Dynamite Friction 4502-13044 Disc Brake Kit - Rear
Rear Brake Kit for Subaru Forester and Impreza
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit is a rear disc brake service kit built for select Subaru applications. Part number 4502-13044 combines coated rotors and matched brake pads for a complete rear brake refresh on 1998-2003 Subaru Forester and 1998-2003 Subaru Impreza models with the listed production-date exceptions.
Key Features
- Complete rear disc brake kit with rotors and pads
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Rotors are processed dry and ready to install
- G3000/G11H18 cast iron rotor specification for OE-style durability and stability
- Non-directional rotor finish for more even pad bed-in and smoother braking
- 5000 Advanced Brake Pads are post-cured and scorched for stable friction performance and reduced break-in time
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Part number 4502-13044
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are engineered as a matched rear brake solution for Subaru Forester and Subaru Impreza rear axle service. The coated rotors resist rust better than conventional painted or zinc-coated finishes, while the dry-packaged design eliminates the need to clean oil from the rotor before installation. The pads are formulated for consistent friction, then post-cured and scorched to support immediate stopping response and a shorter bedding process. This kit is a practical choice when servicing a rear brake job on a 1998-2003 Subaru Forester or a 1998-2003 Subaru Impreza, including the specified 2002-2003 production-date variants. Part number 4502-13044 identifies this rear brake kit for the listed applications.
What This Brake Kit Helps Address
- Rear brake pulsation from worn or uneven rotors
- Reduced stopping performance from worn pads
- Brake noise caused by aged pad material or hardware wear patterns
- Rust buildup on exposed rotor surfaces
- Longer service time from rotors that require extra prep before installation
Installation Notes
Verify rear axle fitment against the vehicle production date before ordering, especially for 2002-2003 Subaru Impreza applications with date-specific notes. Inspect calipers, slides, and brake fluid condition during service, and follow the vehicle manufacturer’s bedding procedure after installation. This kit is intended for rear brake service only.
Quality Assurance
Each DFC GEOSPEC rotor is machined to tight tolerances, finished with a non-directional surface, and 100% inspected for critical dimensions and balance on vented designs. Rotors include a 12-month warranty against defects in material and workmanship.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Compatible With
- Fits 1998-2003 Subaru Forester, rear
- Fits 1998-2001 Subaru Impreza, rear
- Fits 1998 Subaru Impreza, rear, vehicle production date from 7/98
- Fits 2002 Subaru Impreza, rear, vehicle production date to 5/02
- Fits 2002 Subaru Impreza, rear, vehicle production date to 9/02
- Fits 2003 Subaru Impreza, rear, vehicle production date from 4/02 to 8/02
- Fits 2003 Subaru Impreza, rear, vehicle production date from 10/02 to 12/02
Rear Brake Kit for Subaru Forester and Impreza
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit is a rear disc brake service kit built for select Subaru applications. Part number 4502-13044 combines coated rotors and matched brake pads for a complete rear brake refresh on 1998-2003 Subaru Forester and 1998-2003 Subaru Impreza models with the listed production-date exceptions.
Key Features
- Complete rear disc brake kit with rotors and pads
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Rotors are processed dry and ready to install
- G3000/G11H18 cast iron rotor specification for OE-style durability and stability
- Non-directional rotor finish for more even pad bed-in and smoother braking
- 5000 Advanced Brake Pads are post-cured and scorched for stable friction performance and reduced break-in time
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Part number 4502-13044
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are engineered as a matched rear brake solution for Subaru Forester and Subaru Impreza rear axle service. The coated rotors resist rust better than conventional painted or zinc-coated finishes, while the dry-packaged design eliminates the need to clean oil from the rotor before installation. The pads are formulated for consistent friction, then post-cured and scorched to support immediate stopping response and a shorter bedding process. This kit is a practical choice when servicing a rear brake job on a 1998-2003 Subaru Forester or a 1998-2003 Subaru Impreza, including the specified 2002-2003 production-date variants. Part number 4502-13044 identifies this rear brake kit for the listed applications.
What This Brake Kit Helps Address
- Rear brake pulsation from worn or uneven rotors
- Reduced stopping performance from worn pads
- Brake noise caused by aged pad material or hardware wear patterns
- Rust buildup on exposed rotor surfaces
- Longer service time from rotors that require extra prep before installation
Installation Notes
Verify rear axle fitment against the vehicle production date before ordering, especially for 2002-2003 Subaru Impreza applications with date-specific notes. Inspect calipers, slides, and brake fluid condition during service, and follow the vehicle manufacturer’s bedding procedure after installation. This kit is intended for rear brake service only.
Quality Assurance
Each DFC GEOSPEC rotor is machined to tight tolerances, finished with a non-directional surface, and 100% inspected for critical dimensions and balance on vented designs. Rotors include a 12-month warranty against defects in material and workmanship.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Compatible With
- Fits 1998-2003 Subaru Forester, rear
- Fits 1998-2001 Subaru Impreza, rear
- Fits 1998 Subaru Impreza, rear, vehicle production date from 7/98
- Fits 2002 Subaru Impreza, rear, vehicle production date to 5/02
- Fits 2002 Subaru Impreza, rear, vehicle production date to 9/02
- Fits 2003 Subaru Impreza, rear, vehicle production date from 4/02 to 8/02
- Fits 2003 Subaru Impreza, rear, vehicle production date from 10/02 to 12/02
Original: $124.11
-65%$124.11
$43.44Description
Rear Brake Kit for Subaru Forester and Impreza
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit is a rear disc brake service kit built for select Subaru applications. Part number 4502-13044 combines coated rotors and matched brake pads for a complete rear brake refresh on 1998-2003 Subaru Forester and 1998-2003 Subaru Impreza models with the listed production-date exceptions.
Key Features
- Complete rear disc brake kit with rotors and pads
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Rotors are processed dry and ready to install
- G3000/G11H18 cast iron rotor specification for OE-style durability and stability
- Non-directional rotor finish for more even pad bed-in and smoother braking
- 5000 Advanced Brake Pads are post-cured and scorched for stable friction performance and reduced break-in time
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Part number 4502-13044
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are engineered as a matched rear brake solution for Subaru Forester and Subaru Impreza rear axle service. The coated rotors resist rust better than conventional painted or zinc-coated finishes, while the dry-packaged design eliminates the need to clean oil from the rotor before installation. The pads are formulated for consistent friction, then post-cured and scorched to support immediate stopping response and a shorter bedding process. This kit is a practical choice when servicing a rear brake job on a 1998-2003 Subaru Forester or a 1998-2003 Subaru Impreza, including the specified 2002-2003 production-date variants. Part number 4502-13044 identifies this rear brake kit for the listed applications.
What This Brake Kit Helps Address
- Rear brake pulsation from worn or uneven rotors
- Reduced stopping performance from worn pads
- Brake noise caused by aged pad material or hardware wear patterns
- Rust buildup on exposed rotor surfaces
- Longer service time from rotors that require extra prep before installation
Installation Notes
Verify rear axle fitment against the vehicle production date before ordering, especially for 2002-2003 Subaru Impreza applications with date-specific notes. Inspect calipers, slides, and brake fluid condition during service, and follow the vehicle manufacturer’s bedding procedure after installation. This kit is intended for rear brake service only.
Quality Assurance
Each DFC GEOSPEC rotor is machined to tight tolerances, finished with a non-directional surface, and 100% inspected for critical dimensions and balance on vented designs. Rotors include a 12-month warranty against defects in material and workmanship.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Compatible With
- Fits 1998-2003 Subaru Forester, rear
- Fits 1998-2001 Subaru Impreza, rear
- Fits 1998 Subaru Impreza, rear, vehicle production date from 7/98
- Fits 2002 Subaru Impreza, rear, vehicle production date to 5/02
- Fits 2002 Subaru Impreza, rear, vehicle production date to 9/02
- Fits 2003 Subaru Impreza, rear, vehicle production date from 4/02 to 8/02
- Fits 2003 Subaru Impreza, rear, vehicle production date from 10/02 to 12/02
