Dynamite Friction 4312-13003 Disc Brake Kit - Rear
Rear Brake Kit for Subaru Legacy and Impreza
Dynamite Friction DFC GEOSPEC Coated Rotors with 3000 Ceramic Brake Pads and Hardware Kit, part number 4312-13003, is a rear disc brake service kit for select Subaru Legacy and Subaru Impreza applications. It combines coated rotors, ceramic pads, and matching brake hardware for a complete rear brake refresh.
Key Features
- DFC 3000 ceramic brake pads for passenger cars and light-duty trucks
- Low-dust friction formulation with stable braking across a wide temperature range
- Post-cured and scorched pads to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- GeoSpec coated rotors with a silver-gray finish that resists rust better than conventional paint or zinc coatings
- Dry-packed rotors that are ready to install without additional cleaning
- Non-directional rotor finish for smoother pad bed-in and quieter stops
- Brake hardware built with PTFE coating, vulcanized rubber, and stainless steel
Product Details
The 4312-13003 brake kit is built around DFC GEOSPEC coated rotors and DFC 3000 ceramic pads to restore rear braking performance on Subaru Legacy and Subaru Impreza models. The rotors are machined to tight tolerances, finished for even pad contact, and inspected for balance and critical dimensions. The pads are formulated for consistent friction, reduced dust, and dependable stopping response, while the included hardware addresses worn or corroded brake clips and related components that can contribute to noise and uneven wear.
This part number, 4312-13003, is a practical choice for drivers searching for a rear brake kit for 1990-1999 Subaru Legacy or a rear disc brake kit for 1993-1998 Subaru Impreza. It is also a fitment-based option for shoppers looking for Subaru Legacy rear brake rotors and pads with hardware in one application-specific package.
What It Helps Address
- Brake noise caused by worn rear hardware or pad movement
- Uneven rear pad wear from fatigued or corroded clips
- Rust buildup on exposed rotor surfaces
- Excess brake dust from older pad materials
- Reduced stopping consistency from worn rear brake components
Installation Notes
Compatible With rear brake service on 1990-1994 Subaru Legacy, 1995-1999 Subaru Legacy, 1993-1996 Subaru Impreza, and 1998 Subaru Impreza built to 6/98. Verify rear axle fitment and production date before ordering, especially for the 1998 Subaru Impreza application. The dry rotor finish is ready for installation, and the pad surface is prepared to reduce the need for extended break-in.
- Fits 1990-1994 Subaru Legacy, rear
- Fits 1995-1999 Subaru Legacy, rear
- Fits 1993-1996 Subaru Impreza, rear
- Fits 1998 Subaru Impreza, rear, vehicle production date to 6/98
Quality Assurance
DFC GEOSPEC rotors are manufactured to OE-style specifications using G3000/G11H18 cast iron, then inspected for balance and critical dimensions before release. Each rotor includes a 12-month warranty against defects in material and workmanship. DFC 3000 pads are post-cured and scorched for stable friction performance, and the hardware kit is engineered for form, fit, and function consistent with original equipment requirements.
Rear Brake Kit for Subaru Legacy and Impreza
Dynamite Friction DFC GEOSPEC Coated Rotors with 3000 Ceramic Brake Pads and Hardware Kit, part number 4312-13003, is a rear disc brake service kit for select Subaru Legacy and Subaru Impreza applications. It combines coated rotors, ceramic pads, and matching brake hardware for a complete rear brake refresh.
Key Features
- DFC 3000 ceramic brake pads for passenger cars and light-duty trucks
- Low-dust friction formulation with stable braking across a wide temperature range
- Post-cured and scorched pads to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- GeoSpec coated rotors with a silver-gray finish that resists rust better than conventional paint or zinc coatings
- Dry-packed rotors that are ready to install without additional cleaning
- Non-directional rotor finish for smoother pad bed-in and quieter stops
- Brake hardware built with PTFE coating, vulcanized rubber, and stainless steel
Product Details
The 4312-13003 brake kit is built around DFC GEOSPEC coated rotors and DFC 3000 ceramic pads to restore rear braking performance on Subaru Legacy and Subaru Impreza models. The rotors are machined to tight tolerances, finished for even pad contact, and inspected for balance and critical dimensions. The pads are formulated for consistent friction, reduced dust, and dependable stopping response, while the included hardware addresses worn or corroded brake clips and related components that can contribute to noise and uneven wear.
This part number, 4312-13003, is a practical choice for drivers searching for a rear brake kit for 1990-1999 Subaru Legacy or a rear disc brake kit for 1993-1998 Subaru Impreza. It is also a fitment-based option for shoppers looking for Subaru Legacy rear brake rotors and pads with hardware in one application-specific package.
What It Helps Address
- Brake noise caused by worn rear hardware or pad movement
- Uneven rear pad wear from fatigued or corroded clips
- Rust buildup on exposed rotor surfaces
- Excess brake dust from older pad materials
- Reduced stopping consistency from worn rear brake components
Installation Notes
Compatible With rear brake service on 1990-1994 Subaru Legacy, 1995-1999 Subaru Legacy, 1993-1996 Subaru Impreza, and 1998 Subaru Impreza built to 6/98. Verify rear axle fitment and production date before ordering, especially for the 1998 Subaru Impreza application. The dry rotor finish is ready for installation, and the pad surface is prepared to reduce the need for extended break-in.
- Fits 1990-1994 Subaru Legacy, rear
- Fits 1995-1999 Subaru Legacy, rear
- Fits 1993-1996 Subaru Impreza, rear
- Fits 1998 Subaru Impreza, rear, vehicle production date to 6/98
Quality Assurance
DFC GEOSPEC rotors are manufactured to OE-style specifications using G3000/G11H18 cast iron, then inspected for balance and critical dimensions before release. Each rotor includes a 12-month warranty against defects in material and workmanship. DFC 3000 pads are post-cured and scorched for stable friction performance, and the hardware kit is engineered for form, fit, and function consistent with original equipment requirements.
Description
Rear Brake Kit for Subaru Legacy and Impreza
Dynamite Friction DFC GEOSPEC Coated Rotors with 3000 Ceramic Brake Pads and Hardware Kit, part number 4312-13003, is a rear disc brake service kit for select Subaru Legacy and Subaru Impreza applications. It combines coated rotors, ceramic pads, and matching brake hardware for a complete rear brake refresh.
Key Features
- DFC 3000 ceramic brake pads for passenger cars and light-duty trucks
- Low-dust friction formulation with stable braking across a wide temperature range
- Post-cured and scorched pads to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- GeoSpec coated rotors with a silver-gray finish that resists rust better than conventional paint or zinc coatings
- Dry-packed rotors that are ready to install without additional cleaning
- Non-directional rotor finish for smoother pad bed-in and quieter stops
- Brake hardware built with PTFE coating, vulcanized rubber, and stainless steel
Product Details
The 4312-13003 brake kit is built around DFC GEOSPEC coated rotors and DFC 3000 ceramic pads to restore rear braking performance on Subaru Legacy and Subaru Impreza models. The rotors are machined to tight tolerances, finished for even pad contact, and inspected for balance and critical dimensions. The pads are formulated for consistent friction, reduced dust, and dependable stopping response, while the included hardware addresses worn or corroded brake clips and related components that can contribute to noise and uneven wear.
This part number, 4312-13003, is a practical choice for drivers searching for a rear brake kit for 1990-1999 Subaru Legacy or a rear disc brake kit for 1993-1998 Subaru Impreza. It is also a fitment-based option for shoppers looking for Subaru Legacy rear brake rotors and pads with hardware in one application-specific package.
What It Helps Address
- Brake noise caused by worn rear hardware or pad movement
- Uneven rear pad wear from fatigued or corroded clips
- Rust buildup on exposed rotor surfaces
- Excess brake dust from older pad materials
- Reduced stopping consistency from worn rear brake components
Installation Notes
Compatible With rear brake service on 1990-1994 Subaru Legacy, 1995-1999 Subaru Legacy, 1993-1996 Subaru Impreza, and 1998 Subaru Impreza built to 6/98. Verify rear axle fitment and production date before ordering, especially for the 1998 Subaru Impreza application. The dry rotor finish is ready for installation, and the pad surface is prepared to reduce the need for extended break-in.
- Fits 1990-1994 Subaru Legacy, rear
- Fits 1995-1999 Subaru Legacy, rear
- Fits 1993-1996 Subaru Impreza, rear
- Fits 1998 Subaru Impreza, rear, vehicle production date to 6/98
Quality Assurance
DFC GEOSPEC rotors are manufactured to OE-style specifications using G3000/G11H18 cast iron, then inspected for balance and critical dimensions before release. Each rotor includes a 12-month warranty against defects in material and workmanship. DFC 3000 pads are post-cured and scorched for stable friction performance, and the hardware kit is engineered for form, fit, and function consistent with original equipment requirements.
