Dynamite Friction 4312-59022 Disc Brake Kit - Rear
Rear Brake Kit for Acura ILX and Honda Accord
The Dynamite Friction DFC GEOSPEC Coated Rotors with 3000 Ceramic Brake Pads and Hardware Kit is a rear disc brake service kit built for select Acura ILX and Honda Accord applications. Part number 4312-59022 combines coated rotors, ceramic pads, and matching hardware components in one package for a complete rear brake refresh.
Key Features
- Rear disc brake kit for select 2005-2007 Honda Accord and 2016-2022 Acura ILX applications
- DFC 3000 ceramic brake pads for stable friction, low dust, and fade resistance
- Post-cured and scorched pad construction to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- GeoSpec coated rotors with a silver-gray finish that resists rust better than conventional paint or zinc coatings
- Dry-processed rotors arrive ready to install without oil removal
- Non-directional rotor finish supports even pad bed-in and smoother braking
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
Product Details
DFC GEOSPEC Coated Rotors with 3000 Ceramic Brake Pads and Hardware Kit, part number 4312-59022, is engineered for drivers who want a direct rear brake service solution with OE-style fitment and materials. The rotors are cast to G3000/G11H18 specifications, machined to tight tolerances, and inspected for balance and critical dimensions. The ceramic pads are formulated for passenger vehicles and light-duty trucks, with low-copper construction that meets current California and Washington requirements. This kit is a practical choice for rear brake service on the Acura ILX and Honda Accord when you want matched components from one source.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Rear brake noise from worn pads or fatigued hardware
- Uneven braking feel caused by rotor wear or corrosion
- Excessive brake dust buildup on wheels
- Reduced stopping consistency from heat-related fade
- Rust-related rotor appearance and surface deterioration
Installation Notes and Tips
Compatible With 2022 Acura ILX, rear; 2016-2021 Acura ILX, rear; and 2005-2007 Honda Accord, rear. For best results, clean the hub mounting surface before installation and follow a proper pad bed-in procedure after service. The rotors are shipped dry and ready to install, so no oil removal is required before assembly. Verify rear axle application and compare the existing brake hardware before beginning the job.
Quality Assurance
Each DFC rotor passes a 100% inspection process for critical dimensions and OE-spec compliance, and vented rotors are balance-checked and corrected when needed. The rotors include a 12-month warranty against defects in material and workmanship.
Rear Brake Kit for Acura ILX and Honda Accord
The Dynamite Friction DFC GEOSPEC Coated Rotors with 3000 Ceramic Brake Pads and Hardware Kit is a rear disc brake service kit built for select Acura ILX and Honda Accord applications. Part number 4312-59022 combines coated rotors, ceramic pads, and matching hardware components in one package for a complete rear brake refresh.
Key Features
- Rear disc brake kit for select 2005-2007 Honda Accord and 2016-2022 Acura ILX applications
- DFC 3000 ceramic brake pads for stable friction, low dust, and fade resistance
- Post-cured and scorched pad construction to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- GeoSpec coated rotors with a silver-gray finish that resists rust better than conventional paint or zinc coatings
- Dry-processed rotors arrive ready to install without oil removal
- Non-directional rotor finish supports even pad bed-in and smoother braking
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
Product Details
DFC GEOSPEC Coated Rotors with 3000 Ceramic Brake Pads and Hardware Kit, part number 4312-59022, is engineered for drivers who want a direct rear brake service solution with OE-style fitment and materials. The rotors are cast to G3000/G11H18 specifications, machined to tight tolerances, and inspected for balance and critical dimensions. The ceramic pads are formulated for passenger vehicles and light-duty trucks, with low-copper construction that meets current California and Washington requirements. This kit is a practical choice for rear brake service on the Acura ILX and Honda Accord when you want matched components from one source.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Rear brake noise from worn pads or fatigued hardware
- Uneven braking feel caused by rotor wear or corrosion
- Excessive brake dust buildup on wheels
- Reduced stopping consistency from heat-related fade
- Rust-related rotor appearance and surface deterioration
Installation Notes and Tips
Compatible With 2022 Acura ILX, rear; 2016-2021 Acura ILX, rear; and 2005-2007 Honda Accord, rear. For best results, clean the hub mounting surface before installation and follow a proper pad bed-in procedure after service. The rotors are shipped dry and ready to install, so no oil removal is required before assembly. Verify rear axle application and compare the existing brake hardware before beginning the job.
Quality Assurance
Each DFC rotor passes a 100% inspection process for critical dimensions and OE-spec compliance, and vented rotors are balance-checked and corrected when needed. The rotors include a 12-month warranty against defects in material and workmanship.
Description
Rear Brake Kit for Acura ILX and Honda Accord
The Dynamite Friction DFC GEOSPEC Coated Rotors with 3000 Ceramic Brake Pads and Hardware Kit is a rear disc brake service kit built for select Acura ILX and Honda Accord applications. Part number 4312-59022 combines coated rotors, ceramic pads, and matching hardware components in one package for a complete rear brake refresh.
Key Features
- Rear disc brake kit for select 2005-2007 Honda Accord and 2016-2022 Acura ILX applications
- DFC 3000 ceramic brake pads for stable friction, low dust, and fade resistance
- Post-cured and scorched pad construction to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- GeoSpec coated rotors with a silver-gray finish that resists rust better than conventional paint or zinc coatings
- Dry-processed rotors arrive ready to install without oil removal
- Non-directional rotor finish supports even pad bed-in and smoother braking
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
Product Details
DFC GEOSPEC Coated Rotors with 3000 Ceramic Brake Pads and Hardware Kit, part number 4312-59022, is engineered for drivers who want a direct rear brake service solution with OE-style fitment and materials. The rotors are cast to G3000/G11H18 specifications, machined to tight tolerances, and inspected for balance and critical dimensions. The ceramic pads are formulated for passenger vehicles and light-duty trucks, with low-copper construction that meets current California and Washington requirements. This kit is a practical choice for rear brake service on the Acura ILX and Honda Accord when you want matched components from one source.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Rear brake noise from worn pads or fatigued hardware
- Uneven braking feel caused by rotor wear or corrosion
- Excessive brake dust buildup on wheels
- Reduced stopping consistency from heat-related fade
- Rust-related rotor appearance and surface deterioration
Installation Notes and Tips
Compatible With 2022 Acura ILX, rear; 2016-2021 Acura ILX, rear; and 2005-2007 Honda Accord, rear. For best results, clean the hub mounting surface before installation and follow a proper pad bed-in procedure after service. The rotors are shipped dry and ready to install, so no oil removal is required before assembly. Verify rear axle application and compare the existing brake hardware before beginning the job.
Quality Assurance
Each DFC rotor passes a 100% inspection process for critical dimensions and OE-spec compliance, and vented rotors are balance-checked and corrected when needed. The rotors include a 12-month warranty against defects in material and workmanship.
