Dynamite Friction 4502-21042 Disc Brake Kit - Rear
Rear Brake Kit for Kia Rondo
Upgrade the rear braking system on your 2007-2012 Kia Rondo with the DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit. Part number 4502-21042 combines coated rear rotors and matched pads in one service kit for a direct brake refresh on the rear axle.
Compatible With 2007-2012 Kia Rondo, rear. This kit is built for drivers looking for an OE-style brake service package with corrosion-resistant rotors and pads formulated for stable friction performance.
Key Features
- Complete rear disc brake kit with rotors and pads
- DFC GEOSPEC coated rotors with a silver-gray anti-rust finish
- Dry-processed rotors arrive ready to install
- Non-directional rotor finish supports even pad bed-in and quieter stops
- 5000 Advanced pads are post-cured and scorched for consistent initial performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- OE-matched cast iron rotor specification for durability and stability
- Part number 4502-21042
Product Details
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads package is engineered as a rear service solution for the Kia Rondo. The rotors use a coated finish to resist corrosion better than conventional paint or zinc-style coatings, while the machining process focuses on tight tolerances, balance, and a smooth braking surface. The pads are formulated for stable friction, with post-curing and scorching used to reduce break-in time and improve stopping response from the first stop. Part number 4502-21042 is a practical choice for a rear brake job on the 2007-2012 Kia Rondo when both rotor and pad replacement are needed.
Common Brake Issues This Kit Can Address
- Rear brake pulsation from worn or uneven rotors
- Brake noise caused by aged pads or rotor surface wear
- Rust buildup on exposed rear rotors
- Reduced braking consistency from depleted friction material
- Longer stopping distances due to worn rear brake components
Installation Notes
Fits 2007-2012 Kia Rondo, rear. Before installation, confirm rotor size and rear brake configuration against the vehicle’s existing components. Clean the hub mounting surface, inspect caliper hardware and slide points, and follow the vehicle manufacturer’s torque specifications during assembly. After installation, perform a controlled bed-in procedure to help the pads and rotors establish an even transfer layer.
Quality Assurance
DFC GEOSPEC rotors are manufactured to OE specifications, inspected for critical dimensions, and checked for balance on vented applications. Each rotor includes a 12-month warranty against defects in material and workmanship. Part number 4502-21042 is backed by DFC’s brake component engineering and inspection process for the Kia Rondo rear axle application.
Rear Brake Kit for Kia Rondo
Upgrade the rear braking system on your 2007-2012 Kia Rondo with the DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit. Part number 4502-21042 combines coated rear rotors and matched pads in one service kit for a direct brake refresh on the rear axle.
Compatible With 2007-2012 Kia Rondo, rear. This kit is built for drivers looking for an OE-style brake service package with corrosion-resistant rotors and pads formulated for stable friction performance.
Key Features
- Complete rear disc brake kit with rotors and pads
- DFC GEOSPEC coated rotors with a silver-gray anti-rust finish
- Dry-processed rotors arrive ready to install
- Non-directional rotor finish supports even pad bed-in and quieter stops
- 5000 Advanced pads are post-cured and scorched for consistent initial performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- OE-matched cast iron rotor specification for durability and stability
- Part number 4502-21042
Product Details
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads package is engineered as a rear service solution for the Kia Rondo. The rotors use a coated finish to resist corrosion better than conventional paint or zinc-style coatings, while the machining process focuses on tight tolerances, balance, and a smooth braking surface. The pads are formulated for stable friction, with post-curing and scorching used to reduce break-in time and improve stopping response from the first stop. Part number 4502-21042 is a practical choice for a rear brake job on the 2007-2012 Kia Rondo when both rotor and pad replacement are needed.
Common Brake Issues This Kit Can Address
- Rear brake pulsation from worn or uneven rotors
- Brake noise caused by aged pads or rotor surface wear
- Rust buildup on exposed rear rotors
- Reduced braking consistency from depleted friction material
- Longer stopping distances due to worn rear brake components
Installation Notes
Fits 2007-2012 Kia Rondo, rear. Before installation, confirm rotor size and rear brake configuration against the vehicle’s existing components. Clean the hub mounting surface, inspect caliper hardware and slide points, and follow the vehicle manufacturer’s torque specifications during assembly. After installation, perform a controlled bed-in procedure to help the pads and rotors establish an even transfer layer.
Quality Assurance
DFC GEOSPEC rotors are manufactured to OE specifications, inspected for critical dimensions, and checked for balance on vented applications. Each rotor includes a 12-month warranty against defects in material and workmanship. Part number 4502-21042 is backed by DFC’s brake component engineering and inspection process for the Kia Rondo rear axle application.
Description
Rear Brake Kit for Kia Rondo
Upgrade the rear braking system on your 2007-2012 Kia Rondo with the DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit. Part number 4502-21042 combines coated rear rotors and matched pads in one service kit for a direct brake refresh on the rear axle.
Compatible With 2007-2012 Kia Rondo, rear. This kit is built for drivers looking for an OE-style brake service package with corrosion-resistant rotors and pads formulated for stable friction performance.
Key Features
- Complete rear disc brake kit with rotors and pads
- DFC GEOSPEC coated rotors with a silver-gray anti-rust finish
- Dry-processed rotors arrive ready to install
- Non-directional rotor finish supports even pad bed-in and quieter stops
- 5000 Advanced pads are post-cured and scorched for consistent initial performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- OE-matched cast iron rotor specification for durability and stability
- Part number 4502-21042
Product Details
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads package is engineered as a rear service solution for the Kia Rondo. The rotors use a coated finish to resist corrosion better than conventional paint or zinc-style coatings, while the machining process focuses on tight tolerances, balance, and a smooth braking surface. The pads are formulated for stable friction, with post-curing and scorching used to reduce break-in time and improve stopping response from the first stop. Part number 4502-21042 is a practical choice for a rear brake job on the 2007-2012 Kia Rondo when both rotor and pad replacement are needed.
Common Brake Issues This Kit Can Address
- Rear brake pulsation from worn or uneven rotors
- Brake noise caused by aged pads or rotor surface wear
- Rust buildup on exposed rear rotors
- Reduced braking consistency from depleted friction material
- Longer stopping distances due to worn rear brake components
Installation Notes
Fits 2007-2012 Kia Rondo, rear. Before installation, confirm rotor size and rear brake configuration against the vehicle’s existing components. Clean the hub mounting surface, inspect caliper hardware and slide points, and follow the vehicle manufacturer’s torque specifications during assembly. After installation, perform a controlled bed-in procedure to help the pads and rotors establish an even transfer layer.
Quality Assurance
DFC GEOSPEC rotors are manufactured to OE specifications, inspected for critical dimensions, and checked for balance on vented applications. Each rotor includes a 12-month warranty against defects in material and workmanship. Part number 4502-21042 is backed by DFC’s brake component engineering and inspection process for the Kia Rondo rear axle application.
