Dynamite Friction 4502-07011 Disc Brake Kit - Rear
Rear Brake Kit for Fiat 500
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit is built for rear brake service on the 2013-2019 Fiat 500. This disc brake kit combines coated rotors and matched pads in one package for a direct rear brake replacement on the Fiat 500, part number 4502-07011.
Key Features
- Rear disc brake kit with rotors and pads
- Fits 2013-2019 Fiat 500, rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed, dry-shipped rotors ready for installation
- G3000/G11H18 cast iron rotor specification for OE-style durability and stability
- Non-directional rotor finish for more even pad bed-in and smoother braking
- DFC 5000 Advanced pads with post-cured friction material
- Scorched pads to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise and vibration control
- Part number 4502-07011 for easy ordering and catalog lookup
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are engineered as a complete rear brake service solution for the Fiat 500. The coated rotors are designed to resist rust better than conventional paint or zinc finishes, while the dry-ready surface helps reduce prep time during installation. Each rotor is machined to tight tolerances, finished non-directionally, and inspected for balance and critical dimensions to support OE-style fit and function. The 5000 Advanced pads are post cured, scorched, and assembled with premium shims to help deliver consistent friction and quieter operation. If you are searching for rear brake pads and rotors for a 2013-2019 Fiat 500, this kit provides the matched components needed for a complete service. Part number 4502-07011 is also useful when cross-checking the correct rear brake kit for the Fiat 500.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues This Kit Can Address
- Rear brake noise during stops
- Rotor rust and surface corrosion
- Uneven braking feel from worn pads and rotors
- Longer stopping distances caused by worn friction components
- Brake pulsation related to rotor wear or finish issues
Installation Notes and Tips
Before installation, confirm rear axle fitment for the 2013-2019 Fiat 500 and verify the part number 4502-07011 against your service requirements. The rotors are shipped dry and ready to install, so no oil removal is needed. For best results, clean the hub mounting surface, inspect caliper hardware and guide pins, and follow the vehicle manufacturer’s brake service procedure. After installation, perform a proper pad and rotor bed-in cycle to help establish even friction transfer.
Quality Assurance
DFC GEOSPEC rotors are manufactured to OE specifications, inspected for critical dimensions, and backed by a 12-month warranty against defects in material and workmanship. The 5000 Advanced pads are produced with post-cured friction material and premium shims to support stable braking performance and NVH control. Part number 4502-07011 is built for rear brake service on the Fiat 500 with attention to fit, finish, and consistency.
Rear Brake Kit for Fiat 500
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit is built for rear brake service on the 2013-2019 Fiat 500. This disc brake kit combines coated rotors and matched pads in one package for a direct rear brake replacement on the Fiat 500, part number 4502-07011.
Key Features
- Rear disc brake kit with rotors and pads
- Fits 2013-2019 Fiat 500, rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed, dry-shipped rotors ready for installation
- G3000/G11H18 cast iron rotor specification for OE-style durability and stability
- Non-directional rotor finish for more even pad bed-in and smoother braking
- DFC 5000 Advanced pads with post-cured friction material
- Scorched pads to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise and vibration control
- Part number 4502-07011 for easy ordering and catalog lookup
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are engineered as a complete rear brake service solution for the Fiat 500. The coated rotors are designed to resist rust better than conventional paint or zinc finishes, while the dry-ready surface helps reduce prep time during installation. Each rotor is machined to tight tolerances, finished non-directionally, and inspected for balance and critical dimensions to support OE-style fit and function. The 5000 Advanced pads are post cured, scorched, and assembled with premium shims to help deliver consistent friction and quieter operation. If you are searching for rear brake pads and rotors for a 2013-2019 Fiat 500, this kit provides the matched components needed for a complete service. Part number 4502-07011 is also useful when cross-checking the correct rear brake kit for the Fiat 500.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues This Kit Can Address
- Rear brake noise during stops
- Rotor rust and surface corrosion
- Uneven braking feel from worn pads and rotors
- Longer stopping distances caused by worn friction components
- Brake pulsation related to rotor wear or finish issues
Installation Notes and Tips
Before installation, confirm rear axle fitment for the 2013-2019 Fiat 500 and verify the part number 4502-07011 against your service requirements. The rotors are shipped dry and ready to install, so no oil removal is needed. For best results, clean the hub mounting surface, inspect caliper hardware and guide pins, and follow the vehicle manufacturer’s brake service procedure. After installation, perform a proper pad and rotor bed-in cycle to help establish even friction transfer.
Quality Assurance
DFC GEOSPEC rotors are manufactured to OE specifications, inspected for critical dimensions, and backed by a 12-month warranty against defects in material and workmanship. The 5000 Advanced pads are produced with post-cured friction material and premium shims to support stable braking performance and NVH control. Part number 4502-07011 is built for rear brake service on the Fiat 500 with attention to fit, finish, and consistency.
Original: $111.50
-65%$111.50
$39.02Description
Rear Brake Kit for Fiat 500
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit is built for rear brake service on the 2013-2019 Fiat 500. This disc brake kit combines coated rotors and matched pads in one package for a direct rear brake replacement on the Fiat 500, part number 4502-07011.
Key Features
- Rear disc brake kit with rotors and pads
- Fits 2013-2019 Fiat 500, rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed, dry-shipped rotors ready for installation
- G3000/G11H18 cast iron rotor specification for OE-style durability and stability
- Non-directional rotor finish for more even pad bed-in and smoother braking
- DFC 5000 Advanced pads with post-cured friction material
- Scorched pads to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise and vibration control
- Part number 4502-07011 for easy ordering and catalog lookup
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are engineered as a complete rear brake service solution for the Fiat 500. The coated rotors are designed to resist rust better than conventional paint or zinc finishes, while the dry-ready surface helps reduce prep time during installation. Each rotor is machined to tight tolerances, finished non-directionally, and inspected for balance and critical dimensions to support OE-style fit and function. The 5000 Advanced pads are post cured, scorched, and assembled with premium shims to help deliver consistent friction and quieter operation. If you are searching for rear brake pads and rotors for a 2013-2019 Fiat 500, this kit provides the matched components needed for a complete service. Part number 4502-07011 is also useful when cross-checking the correct rear brake kit for the Fiat 500.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues This Kit Can Address
- Rear brake noise during stops
- Rotor rust and surface corrosion
- Uneven braking feel from worn pads and rotors
- Longer stopping distances caused by worn friction components
- Brake pulsation related to rotor wear or finish issues
Installation Notes and Tips
Before installation, confirm rear axle fitment for the 2013-2019 Fiat 500 and verify the part number 4502-07011 against your service requirements. The rotors are shipped dry and ready to install, so no oil removal is needed. For best results, clean the hub mounting surface, inspect caliper hardware and guide pins, and follow the vehicle manufacturer’s brake service procedure. After installation, perform a proper pad and rotor bed-in cycle to help establish even friction transfer.
Quality Assurance
DFC GEOSPEC rotors are manufactured to OE specifications, inspected for critical dimensions, and backed by a 12-month warranty against defects in material and workmanship. The 5000 Advanced pads are produced with post-cured friction material and premium shims to support stable braking performance and NVH control. Part number 4502-07011 is built for rear brake service on the Fiat 500 with attention to fit, finish, and consistency.
