Dynamite Friction 4312-59018 Disc Brake Kit - Rear
Rear Brake Kit for 1998-2002 Honda Accord
Dynamite Friction DFC GEOSPEC Coated Rotors with 3000 Ceramic Brake Pads and Hardware Kit, part number 4312-59018, is a rear disc brake service kit for 1998-2002 Honda Accord models. It combines coated rotors, ceramic pads, and matching hardware components in one package for a complete rear brake refresh.
Key Features
- Fits 1998-2002 Honda Accord, rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- G3000/G11H18 cast iron rotor construction for OE-style durability and stability
- Non-directional rotor finish for more even pad bed-in and smoother braking
- DFC 3000 ceramic pads with low dust and stable friction across a wide temperature range
- Post-cured and scorched pad material to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel materials
Product Details
Part number 4312-59018 is built for drivers servicing the rear brakes on a Honda Accord from 1998 through 2002. The DFC GEOSPEC rotor coating is designed to resist rust and arrives dry, so the rotors are ready for installation without extra cleaning. The ceramic pad formulation is aimed at consistent stopping performance, reduced brake dust, and stable friction in everyday driving conditions. This rear brake kit is a practical choice for a Honda Accord rear brake job when you want matched components from the same product line.
The DFC GEOSPEC Coated Rotors with 3000 Ceramic Brake Pads and Hardware Kit line combines rotor protection, pad refinement, and service hardware in one brake package. For shoppers searching for a rear brake kit for 1998-2002 Honda Accord, rear disc brake pads and rotors, or Dynamite Friction 4312-59018, this kit provides the core parts needed for a rear brake service.
Common Problems This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Uneven rear braking caused by worn rotor surfaces
- Excess brake dust from older pad material
- Rust buildup on exposed rotor surfaces
- Reduced pedal feel from worn brake components
Installation Notes
Inspect calipers, slides, and mounting points before installation. Clean the hub face thoroughly so the new rotors seat flat, and follow proper torque procedures during reassembly. A normal brake service on each axle can take time, so having all major rear brake components together helps streamline the job on a 1998-2002 Honda Accord.
Quality Assurance
Each DFC GEOSPEC rotor is machined to tight tolerances, finished with a non-directional surface, and fully inspected for critical dimensions and balance where applicable. The rotors carry a 12-month warranty against defects in material and workmanship. DFC 3000 pads are post-cured, scorched, and assembled with premium shims to support stable performance and quieter operation.
Rear Brake Kit for 1998-2002 Honda Accord
Dynamite Friction DFC GEOSPEC Coated Rotors with 3000 Ceramic Brake Pads and Hardware Kit, part number 4312-59018, is a rear disc brake service kit for 1998-2002 Honda Accord models. It combines coated rotors, ceramic pads, and matching hardware components in one package for a complete rear brake refresh.
Key Features
- Fits 1998-2002 Honda Accord, rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- G3000/G11H18 cast iron rotor construction for OE-style durability and stability
- Non-directional rotor finish for more even pad bed-in and smoother braking
- DFC 3000 ceramic pads with low dust and stable friction across a wide temperature range
- Post-cured and scorched pad material to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel materials
Product Details
Part number 4312-59018 is built for drivers servicing the rear brakes on a Honda Accord from 1998 through 2002. The DFC GEOSPEC rotor coating is designed to resist rust and arrives dry, so the rotors are ready for installation without extra cleaning. The ceramic pad formulation is aimed at consistent stopping performance, reduced brake dust, and stable friction in everyday driving conditions. This rear brake kit is a practical choice for a Honda Accord rear brake job when you want matched components from the same product line.
The DFC GEOSPEC Coated Rotors with 3000 Ceramic Brake Pads and Hardware Kit line combines rotor protection, pad refinement, and service hardware in one brake package. For shoppers searching for a rear brake kit for 1998-2002 Honda Accord, rear disc brake pads and rotors, or Dynamite Friction 4312-59018, this kit provides the core parts needed for a rear brake service.
Common Problems This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Uneven rear braking caused by worn rotor surfaces
- Excess brake dust from older pad material
- Rust buildup on exposed rotor surfaces
- Reduced pedal feel from worn brake components
Installation Notes
Inspect calipers, slides, and mounting points before installation. Clean the hub face thoroughly so the new rotors seat flat, and follow proper torque procedures during reassembly. A normal brake service on each axle can take time, so having all major rear brake components together helps streamline the job on a 1998-2002 Honda Accord.
Quality Assurance
Each DFC GEOSPEC rotor is machined to tight tolerances, finished with a non-directional surface, and fully inspected for critical dimensions and balance where applicable. The rotors carry a 12-month warranty against defects in material and workmanship. DFC 3000 pads are post-cured, scorched, and assembled with premium shims to support stable performance and quieter operation.
Description
Rear Brake Kit for 1998-2002 Honda Accord
Dynamite Friction DFC GEOSPEC Coated Rotors with 3000 Ceramic Brake Pads and Hardware Kit, part number 4312-59018, is a rear disc brake service kit for 1998-2002 Honda Accord models. It combines coated rotors, ceramic pads, and matching hardware components in one package for a complete rear brake refresh.
Key Features
- Fits 1998-2002 Honda Accord, rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- G3000/G11H18 cast iron rotor construction for OE-style durability and stability
- Non-directional rotor finish for more even pad bed-in and smoother braking
- DFC 3000 ceramic pads with low dust and stable friction across a wide temperature range
- Post-cured and scorched pad material to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel materials
Product Details
Part number 4312-59018 is built for drivers servicing the rear brakes on a Honda Accord from 1998 through 2002. The DFC GEOSPEC rotor coating is designed to resist rust and arrives dry, so the rotors are ready for installation without extra cleaning. The ceramic pad formulation is aimed at consistent stopping performance, reduced brake dust, and stable friction in everyday driving conditions. This rear brake kit is a practical choice for a Honda Accord rear brake job when you want matched components from the same product line.
The DFC GEOSPEC Coated Rotors with 3000 Ceramic Brake Pads and Hardware Kit line combines rotor protection, pad refinement, and service hardware in one brake package. For shoppers searching for a rear brake kit for 1998-2002 Honda Accord, rear disc brake pads and rotors, or Dynamite Friction 4312-59018, this kit provides the core parts needed for a rear brake service.
Common Problems This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Uneven rear braking caused by worn rotor surfaces
- Excess brake dust from older pad material
- Rust buildup on exposed rotor surfaces
- Reduced pedal feel from worn brake components
Installation Notes
Inspect calipers, slides, and mounting points before installation. Clean the hub face thoroughly so the new rotors seat flat, and follow proper torque procedures during reassembly. A normal brake service on each axle can take time, so having all major rear brake components together helps streamline the job on a 1998-2002 Honda Accord.
Quality Assurance
Each DFC GEOSPEC rotor is machined to tight tolerances, finished with a non-directional surface, and fully inspected for critical dimensions and balance where applicable. The rotors carry a 12-month warranty against defects in material and workmanship. DFC 3000 pads are post-cured, scorched, and assembled with premium shims to support stable performance and quieter operation.
