Dynamite Friction 4502-13043 Disc Brake Kit - Rear
Rear Brake Kit for Subaru Legacy and Impreza
Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads, part number 4502-13043, is a rear disc brake kit built for specific Subaru applications. It combines coated rotors and matched pads in one package for a straightforward brake service on select Subaru Legacy and Subaru Impreza models.
Key Features
- Rear disc brake kit with rotors and pads
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Rotors are processed dry and ready to install
- G3000/G11H18 cast iron rotor specification for OE-style durability and stability
- Non-directional rotor finish for more even pad bed-in and smoother braking
- DFC 5000 Advanced pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Part number 4502-13043
Product Line Details
The DFC GEOSPEC rotor line focuses on corrosion protection and installation efficiency. The coated surface helps resist rust better than conventional paint or zinc finishes, while the dry packaging means the rotors can go on without extra cleaning or prep. The 5000 Advanced pad line is formulated for consistent friction, with post-curing and scorching steps that reduce initial break-in demands and support predictable pedal response.
Detailed Description
This rear brake kit is engineered for drivers servicing a 1990-1999 Subaru Legacy rear brake system, as well as 1993-1996 Subaru Impreza rear brakes and 1998 Subaru Impreza rear brakes with production date to 6/98. The kit is built around OE-spec rotor machining, balance inspection on vented rotors, and a non-directional finish that supports quieter stops and more even pad contact. If you are searching for a rear brake kit for Subaru Legacy rear brakes or a Subaru Impreza rear disc brake kit, part number 4502-13043 brings the major wear components together in one matched package.
What It Helps Address
- Rear brake pulsation from worn or uneven rotors
- Rust buildup on exposed rotor surfaces
- Brake noise caused by aged pads and worn shims
- Reduced stopping performance from worn friction material
- Longer service time when sourcing pads and rotors separately
Installation Notes and Tips
Confirm rear axle fitment before ordering, especially on 1998 Subaru Impreza models built through 6/98. Inspect calipers, slides, and parking brake components during service, and follow the vehicle manufacturer’s bedding procedure after installation. The rotors are shipped dry and ready to install, so no oil removal step is required before assembly.
Quality Assurance
Each rotor is machined to tight tolerances, inspected for critical dimensions, and checked for balance where applicable. DFC states that every rotor meets OE specifications and includes a 12-month warranty against defects in material and workmanship. Part number 4502-13043 is built to deliver a complete rear brake service for Subaru Legacy and Subaru Impreza applications.
Rear Brake Kit for Subaru Legacy and Impreza
Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads, part number 4502-13043, is a rear disc brake kit built for specific Subaru applications. It combines coated rotors and matched pads in one package for a straightforward brake service on select Subaru Legacy and Subaru Impreza models.
Key Features
- Rear disc brake kit with rotors and pads
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Rotors are processed dry and ready to install
- G3000/G11H18 cast iron rotor specification for OE-style durability and stability
- Non-directional rotor finish for more even pad bed-in and smoother braking
- DFC 5000 Advanced pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Part number 4502-13043
Product Line Details
The DFC GEOSPEC rotor line focuses on corrosion protection and installation efficiency. The coated surface helps resist rust better than conventional paint or zinc finishes, while the dry packaging means the rotors can go on without extra cleaning or prep. The 5000 Advanced pad line is formulated for consistent friction, with post-curing and scorching steps that reduce initial break-in demands and support predictable pedal response.
Detailed Description
This rear brake kit is engineered for drivers servicing a 1990-1999 Subaru Legacy rear brake system, as well as 1993-1996 Subaru Impreza rear brakes and 1998 Subaru Impreza rear brakes with production date to 6/98. The kit is built around OE-spec rotor machining, balance inspection on vented rotors, and a non-directional finish that supports quieter stops and more even pad contact. If you are searching for a rear brake kit for Subaru Legacy rear brakes or a Subaru Impreza rear disc brake kit, part number 4502-13043 brings the major wear components together in one matched package.
What It Helps Address
- Rear brake pulsation from worn or uneven rotors
- Rust buildup on exposed rotor surfaces
- Brake noise caused by aged pads and worn shims
- Reduced stopping performance from worn friction material
- Longer service time when sourcing pads and rotors separately
Installation Notes and Tips
Confirm rear axle fitment before ordering, especially on 1998 Subaru Impreza models built through 6/98. Inspect calipers, slides, and parking brake components during service, and follow the vehicle manufacturer’s bedding procedure after installation. The rotors are shipped dry and ready to install, so no oil removal step is required before assembly.
Quality Assurance
Each rotor is machined to tight tolerances, inspected for critical dimensions, and checked for balance where applicable. DFC states that every rotor meets OE specifications and includes a 12-month warranty against defects in material and workmanship. Part number 4502-13043 is built to deliver a complete rear brake service for Subaru Legacy and Subaru Impreza applications.
Original: $126.46
-65%$126.46
$44.26Description
Rear Brake Kit for Subaru Legacy and Impreza
Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads, part number 4502-13043, is a rear disc brake kit built for specific Subaru applications. It combines coated rotors and matched pads in one package for a straightforward brake service on select Subaru Legacy and Subaru Impreza models.
Key Features
- Rear disc brake kit with rotors and pads
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Rotors are processed dry and ready to install
- G3000/G11H18 cast iron rotor specification for OE-style durability and stability
- Non-directional rotor finish for more even pad bed-in and smoother braking
- DFC 5000 Advanced pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Part number 4502-13043
Product Line Details
The DFC GEOSPEC rotor line focuses on corrosion protection and installation efficiency. The coated surface helps resist rust better than conventional paint or zinc finishes, while the dry packaging means the rotors can go on without extra cleaning or prep. The 5000 Advanced pad line is formulated for consistent friction, with post-curing and scorching steps that reduce initial break-in demands and support predictable pedal response.
Detailed Description
This rear brake kit is engineered for drivers servicing a 1990-1999 Subaru Legacy rear brake system, as well as 1993-1996 Subaru Impreza rear brakes and 1998 Subaru Impreza rear brakes with production date to 6/98. The kit is built around OE-spec rotor machining, balance inspection on vented rotors, and a non-directional finish that supports quieter stops and more even pad contact. If you are searching for a rear brake kit for Subaru Legacy rear brakes or a Subaru Impreza rear disc brake kit, part number 4502-13043 brings the major wear components together in one matched package.
What It Helps Address
- Rear brake pulsation from worn or uneven rotors
- Rust buildup on exposed rotor surfaces
- Brake noise caused by aged pads and worn shims
- Reduced stopping performance from worn friction material
- Longer service time when sourcing pads and rotors separately
Installation Notes and Tips
Confirm rear axle fitment before ordering, especially on 1998 Subaru Impreza models built through 6/98. Inspect calipers, slides, and parking brake components during service, and follow the vehicle manufacturer’s bedding procedure after installation. The rotors are shipped dry and ready to install, so no oil removal step is required before assembly.
Quality Assurance
Each rotor is machined to tight tolerances, inspected for critical dimensions, and checked for balance where applicable. DFC states that every rotor meets OE specifications and includes a 12-month warranty against defects in material and workmanship. Part number 4502-13043 is built to deliver a complete rear brake service for Subaru Legacy and Subaru Impreza applications.
