Dynamite Friction 4502-03178 Disc Brake Kit - Front
Front Brake Kit for Genesis G80
Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads, part number 4502-03178, is a front disc brake kit for 2018-2020 Genesis G80 models. It combines coated rotors and matched pads in one service kit for a direct brake replacement on the front axle.
Compatible with 2018, 2019, and 2020 Genesis G80 front brake service, this kit is built for drivers and technicians looking for a complete rotor-and-pad solution. The DFC GEOSPEC rotor finish helps resist corrosion, while the 5000 Advanced pads are formulated for stable friction and quieter operation.
Key Features
- Front disc brake kit for 2018-2020 Genesis G80
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced brake pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved NVH control
- Rotors machined to OE-style tolerances with a non-directional finish
- Part number 4502-03178
Product Details
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads line is built around matched braking components for front axle service. The rotors are cast to G3000/G11H18 specifications, processed dry, and ready to install without additional cleaning. Their coating is intended to help fight rust better than conventional paint or zinc finishes, while the non-directional surface supports even pad bed-in and smoother braking feel. The pads are post cured, scorched, and assembled with premium shims to help maintain consistent friction and reduce noise, vibration, and harshness.
This part number, 4502-03178, is a practical choice for Genesis G80 front brake maintenance when both rotors and pads need replacement at the same time.
Common Brake Issues This Kit Can Address
- Brake pulsation from worn or uneven front rotors
- Reduced stopping performance from worn pad material
- Brake noise caused by pad wear or surface irregularity
- Rust buildup on exposed rotor surfaces
- Longer service time from separate rotor and pad sourcing
Installation Notes
Fits 2018-2020 Genesis G80, front. Verify rotor size, caliper clearance, and vehicle build details before installation. Clean the hub mounting surface, inspect caliper hardware and slide pins, and follow proper bedding procedures after installation to help the pads and rotors seat evenly. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Quality Assurance
Each rotor is inspected for critical dimensions and balance, with vented rotors corrected as needed during the mill-balance process. DFC states that every rotor is checked against OE specifications, and the rotors include a 12-month warranty against defects in material and workmanship.
Front Brake Kit for Genesis G80
Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads, part number 4502-03178, is a front disc brake kit for 2018-2020 Genesis G80 models. It combines coated rotors and matched pads in one service kit for a direct brake replacement on the front axle.
Compatible with 2018, 2019, and 2020 Genesis G80 front brake service, this kit is built for drivers and technicians looking for a complete rotor-and-pad solution. The DFC GEOSPEC rotor finish helps resist corrosion, while the 5000 Advanced pads are formulated for stable friction and quieter operation.
Key Features
- Front disc brake kit for 2018-2020 Genesis G80
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced brake pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved NVH control
- Rotors machined to OE-style tolerances with a non-directional finish
- Part number 4502-03178
Product Details
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads line is built around matched braking components for front axle service. The rotors are cast to G3000/G11H18 specifications, processed dry, and ready to install without additional cleaning. Their coating is intended to help fight rust better than conventional paint or zinc finishes, while the non-directional surface supports even pad bed-in and smoother braking feel. The pads are post cured, scorched, and assembled with premium shims to help maintain consistent friction and reduce noise, vibration, and harshness.
This part number, 4502-03178, is a practical choice for Genesis G80 front brake maintenance when both rotors and pads need replacement at the same time.
Common Brake Issues This Kit Can Address
- Brake pulsation from worn or uneven front rotors
- Reduced stopping performance from worn pad material
- Brake noise caused by pad wear or surface irregularity
- Rust buildup on exposed rotor surfaces
- Longer service time from separate rotor and pad sourcing
Installation Notes
Fits 2018-2020 Genesis G80, front. Verify rotor size, caliper clearance, and vehicle build details before installation. Clean the hub mounting surface, inspect caliper hardware and slide pins, and follow proper bedding procedures after installation to help the pads and rotors seat evenly. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Quality Assurance
Each rotor is inspected for critical dimensions and balance, with vented rotors corrected as needed during the mill-balance process. DFC states that every rotor is checked against OE specifications, and the rotors include a 12-month warranty against defects in material and workmanship.
Original: $288.12
-65%$288.12
$100.84Description
Front Brake Kit for Genesis G80
Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads, part number 4502-03178, is a front disc brake kit for 2018-2020 Genesis G80 models. It combines coated rotors and matched pads in one service kit for a direct brake replacement on the front axle.
Compatible with 2018, 2019, and 2020 Genesis G80 front brake service, this kit is built for drivers and technicians looking for a complete rotor-and-pad solution. The DFC GEOSPEC rotor finish helps resist corrosion, while the 5000 Advanced pads are formulated for stable friction and quieter operation.
Key Features
- Front disc brake kit for 2018-2020 Genesis G80
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced brake pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved NVH control
- Rotors machined to OE-style tolerances with a non-directional finish
- Part number 4502-03178
Product Details
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads line is built around matched braking components for front axle service. The rotors are cast to G3000/G11H18 specifications, processed dry, and ready to install without additional cleaning. Their coating is intended to help fight rust better than conventional paint or zinc finishes, while the non-directional surface supports even pad bed-in and smoother braking feel. The pads are post cured, scorched, and assembled with premium shims to help maintain consistent friction and reduce noise, vibration, and harshness.
This part number, 4502-03178, is a practical choice for Genesis G80 front brake maintenance when both rotors and pads need replacement at the same time.
Common Brake Issues This Kit Can Address
- Brake pulsation from worn or uneven front rotors
- Reduced stopping performance from worn pad material
- Brake noise caused by pad wear or surface irregularity
- Rust buildup on exposed rotor surfaces
- Longer service time from separate rotor and pad sourcing
Installation Notes
Fits 2018-2020 Genesis G80, front. Verify rotor size, caliper clearance, and vehicle build details before installation. Clean the hub mounting surface, inspect caliper hardware and slide pins, and follow proper bedding procedures after installation to help the pads and rotors seat evenly. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Quality Assurance
Each rotor is inspected for critical dimensions and balance, with vented rotors corrected as needed during the mill-balance process. DFC states that every rotor is checked against OE specifications, and the rotors include a 12-month warranty against defects in material and workmanship.
