Dynamite Friction 4312-45019 Disc Brake Kit - Front
Front Brake Kit for Encore and Trax
The Dynamite Friction DFC GEOSPEC Coated Rotors with 3000 Ceramic Brake Pads and Hardware Kit, part number 4312-45019, is a front disc brake service kit for select Buick Encore and Chevrolet Trax models. It combines coated rotors, ceramic pads, and brake hardware components in one package for a complete front brake refresh.
Key Features
- Fits 2013-2017 Buick Encore, front
- Fits 2013-2017 Chevrolet Trax, front
- DFC 3000 ceramic pads for stable friction, low dust, and fade resistance
- Post-cured and scorched pad material for consistent initial braking
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- GeoSpec coated rotors with a silver-gray finish that resists rust better than conventional paint or zinc coatings
- Dry-shipped rotors ready for installation without oil removal
- Non-directional rotor finish for smoother pad bed-in and quieter stops
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
Product Details
Part number 4312-45019 is built for drivers servicing the front brakes on a 2013-2017 Buick Encore or 2013-2017 Chevrolet Trax. The DFC 3000 ceramic pad formulation is designed for passenger vehicles and light-duty trucks, with consistent friction across a wide temperature range and reduced dust output. The pads are post-cured and scorched to reduce break-in time and improve stopping response from the first stop. The DFC GEOSPEC rotors use G3000/G11H18 cast iron and are machined to OE-style tolerances, then finished with a non-directional surface for even pad contact. The included hardware kit is engineered to restore proper spring tension and caliper movement where worn or corroded hardware can cause noise and uneven wear. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues This Kit Can Address
- Brake noise from worn or corroded hardware
- Uneven pad wear caused by fatigued caliper hardware
- Rust buildup on exposed rotor surfaces
- Excessive brake dust from older pad compounds
- Reduced stopping consistency from worn front brake components
Installation Notes
Use this kit for front axle brake service on the listed Buick Encore and Chevrolet Trax applications. The rotors are shipped dry and ready to install, which reduces prep time during brake work. Clean all mating surfaces, inspect calipers and slides, and follow proper torque and bedding procedures after installation to help the pads and rotors seat evenly.
Quality Assurance
Each DFC GEOSPEC rotor is 100% inspected for critical dimensions and balance, with vented rotors corrected as needed during the balancing process. The rotors are covered by a 12-month warranty against defects in material and workmanship.
Front Brake Kit for Encore and Trax
The Dynamite Friction DFC GEOSPEC Coated Rotors with 3000 Ceramic Brake Pads and Hardware Kit, part number 4312-45019, is a front disc brake service kit for select Buick Encore and Chevrolet Trax models. It combines coated rotors, ceramic pads, and brake hardware components in one package for a complete front brake refresh.
Key Features
- Fits 2013-2017 Buick Encore, front
- Fits 2013-2017 Chevrolet Trax, front
- DFC 3000 ceramic pads for stable friction, low dust, and fade resistance
- Post-cured and scorched pad material for consistent initial braking
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- GeoSpec coated rotors with a silver-gray finish that resists rust better than conventional paint or zinc coatings
- Dry-shipped rotors ready for installation without oil removal
- Non-directional rotor finish for smoother pad bed-in and quieter stops
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
Product Details
Part number 4312-45019 is built for drivers servicing the front brakes on a 2013-2017 Buick Encore or 2013-2017 Chevrolet Trax. The DFC 3000 ceramic pad formulation is designed for passenger vehicles and light-duty trucks, with consistent friction across a wide temperature range and reduced dust output. The pads are post-cured and scorched to reduce break-in time and improve stopping response from the first stop. The DFC GEOSPEC rotors use G3000/G11H18 cast iron and are machined to OE-style tolerances, then finished with a non-directional surface for even pad contact. The included hardware kit is engineered to restore proper spring tension and caliper movement where worn or corroded hardware can cause noise and uneven wear. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues This Kit Can Address
- Brake noise from worn or corroded hardware
- Uneven pad wear caused by fatigued caliper hardware
- Rust buildup on exposed rotor surfaces
- Excessive brake dust from older pad compounds
- Reduced stopping consistency from worn front brake components
Installation Notes
Use this kit for front axle brake service on the listed Buick Encore and Chevrolet Trax applications. The rotors are shipped dry and ready to install, which reduces prep time during brake work. Clean all mating surfaces, inspect calipers and slides, and follow proper torque and bedding procedures after installation to help the pads and rotors seat evenly.
Quality Assurance
Each DFC GEOSPEC rotor is 100% inspected for critical dimensions and balance, with vented rotors corrected as needed during the balancing process. The rotors are covered by a 12-month warranty against defects in material and workmanship.
Original: $205.34
-65%$205.34
$71.87Description
Front Brake Kit for Encore and Trax
The Dynamite Friction DFC GEOSPEC Coated Rotors with 3000 Ceramic Brake Pads and Hardware Kit, part number 4312-45019, is a front disc brake service kit for select Buick Encore and Chevrolet Trax models. It combines coated rotors, ceramic pads, and brake hardware components in one package for a complete front brake refresh.
Key Features
- Fits 2013-2017 Buick Encore, front
- Fits 2013-2017 Chevrolet Trax, front
- DFC 3000 ceramic pads for stable friction, low dust, and fade resistance
- Post-cured and scorched pad material for consistent initial braking
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- GeoSpec coated rotors with a silver-gray finish that resists rust better than conventional paint or zinc coatings
- Dry-shipped rotors ready for installation without oil removal
- Non-directional rotor finish for smoother pad bed-in and quieter stops
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
Product Details
Part number 4312-45019 is built for drivers servicing the front brakes on a 2013-2017 Buick Encore or 2013-2017 Chevrolet Trax. The DFC 3000 ceramic pad formulation is designed for passenger vehicles and light-duty trucks, with consistent friction across a wide temperature range and reduced dust output. The pads are post-cured and scorched to reduce break-in time and improve stopping response from the first stop. The DFC GEOSPEC rotors use G3000/G11H18 cast iron and are machined to OE-style tolerances, then finished with a non-directional surface for even pad contact. The included hardware kit is engineered to restore proper spring tension and caliper movement where worn or corroded hardware can cause noise and uneven wear. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues This Kit Can Address
- Brake noise from worn or corroded hardware
- Uneven pad wear caused by fatigued caliper hardware
- Rust buildup on exposed rotor surfaces
- Excessive brake dust from older pad compounds
- Reduced stopping consistency from worn front brake components
Installation Notes
Use this kit for front axle brake service on the listed Buick Encore and Chevrolet Trax applications. The rotors are shipped dry and ready to install, which reduces prep time during brake work. Clean all mating surfaces, inspect calipers and slides, and follow proper torque and bedding procedures after installation to help the pads and rotors seat evenly.
Quality Assurance
Each DFC GEOSPEC rotor is 100% inspected for critical dimensions and balance, with vented rotors corrected as needed during the balancing process. The rotors are covered by a 12-month warranty against defects in material and workmanship.
