Dynamite Friction 4314-54035 Disc Brake Kit - Front and Rear
Brake Kit for Ford F-150 and Mark LT
Dynamite Friction DFC GEOSPEC Coated Rotors with 3000 Ceramic Brake Pads and Hardware Kit, part number 4314-54035, is a complete disc brake kit for select Ford F-150 and Lincoln Mark LT applications. It combines coated rotors, ceramic pads, and brake hardware in one service package for front and rear brake maintenance.
Key Features
- DFC GEOSPEC coated rotors with a silver-gray protective finish to resist rust better than conventional paint or zinc coatings
- Dry-processed rotors arrive ready to install without oil removal or extra prep
- G3000/G11H18 cast iron rotor construction built to OE specifications for durability and stability
- Non-directional rotor finish supports faster pad bed-in and smoother, quieter braking
- DFC 3000 ceramic brake pads for low dust, fade resistance, and stable friction across a wide temperature range
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Brake hardware kit uses PTFE coating, vulcanized rubber, and stainless steel for OE-style fit and function
Product Details
The 4314-54035 brake kit is built for drivers servicing a 2004 Ford F-150 New Body Style, 2004 Ford F-150 Heritage New Body Style, 2005-2008 Ford F-150, or 2006-2008 Lincoln Mark LT with 6 lug wheels. It is also listed for front and rear service on these vehicles, including Ford F-150 applications that use drum brake hardware kits. The coated rotor design helps reduce corrosion during storage and after installation, while the ceramic pad formulation is aimed at consistent pedal feel and dependable stopping performance. This part number, 4314-54035, is a practical choice for a full brake refresh on Ford F-150 and Lincoln Mark LT trucks.
This part cross-references no listed aftermarket part numbers for the same application.
What It Helps Address
- Brake noise from worn pads or fatigued hardware
- Uneven braking caused by rotor wear or inconsistent pad contact
- Rust buildup on exposed rotor surfaces
- Excessive dust from older brake pad materials
- Reduced braking smoothness after extended service intervals
Installation Notes
Compatible With 2004 Ford F-150 New Body Style, front and rear; 2004 Ford F-150 Heritage New Body Style, front and rear; 2005-2008 Ford F-150, front and rear; and 2006-2008 Lincoln Mark LT, front and rear. Confirm 6 lug wheel configuration before ordering. The rotors are shipped dry and ready for installation, and the non-directional finish supports a quicker bed-in process with the supplied pads.
Quality Assurance
Each DFC GEOSPEC rotor is machined to tight tolerances, inspected for critical dimensions, and checked for balance on vented designs. The brake pads are post-cured, scorched, and assembled with premium shims for stable performance. Rotors include a 12-month warranty against defects in material and workmanship.
Brake Kit for Ford F-150 and Mark LT
Dynamite Friction DFC GEOSPEC Coated Rotors with 3000 Ceramic Brake Pads and Hardware Kit, part number 4314-54035, is a complete disc brake kit for select Ford F-150 and Lincoln Mark LT applications. It combines coated rotors, ceramic pads, and brake hardware in one service package for front and rear brake maintenance.
Key Features
- DFC GEOSPEC coated rotors with a silver-gray protective finish to resist rust better than conventional paint or zinc coatings
- Dry-processed rotors arrive ready to install without oil removal or extra prep
- G3000/G11H18 cast iron rotor construction built to OE specifications for durability and stability
- Non-directional rotor finish supports faster pad bed-in and smoother, quieter braking
- DFC 3000 ceramic brake pads for low dust, fade resistance, and stable friction across a wide temperature range
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Brake hardware kit uses PTFE coating, vulcanized rubber, and stainless steel for OE-style fit and function
Product Details
The 4314-54035 brake kit is built for drivers servicing a 2004 Ford F-150 New Body Style, 2004 Ford F-150 Heritage New Body Style, 2005-2008 Ford F-150, or 2006-2008 Lincoln Mark LT with 6 lug wheels. It is also listed for front and rear service on these vehicles, including Ford F-150 applications that use drum brake hardware kits. The coated rotor design helps reduce corrosion during storage and after installation, while the ceramic pad formulation is aimed at consistent pedal feel and dependable stopping performance. This part number, 4314-54035, is a practical choice for a full brake refresh on Ford F-150 and Lincoln Mark LT trucks.
This part cross-references no listed aftermarket part numbers for the same application.
What It Helps Address
- Brake noise from worn pads or fatigued hardware
- Uneven braking caused by rotor wear or inconsistent pad contact
- Rust buildup on exposed rotor surfaces
- Excessive dust from older brake pad materials
- Reduced braking smoothness after extended service intervals
Installation Notes
Compatible With 2004 Ford F-150 New Body Style, front and rear; 2004 Ford F-150 Heritage New Body Style, front and rear; 2005-2008 Ford F-150, front and rear; and 2006-2008 Lincoln Mark LT, front and rear. Confirm 6 lug wheel configuration before ordering. The rotors are shipped dry and ready for installation, and the non-directional finish supports a quicker bed-in process with the supplied pads.
Quality Assurance
Each DFC GEOSPEC rotor is machined to tight tolerances, inspected for critical dimensions, and checked for balance on vented designs. The brake pads are post-cured, scorched, and assembled with premium shims for stable performance. Rotors include a 12-month warranty against defects in material and workmanship.
Description
Brake Kit for Ford F-150 and Mark LT
Dynamite Friction DFC GEOSPEC Coated Rotors with 3000 Ceramic Brake Pads and Hardware Kit, part number 4314-54035, is a complete disc brake kit for select Ford F-150 and Lincoln Mark LT applications. It combines coated rotors, ceramic pads, and brake hardware in one service package for front and rear brake maintenance.
Key Features
- DFC GEOSPEC coated rotors with a silver-gray protective finish to resist rust better than conventional paint or zinc coatings
- Dry-processed rotors arrive ready to install without oil removal or extra prep
- G3000/G11H18 cast iron rotor construction built to OE specifications for durability and stability
- Non-directional rotor finish supports faster pad bed-in and smoother, quieter braking
- DFC 3000 ceramic brake pads for low dust, fade resistance, and stable friction across a wide temperature range
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Brake hardware kit uses PTFE coating, vulcanized rubber, and stainless steel for OE-style fit and function
Product Details
The 4314-54035 brake kit is built for drivers servicing a 2004 Ford F-150 New Body Style, 2004 Ford F-150 Heritage New Body Style, 2005-2008 Ford F-150, or 2006-2008 Lincoln Mark LT with 6 lug wheels. It is also listed for front and rear service on these vehicles, including Ford F-150 applications that use drum brake hardware kits. The coated rotor design helps reduce corrosion during storage and after installation, while the ceramic pad formulation is aimed at consistent pedal feel and dependable stopping performance. This part number, 4314-54035, is a practical choice for a full brake refresh on Ford F-150 and Lincoln Mark LT trucks.
This part cross-references no listed aftermarket part numbers for the same application.
What It Helps Address
- Brake noise from worn pads or fatigued hardware
- Uneven braking caused by rotor wear or inconsistent pad contact
- Rust buildup on exposed rotor surfaces
- Excessive dust from older brake pad materials
- Reduced braking smoothness after extended service intervals
Installation Notes
Compatible With 2004 Ford F-150 New Body Style, front and rear; 2004 Ford F-150 Heritage New Body Style, front and rear; 2005-2008 Ford F-150, front and rear; and 2006-2008 Lincoln Mark LT, front and rear. Confirm 6 lug wheel configuration before ordering. The rotors are shipped dry and ready for installation, and the non-directional finish supports a quicker bed-in process with the supplied pads.
Quality Assurance
Each DFC GEOSPEC rotor is machined to tight tolerances, inspected for critical dimensions, and checked for balance on vented designs. The brake pads are post-cured, scorched, and assembled with premium shims for stable performance. Rotors include a 12-month warranty against defects in material and workmanship.
