Dynamite Friction 4502-11057 Disc Brake Kit - Front
Front Brake Kit for Range Rover and Range Rover Sport
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit is a front disc brake service kit built for OE-style replacement on select Land Rover applications. Part number 4502-11057 combines coated rotors and advanced friction pads for a complete front brake refresh.
Compatible With 2013-2017 Land Rover Range Rover, front, and 2010-2017 Land Rover Range Rover Sport, front with Brembo front calipers, excluding MHEV and PHEV hybrid models. If you are searching for a front brake kit for Land Rover Range Rover Sport Brembo calipers or a front brake rotor and pad set for Range Rover, this kit matches those applications.
Key Features
- Complete front disc brake kit with rotors and pads
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed, ready-to-install rotors with no oil cleaning required
- G3000/G11H18 cast iron rotor construction for OE-style durability and stability
- Non-directional rotor finish for more even pad bed-in and smoother braking
- 5000 Advanced Brake Pads are post-cured and scorched for consistent friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are engineered as a matched front brake service solution for the 2013-2017 Land Rover Range Rover and the 2010-2017 Land Rover Range Rover Sport with Brembo front calipers. The coated rotors are designed to resist rust better than conventional painted or zinc-coated rotors, while the pad compound is formulated for stable braking response and reduced break-in time. Part number 4502-11057 is a practical choice when replacing worn front brake components on these Land Rover platforms.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Problems This Kit Can Address
- Front brake pulsation from worn or uneven rotors
- Brake noise caused by aged pads or rotor surface wear
- Reduced stopping performance from thin or heat-affected brake components
- Visible rotor corrosion on exposed braking surfaces
- Longer pad bed-in after a front brake service
Installation Notes and Tips
Verify caliper type before ordering, especially on Range Rover Sport models, since this kit is for Brembo front calipers and excludes MHEV and PHEV hybrid configurations. Clean the hub mounting surface before installation and follow the vehicle manufacturer’s torque specifications. A proper brake inspection should include caliper condition, slide hardware, and brake fluid level before returning the vehicle to service.
Quality Assurance
DFC rotors are machined to tight tolerances, inspected for critical dimensions, and balanced where required. The rotors include a 12-month warranty against defects in material and workmanship. The 5000 Advanced Brake Pads are post-cured, scorched, and assembled with premium shims to support consistent performance and quieter operation.
Front Brake Kit for Range Rover and Range Rover Sport
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit is a front disc brake service kit built for OE-style replacement on select Land Rover applications. Part number 4502-11057 combines coated rotors and advanced friction pads for a complete front brake refresh.
Compatible With 2013-2017 Land Rover Range Rover, front, and 2010-2017 Land Rover Range Rover Sport, front with Brembo front calipers, excluding MHEV and PHEV hybrid models. If you are searching for a front brake kit for Land Rover Range Rover Sport Brembo calipers or a front brake rotor and pad set for Range Rover, this kit matches those applications.
Key Features
- Complete front disc brake kit with rotors and pads
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed, ready-to-install rotors with no oil cleaning required
- G3000/G11H18 cast iron rotor construction for OE-style durability and stability
- Non-directional rotor finish for more even pad bed-in and smoother braking
- 5000 Advanced Brake Pads are post-cured and scorched for consistent friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are engineered as a matched front brake service solution for the 2013-2017 Land Rover Range Rover and the 2010-2017 Land Rover Range Rover Sport with Brembo front calipers. The coated rotors are designed to resist rust better than conventional painted or zinc-coated rotors, while the pad compound is formulated for stable braking response and reduced break-in time. Part number 4502-11057 is a practical choice when replacing worn front brake components on these Land Rover platforms.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Problems This Kit Can Address
- Front brake pulsation from worn or uneven rotors
- Brake noise caused by aged pads or rotor surface wear
- Reduced stopping performance from thin or heat-affected brake components
- Visible rotor corrosion on exposed braking surfaces
- Longer pad bed-in after a front brake service
Installation Notes and Tips
Verify caliper type before ordering, especially on Range Rover Sport models, since this kit is for Brembo front calipers and excludes MHEV and PHEV hybrid configurations. Clean the hub mounting surface before installation and follow the vehicle manufacturer’s torque specifications. A proper brake inspection should include caliper condition, slide hardware, and brake fluid level before returning the vehicle to service.
Quality Assurance
DFC rotors are machined to tight tolerances, inspected for critical dimensions, and balanced where required. The rotors include a 12-month warranty against defects in material and workmanship. The 5000 Advanced Brake Pads are post-cured, scorched, and assembled with premium shims to support consistent performance and quieter operation.
Original: $345.97
-65%$345.97
$121.09Description
Front Brake Kit for Range Rover and Range Rover Sport
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit is a front disc brake service kit built for OE-style replacement on select Land Rover applications. Part number 4502-11057 combines coated rotors and advanced friction pads for a complete front brake refresh.
Compatible With 2013-2017 Land Rover Range Rover, front, and 2010-2017 Land Rover Range Rover Sport, front with Brembo front calipers, excluding MHEV and PHEV hybrid models. If you are searching for a front brake kit for Land Rover Range Rover Sport Brembo calipers or a front brake rotor and pad set for Range Rover, this kit matches those applications.
Key Features
- Complete front disc brake kit with rotors and pads
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed, ready-to-install rotors with no oil cleaning required
- G3000/G11H18 cast iron rotor construction for OE-style durability and stability
- Non-directional rotor finish for more even pad bed-in and smoother braking
- 5000 Advanced Brake Pads are post-cured and scorched for consistent friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are engineered as a matched front brake service solution for the 2013-2017 Land Rover Range Rover and the 2010-2017 Land Rover Range Rover Sport with Brembo front calipers. The coated rotors are designed to resist rust better than conventional painted or zinc-coated rotors, while the pad compound is formulated for stable braking response and reduced break-in time. Part number 4502-11057 is a practical choice when replacing worn front brake components on these Land Rover platforms.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Problems This Kit Can Address
- Front brake pulsation from worn or uneven rotors
- Brake noise caused by aged pads or rotor surface wear
- Reduced stopping performance from thin or heat-affected brake components
- Visible rotor corrosion on exposed braking surfaces
- Longer pad bed-in after a front brake service
Installation Notes and Tips
Verify caliper type before ordering, especially on Range Rover Sport models, since this kit is for Brembo front calipers and excludes MHEV and PHEV hybrid configurations. Clean the hub mounting surface before installation and follow the vehicle manufacturer’s torque specifications. A proper brake inspection should include caliper condition, slide hardware, and brake fluid level before returning the vehicle to service.
Quality Assurance
DFC rotors are machined to tight tolerances, inspected for critical dimensions, and balanced where required. The rotors include a 12-month warranty against defects in material and workmanship. The 5000 Advanced Brake Pads are post-cured, scorched, and assembled with premium shims to support consistent performance and quieter operation.
