only. Verify rotor size, caliper condition, and pad shape against the vehicle before service. The coated rotor surface is normal and will wear away in the pad sweep area during initial use. Follow standard brake bedding procedures after installation to help establish even pad transfer and consistent pedal feel.
Quality Assurance
Each DFC GEOSPEC rotor is 100% inspected for critical dimensions and balance, with vented rotors corrected as needed during electronic mill-balancing. The rotors are engineered to meet OE specifications and include a 12-month warranty against defects in material and workmanship.
