Dynamite Friction 4312-59017 Disc Brake Kit - Rear
Rear Brake Kit for Civic, ILX, CSX, Prelude
The Dynamite Friction DFC GEOSPEC Coated Rotors with 3000 Ceramic Brake Pads and Hardware Kit, part number 4312-59017, is a rear disc brake service kit built for select Honda and Acura applications. It combines coated rotors, ceramic pads, and brake hardware components in one package for a complete rear brake refresh.
Key Features
- Rear disc brake kit with GEOSPEC coated rotors, 3000 ceramic pads, and hardware kit
- Fits 2013-2015 Acura ILX, rear
- Fits 2006-2015 Honda Civic, rear
- Fits 2006-2007 Acura CSX, rear
- Fits 1997-2001 Honda Prelude, rear
- DFC 3000 ceramic pads are formulated for stable friction, low dust, and fade resistance
- Pads are post-cured, scorched, and paired with rubber-steel-rubber shims for improved noise control
- GEOSPEC rotors use a silver-gray protective coating to resist rust and arrive dry, ready to install
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel construction
Product Details
DFC 3000 Ceramic Brake Pads are engineered for passenger cars and light-duty trucks, with consistent braking across a wide temperature range. The pad material is post-cured for stable performance and scorched to reduce initial break-in time. DFC also uses premium shims to help reduce noise, vibration, and harshness on daily-driven vehicles such as the Honda Civic, Acura ILX, Acura CSX, and Honda Prelude.
The GEOSPEC coated rotors are made to OE-style G3000/G11H18 cast iron specifications and machined to tight tolerances with a non-directional finish for smoother pad bedding and quieter stops. The coating helps protect against rust, and the rotors are shipped dry so they are ready for installation without extra cleaning. Part number 4312-59017 is a practical rear brake solution for drivers replacing worn components on these applications.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues This Kit Can Address
- Rear brake noise from worn pads or fatigued hardware
- Uneven or premature pad wear caused by corroded brake hardware
- Reduced stopping performance from worn rear rotors and pads
- Brake vibration or rough pedal feel from rotor wear
- Rust buildup on exposed rotor surfaces
Installation Notes
Verify rear fitment by year, make, and model before ordering. This kit is listed for rear applications only, including 2006-2015 Honda Civic rear brake service, 2013-2015 Acura ILX rear brake replacement, 2006-2007 Acura CSX rear brake service, and 1997-2001 Honda Prelude rear brake repair. Clean hub surfaces before installation, follow proper torque procedures, and complete a full brake inspection after installation.
Quality Assurance
DFC rotors are 100% inspected for critical dimensions and balance, and each rotor is covered by a 12-month warranty against defects in material and workmanship. The brake pads are post-cured for stable friction performance, and the hardware kit is built to OE-style form, fit, and function standards.
Rear Brake Kit for Civic, ILX, CSX, Prelude
The Dynamite Friction DFC GEOSPEC Coated Rotors with 3000 Ceramic Brake Pads and Hardware Kit, part number 4312-59017, is a rear disc brake service kit built for select Honda and Acura applications. It combines coated rotors, ceramic pads, and brake hardware components in one package for a complete rear brake refresh.
Key Features
- Rear disc brake kit with GEOSPEC coated rotors, 3000 ceramic pads, and hardware kit
- Fits 2013-2015 Acura ILX, rear
- Fits 2006-2015 Honda Civic, rear
- Fits 2006-2007 Acura CSX, rear
- Fits 1997-2001 Honda Prelude, rear
- DFC 3000 ceramic pads are formulated for stable friction, low dust, and fade resistance
- Pads are post-cured, scorched, and paired with rubber-steel-rubber shims for improved noise control
- GEOSPEC rotors use a silver-gray protective coating to resist rust and arrive dry, ready to install
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel construction
Product Details
DFC 3000 Ceramic Brake Pads are engineered for passenger cars and light-duty trucks, with consistent braking across a wide temperature range. The pad material is post-cured for stable performance and scorched to reduce initial break-in time. DFC also uses premium shims to help reduce noise, vibration, and harshness on daily-driven vehicles such as the Honda Civic, Acura ILX, Acura CSX, and Honda Prelude.
The GEOSPEC coated rotors are made to OE-style G3000/G11H18 cast iron specifications and machined to tight tolerances with a non-directional finish for smoother pad bedding and quieter stops. The coating helps protect against rust, and the rotors are shipped dry so they are ready for installation without extra cleaning. Part number 4312-59017 is a practical rear brake solution for drivers replacing worn components on these applications.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues This Kit Can Address
- Rear brake noise from worn pads or fatigued hardware
- Uneven or premature pad wear caused by corroded brake hardware
- Reduced stopping performance from worn rear rotors and pads
- Brake vibration or rough pedal feel from rotor wear
- Rust buildup on exposed rotor surfaces
Installation Notes
Verify rear fitment by year, make, and model before ordering. This kit is listed for rear applications only, including 2006-2015 Honda Civic rear brake service, 2013-2015 Acura ILX rear brake replacement, 2006-2007 Acura CSX rear brake service, and 1997-2001 Honda Prelude rear brake repair. Clean hub surfaces before installation, follow proper torque procedures, and complete a full brake inspection after installation.
Quality Assurance
DFC rotors are 100% inspected for critical dimensions and balance, and each rotor is covered by a 12-month warranty against defects in material and workmanship. The brake pads are post-cured for stable friction performance, and the hardware kit is built to OE-style form, fit, and function standards.
Description
Rear Brake Kit for Civic, ILX, CSX, Prelude
The Dynamite Friction DFC GEOSPEC Coated Rotors with 3000 Ceramic Brake Pads and Hardware Kit, part number 4312-59017, is a rear disc brake service kit built for select Honda and Acura applications. It combines coated rotors, ceramic pads, and brake hardware components in one package for a complete rear brake refresh.
Key Features
- Rear disc brake kit with GEOSPEC coated rotors, 3000 ceramic pads, and hardware kit
- Fits 2013-2015 Acura ILX, rear
- Fits 2006-2015 Honda Civic, rear
- Fits 2006-2007 Acura CSX, rear
- Fits 1997-2001 Honda Prelude, rear
- DFC 3000 ceramic pads are formulated for stable friction, low dust, and fade resistance
- Pads are post-cured, scorched, and paired with rubber-steel-rubber shims for improved noise control
- GEOSPEC rotors use a silver-gray protective coating to resist rust and arrive dry, ready to install
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel construction
Product Details
DFC 3000 Ceramic Brake Pads are engineered for passenger cars and light-duty trucks, with consistent braking across a wide temperature range. The pad material is post-cured for stable performance and scorched to reduce initial break-in time. DFC also uses premium shims to help reduce noise, vibration, and harshness on daily-driven vehicles such as the Honda Civic, Acura ILX, Acura CSX, and Honda Prelude.
The GEOSPEC coated rotors are made to OE-style G3000/G11H18 cast iron specifications and machined to tight tolerances with a non-directional finish for smoother pad bedding and quieter stops. The coating helps protect against rust, and the rotors are shipped dry so they are ready for installation without extra cleaning. Part number 4312-59017 is a practical rear brake solution for drivers replacing worn components on these applications.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues This Kit Can Address
- Rear brake noise from worn pads or fatigued hardware
- Uneven or premature pad wear caused by corroded brake hardware
- Reduced stopping performance from worn rear rotors and pads
- Brake vibration or rough pedal feel from rotor wear
- Rust buildup on exposed rotor surfaces
Installation Notes
Verify rear fitment by year, make, and model before ordering. This kit is listed for rear applications only, including 2006-2015 Honda Civic rear brake service, 2013-2015 Acura ILX rear brake replacement, 2006-2007 Acura CSX rear brake service, and 1997-2001 Honda Prelude rear brake repair. Clean hub surfaces before installation, follow proper torque procedures, and complete a full brake inspection after installation.
Quality Assurance
DFC rotors are 100% inspected for critical dimensions and balance, and each rotor is covered by a 12-month warranty against defects in material and workmanship. The brake pads are post-cured for stable friction performance, and the hardware kit is built to OE-style form, fit, and function standards.
