Dynamite Friction 4502-03154 Disc Brake Kit - Rear
Rear Brake Kit for Kia Sportage and Hyundai Tucson
Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads, part number 4502-03154, is a rear disc brake kit built for select Kia Sportage and Hyundai Tucson applications. It combines coated rotors and advanced friction pads in one service kit for a straightforward rear brake replacement.
Key Features
- Rear disc brake kit with DFC GEOSPEC coated rotors and 5000 Advanced brake pads
- Coated rotor finish helps resist rust and keeps the rotor ready to install dry
- OE-style G3000/G11H18 cast iron rotor construction for durability and stability
- Non-directional rotor finish supports even pad bed-in and smoother braking
- 100% inspected rotors with balance correction on vented applications
- Post-cured pads with scorched surfaces for stable friction and reduced break-in time
- Rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Part number 4502-03154 for easy identification
Product Details
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads line is built as a complete brake service solution for drivers who want matched rear rotors and pads in one package. The coated rotor surface is designed to fight corrosion better than conventional paint or zinc finishes, while the dry, ready-to-install format helps reduce prep time during brake service. The pad set uses DFC’s advanced friction formulation with post-curing and scorching steps to promote consistent stopping performance from the first stop.
Compatible With 2005-2010 Kia Sportage, rear; 2005-2009 Hyundai Tucson, rear; 2001-2002 Hyundai Santa Fe, rear; 2003-2005 Hyundai Santa Fe, rear with 294mm front rotors; 2003-2005 Hyundai Santa Fe, rear with 276mm front rotors; and 2006 Hyundai Santa Fe, rear. This part number 4502-03154 is a direct match for the listed rear applications.
Common Brake Issues This Kit Can Address
- Rear brake noise during stops
- Rust buildup on exposed rotor surfaces
- Uneven braking feel from worn rotors and pads
- Reduced stopping performance from aged friction material
- Brake vibration related to rotor wear or finish condition
Installation Notes and Tips
Install on the rear axle only for the listed applications. The rotors are shipped dry and do not require oil removal before installation. Clean the hub mounting surface before fitting the new rotors, and follow standard brake service procedures for pad bedding after installation. Verify the vehicle’s front rotor configuration on 2003-2005 Hyundai Santa Fe models, since fitment depends on whether the vehicle uses 294mm or 276mm front rotors.
Quality Assurance
Each DFC GEOSPEC rotor is machined to tight tolerances, checked for critical dimensions, and inspected for balance where applicable. The rotors carry a 12-month warranty against defects in material and workmanship.
Rear Brake Kit for Kia Sportage and Hyundai Tucson
Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads, part number 4502-03154, is a rear disc brake kit built for select Kia Sportage and Hyundai Tucson applications. It combines coated rotors and advanced friction pads in one service kit for a straightforward rear brake replacement.
Key Features
- Rear disc brake kit with DFC GEOSPEC coated rotors and 5000 Advanced brake pads
- Coated rotor finish helps resist rust and keeps the rotor ready to install dry
- OE-style G3000/G11H18 cast iron rotor construction for durability and stability
- Non-directional rotor finish supports even pad bed-in and smoother braking
- 100% inspected rotors with balance correction on vented applications
- Post-cured pads with scorched surfaces for stable friction and reduced break-in time
- Rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Part number 4502-03154 for easy identification
Product Details
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads line is built as a complete brake service solution for drivers who want matched rear rotors and pads in one package. The coated rotor surface is designed to fight corrosion better than conventional paint or zinc finishes, while the dry, ready-to-install format helps reduce prep time during brake service. The pad set uses DFC’s advanced friction formulation with post-curing and scorching steps to promote consistent stopping performance from the first stop.
Compatible With 2005-2010 Kia Sportage, rear; 2005-2009 Hyundai Tucson, rear; 2001-2002 Hyundai Santa Fe, rear; 2003-2005 Hyundai Santa Fe, rear with 294mm front rotors; 2003-2005 Hyundai Santa Fe, rear with 276mm front rotors; and 2006 Hyundai Santa Fe, rear. This part number 4502-03154 is a direct match for the listed rear applications.
Common Brake Issues This Kit Can Address
- Rear brake noise during stops
- Rust buildup on exposed rotor surfaces
- Uneven braking feel from worn rotors and pads
- Reduced stopping performance from aged friction material
- Brake vibration related to rotor wear or finish condition
Installation Notes and Tips
Install on the rear axle only for the listed applications. The rotors are shipped dry and do not require oil removal before installation. Clean the hub mounting surface before fitting the new rotors, and follow standard brake service procedures for pad bedding after installation. Verify the vehicle’s front rotor configuration on 2003-2005 Hyundai Santa Fe models, since fitment depends on whether the vehicle uses 294mm or 276mm front rotors.
Quality Assurance
Each DFC GEOSPEC rotor is machined to tight tolerances, checked for critical dimensions, and inspected for balance where applicable. The rotors carry a 12-month warranty against defects in material and workmanship.
Original: $135.58
-65%$135.58
$47.45Description
Rear Brake Kit for Kia Sportage and Hyundai Tucson
Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads, part number 4502-03154, is a rear disc brake kit built for select Kia Sportage and Hyundai Tucson applications. It combines coated rotors and advanced friction pads in one service kit for a straightforward rear brake replacement.
Key Features
- Rear disc brake kit with DFC GEOSPEC coated rotors and 5000 Advanced brake pads
- Coated rotor finish helps resist rust and keeps the rotor ready to install dry
- OE-style G3000/G11H18 cast iron rotor construction for durability and stability
- Non-directional rotor finish supports even pad bed-in and smoother braking
- 100% inspected rotors with balance correction on vented applications
- Post-cured pads with scorched surfaces for stable friction and reduced break-in time
- Rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Part number 4502-03154 for easy identification
Product Details
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads line is built as a complete brake service solution for drivers who want matched rear rotors and pads in one package. The coated rotor surface is designed to fight corrosion better than conventional paint or zinc finishes, while the dry, ready-to-install format helps reduce prep time during brake service. The pad set uses DFC’s advanced friction formulation with post-curing and scorching steps to promote consistent stopping performance from the first stop.
Compatible With 2005-2010 Kia Sportage, rear; 2005-2009 Hyundai Tucson, rear; 2001-2002 Hyundai Santa Fe, rear; 2003-2005 Hyundai Santa Fe, rear with 294mm front rotors; 2003-2005 Hyundai Santa Fe, rear with 276mm front rotors; and 2006 Hyundai Santa Fe, rear. This part number 4502-03154 is a direct match for the listed rear applications.
Common Brake Issues This Kit Can Address
- Rear brake noise during stops
- Rust buildup on exposed rotor surfaces
- Uneven braking feel from worn rotors and pads
- Reduced stopping performance from aged friction material
- Brake vibration related to rotor wear or finish condition
Installation Notes and Tips
Install on the rear axle only for the listed applications. The rotors are shipped dry and do not require oil removal before installation. Clean the hub mounting surface before fitting the new rotors, and follow standard brake service procedures for pad bedding after installation. Verify the vehicle’s front rotor configuration on 2003-2005 Hyundai Santa Fe models, since fitment depends on whether the vehicle uses 294mm or 276mm front rotors.
Quality Assurance
Each DFC GEOSPEC rotor is machined to tight tolerances, checked for critical dimensions, and inspected for balance where applicable. The rotors carry a 12-month warranty against defects in material and workmanship.
