Dynamite Friction 4314-54034 Disc Brake Kit - Front and Rear
Brake Kit for Ford F-150 and Lincoln Mark LT
The Dynamite Friction DFC GEOSPEC Coated Rotors with 3000 Ceramic Brake Pads and Hardware Kit is a complete disc brake kit for front and rear service on select Ford and Lincoln trucks. Part number 4314-54034 combines coated rotors, ceramic pads, and brake hardware components in one package for a direct brake service on supported applications.
Key Features
- Fits 2005-2008 Ford F-150, front and rear, 6 lug wheels
- Fits 2006-2008 Lincoln Mark LT, front and rear, 6 lug wheels, Base Payload Package
- Fits 2004 Ford F-150, front and rear, 6 lug wheels
- Fits 2004 Ford F-150 Heritage, front and rear, 6 lug wheels
- DFC 3000 ceramic pads are post-cured and scorched for stable friction and reduced initial break-in
- Premium rubber-steel-rubber shims are used to improve noise, vibration, and harshness control
- GeoSpec coated rotors arrive dry and ready to install with corrosion-resistant silver-gray coating
- Non-directional rotor finish supports even pad bed-in and smoother braking
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel construction
Product Line Details
DFC GEOSPEC coated rotors are built for OE-style fit and finish, with a dry, ready-to-install coating that helps resist rust better than conventional paint or zinc finishes. The 3000 Ceramic Brake Pads line is formulated for passenger vehicles and light-duty trucks, with low dust characteristics and stable friction across a wide temperature range. Together, these components are designed for service work where consistent pedal feel and quieter operation matter.
Detailed Description
Part number 4314-54034 is a brake service kit for select Ford F-150, Ford F-150 Heritage, and Lincoln Mark LT applications. It combines DFC GEOSPEC coated rotors, DFC 3000 ceramic brake pads, and hardware kit components to support a complete front and rear brake refresh on the listed vehicles. The rotors are machined to tight tolerances, finished with a non-directional surface, and inspected for balance and critical dimensions. The pads are formulated for reliable stopping performance, fade resistance, and low dust output, while the hardware kit is engineered to restore proper spring tension and caliper movement.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What This Brake Kit Helps Address
- Brake noise from worn or fatigued hardware
- Uneven pad wear caused by corroded or weakened brake hardware
- Rust buildup on exposed rotor surfaces
- Reduced braking consistency from worn pads and rotors
- Excess brake dust from older friction material
Installation Notes and Tips
Compatible With 2005-2008 Ford F-150, front and rear; 2006-2008 Lincoln Mark LT, front and rear; 2004 Ford F-150, front and rear; and 2004 Ford F-150 Heritage, front and rear. Verify 6 lug wheel configuration before ordering. For 2005-2008 Ford F-150 and 2006-2008 Lincoln Mark LT applications, confirm bearing retainer nut 340-54503. For 2004 Ford F-150 and 2004 Ford F-150 Heritage applications, confirm bearing retainer nut 345-54003. The rotors are shipped dry and ready for installation, and the coating is removed naturally by the brake pads during normal use.
Quality Assurance
DFC GEOSPEC rotors are manufactured to OE specifications, inspected for balance and critical attributes, and backed by a 12-month warranty against defects in material and workmanship. The brake pads are post-cured for stable friction performance, and the hardware kit is built with corrosion-resistant materials for service durability.
Brake Kit for Ford F-150 and Lincoln Mark LT
The Dynamite Friction DFC GEOSPEC Coated Rotors with 3000 Ceramic Brake Pads and Hardware Kit is a complete disc brake kit for front and rear service on select Ford and Lincoln trucks. Part number 4314-54034 combines coated rotors, ceramic pads, and brake hardware components in one package for a direct brake service on supported applications.
Key Features
- Fits 2005-2008 Ford F-150, front and rear, 6 lug wheels
- Fits 2006-2008 Lincoln Mark LT, front and rear, 6 lug wheels, Base Payload Package
- Fits 2004 Ford F-150, front and rear, 6 lug wheels
- Fits 2004 Ford F-150 Heritage, front and rear, 6 lug wheels
- DFC 3000 ceramic pads are post-cured and scorched for stable friction and reduced initial break-in
- Premium rubber-steel-rubber shims are used to improve noise, vibration, and harshness control
- GeoSpec coated rotors arrive dry and ready to install with corrosion-resistant silver-gray coating
- Non-directional rotor finish supports even pad bed-in and smoother braking
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel construction
Product Line Details
DFC GEOSPEC coated rotors are built for OE-style fit and finish, with a dry, ready-to-install coating that helps resist rust better than conventional paint or zinc finishes. The 3000 Ceramic Brake Pads line is formulated for passenger vehicles and light-duty trucks, with low dust characteristics and stable friction across a wide temperature range. Together, these components are designed for service work where consistent pedal feel and quieter operation matter.
Detailed Description
Part number 4314-54034 is a brake service kit for select Ford F-150, Ford F-150 Heritage, and Lincoln Mark LT applications. It combines DFC GEOSPEC coated rotors, DFC 3000 ceramic brake pads, and hardware kit components to support a complete front and rear brake refresh on the listed vehicles. The rotors are machined to tight tolerances, finished with a non-directional surface, and inspected for balance and critical dimensions. The pads are formulated for reliable stopping performance, fade resistance, and low dust output, while the hardware kit is engineered to restore proper spring tension and caliper movement.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What This Brake Kit Helps Address
- Brake noise from worn or fatigued hardware
- Uneven pad wear caused by corroded or weakened brake hardware
- Rust buildup on exposed rotor surfaces
- Reduced braking consistency from worn pads and rotors
- Excess brake dust from older friction material
Installation Notes and Tips
Compatible With 2005-2008 Ford F-150, front and rear; 2006-2008 Lincoln Mark LT, front and rear; 2004 Ford F-150, front and rear; and 2004 Ford F-150 Heritage, front and rear. Verify 6 lug wheel configuration before ordering. For 2005-2008 Ford F-150 and 2006-2008 Lincoln Mark LT applications, confirm bearing retainer nut 340-54503. For 2004 Ford F-150 and 2004 Ford F-150 Heritage applications, confirm bearing retainer nut 345-54003. The rotors are shipped dry and ready for installation, and the coating is removed naturally by the brake pads during normal use.
Quality Assurance
DFC GEOSPEC rotors are manufactured to OE specifications, inspected for balance and critical attributes, and backed by a 12-month warranty against defects in material and workmanship. The brake pads are post-cured for stable friction performance, and the hardware kit is built with corrosion-resistant materials for service durability.
Description
Brake Kit for Ford F-150 and Lincoln Mark LT
The Dynamite Friction DFC GEOSPEC Coated Rotors with 3000 Ceramic Brake Pads and Hardware Kit is a complete disc brake kit for front and rear service on select Ford and Lincoln trucks. Part number 4314-54034 combines coated rotors, ceramic pads, and brake hardware components in one package for a direct brake service on supported applications.
Key Features
- Fits 2005-2008 Ford F-150, front and rear, 6 lug wheels
- Fits 2006-2008 Lincoln Mark LT, front and rear, 6 lug wheels, Base Payload Package
- Fits 2004 Ford F-150, front and rear, 6 lug wheels
- Fits 2004 Ford F-150 Heritage, front and rear, 6 lug wheels
- DFC 3000 ceramic pads are post-cured and scorched for stable friction and reduced initial break-in
- Premium rubber-steel-rubber shims are used to improve noise, vibration, and harshness control
- GeoSpec coated rotors arrive dry and ready to install with corrosion-resistant silver-gray coating
- Non-directional rotor finish supports even pad bed-in and smoother braking
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel construction
Product Line Details
DFC GEOSPEC coated rotors are built for OE-style fit and finish, with a dry, ready-to-install coating that helps resist rust better than conventional paint or zinc finishes. The 3000 Ceramic Brake Pads line is formulated for passenger vehicles and light-duty trucks, with low dust characteristics and stable friction across a wide temperature range. Together, these components are designed for service work where consistent pedal feel and quieter operation matter.
Detailed Description
Part number 4314-54034 is a brake service kit for select Ford F-150, Ford F-150 Heritage, and Lincoln Mark LT applications. It combines DFC GEOSPEC coated rotors, DFC 3000 ceramic brake pads, and hardware kit components to support a complete front and rear brake refresh on the listed vehicles. The rotors are machined to tight tolerances, finished with a non-directional surface, and inspected for balance and critical dimensions. The pads are formulated for reliable stopping performance, fade resistance, and low dust output, while the hardware kit is engineered to restore proper spring tension and caliper movement.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What This Brake Kit Helps Address
- Brake noise from worn or fatigued hardware
- Uneven pad wear caused by corroded or weakened brake hardware
- Rust buildup on exposed rotor surfaces
- Reduced braking consistency from worn pads and rotors
- Excess brake dust from older friction material
Installation Notes and Tips
Compatible With 2005-2008 Ford F-150, front and rear; 2006-2008 Lincoln Mark LT, front and rear; 2004 Ford F-150, front and rear; and 2004 Ford F-150 Heritage, front and rear. Verify 6 lug wheel configuration before ordering. For 2005-2008 Ford F-150 and 2006-2008 Lincoln Mark LT applications, confirm bearing retainer nut 340-54503. For 2004 Ford F-150 and 2004 Ford F-150 Heritage applications, confirm bearing retainer nut 345-54003. The rotors are shipped dry and ready for installation, and the coating is removed naturally by the brake pads during normal use.
Quality Assurance
DFC GEOSPEC rotors are manufactured to OE specifications, inspected for balance and critical attributes, and backed by a 12-month warranty against defects in material and workmanship. The brake pads are post-cured for stable friction performance, and the hardware kit is built with corrosion-resistant materials for service durability.
