Dynamite Friction 4302-75029 Disc Brake Kit - Rear
Rear Brake Kit for Lexus NX300 and NX300h
Dynamite Friction DFC GEOSPEC Rotors with 3000 Ceramic Brake Pads, part number 4302-75029, is a rear disc brake kit built for select Lexus crossover applications. It combines coated rotors and low-dust ceramic pads for consistent stopping performance, quieter operation, and easier service.
Compatible With 2015-2021 Lexus NX300h rear, 2015-2017 Lexus NX200t rear, and 2018-2021 Lexus NX300 rear. This kit is a direct-fit service solution for rear brake replacement on these vehicles.
Key Features
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 3000 Ceramic Brake Pads for low dust and stable friction across a wide temperature range
- Post-cured and scorched pads for consistent initial bite and reduced break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Dry-processed rotors that are ready to install without oil removal
- Non-directional rotor finish for smoother pad bed-in and quieter braking
- Part number 4302-75029 for rear brake service on select Lexus models
Product Details
The DFC GEOSPEC rotor and 3000 Ceramic pad combination is engineered for drivers who want a complete rear brake refresh with OE-style fit and finish. The rotors use G3000/G11H18 cast iron and are machined to tight tolerances, then finished with a non-directional surface to support even pad contact. The coated surface helps resist rust better than conventional paint or zinc finishes, while the dry packaging simplifies installation. On the friction side, the ceramic pads are formulated for passenger vehicles and light-duty trucks, with low copper content to meet current California and Washington requirements.
For Lexus NX300, NX300h, and NX200t rear brake service, part number 4302-75029 provides a matched rotor-and-pad package designed to restore braking feel and reduce common wear-related noise and dust issues.
What This Brake Kit Helps Address
- Rear brake noise during stops
- Excess brake dust on wheels
- Rust buildup on rotor surfaces
- Uneven or rough braking feel
- Reduced stopping performance from worn rear components
Installation Notes and Tips
Verify rear axle fitment before ordering and match the vehicle application exactly. Clean the rotor friction surfaces only if needed during handling, and follow standard brake service procedures for pad bedding after installation. Because the rotors are shipped dry and ready to install, no oil removal step is required before service.
Quality Assurance
Each rotor is 100% inspected for critical dimensions and balance, with vented rotors corrected as needed during the balancing process. DFC states that every rotor is checked against OE specifications, and the rotors carry a 12-month warranty against defects in material and workmanship. Part number 4302-75029 is built as a complete rear brake service kit for consistent results on the listed Lexus applications.
Rear Brake Kit for Lexus NX300 and NX300h
Dynamite Friction DFC GEOSPEC Rotors with 3000 Ceramic Brake Pads, part number 4302-75029, is a rear disc brake kit built for select Lexus crossover applications. It combines coated rotors and low-dust ceramic pads for consistent stopping performance, quieter operation, and easier service.
Compatible With 2015-2021 Lexus NX300h rear, 2015-2017 Lexus NX200t rear, and 2018-2021 Lexus NX300 rear. This kit is a direct-fit service solution for rear brake replacement on these vehicles.
Key Features
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 3000 Ceramic Brake Pads for low dust and stable friction across a wide temperature range
- Post-cured and scorched pads for consistent initial bite and reduced break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Dry-processed rotors that are ready to install without oil removal
- Non-directional rotor finish for smoother pad bed-in and quieter braking
- Part number 4302-75029 for rear brake service on select Lexus models
Product Details
The DFC GEOSPEC rotor and 3000 Ceramic pad combination is engineered for drivers who want a complete rear brake refresh with OE-style fit and finish. The rotors use G3000/G11H18 cast iron and are machined to tight tolerances, then finished with a non-directional surface to support even pad contact. The coated surface helps resist rust better than conventional paint or zinc finishes, while the dry packaging simplifies installation. On the friction side, the ceramic pads are formulated for passenger vehicles and light-duty trucks, with low copper content to meet current California and Washington requirements.
For Lexus NX300, NX300h, and NX200t rear brake service, part number 4302-75029 provides a matched rotor-and-pad package designed to restore braking feel and reduce common wear-related noise and dust issues.
What This Brake Kit Helps Address
- Rear brake noise during stops
- Excess brake dust on wheels
- Rust buildup on rotor surfaces
- Uneven or rough braking feel
- Reduced stopping performance from worn rear components
Installation Notes and Tips
Verify rear axle fitment before ordering and match the vehicle application exactly. Clean the rotor friction surfaces only if needed during handling, and follow standard brake service procedures for pad bedding after installation. Because the rotors are shipped dry and ready to install, no oil removal step is required before service.
Quality Assurance
Each rotor is 100% inspected for critical dimensions and balance, with vented rotors corrected as needed during the balancing process. DFC states that every rotor is checked against OE specifications, and the rotors carry a 12-month warranty against defects in material and workmanship. Part number 4302-75029 is built as a complete rear brake service kit for consistent results on the listed Lexus applications.
Original: $122.47
-65%$122.47
$42.86Description
Rear Brake Kit for Lexus NX300 and NX300h
Dynamite Friction DFC GEOSPEC Rotors with 3000 Ceramic Brake Pads, part number 4302-75029, is a rear disc brake kit built for select Lexus crossover applications. It combines coated rotors and low-dust ceramic pads for consistent stopping performance, quieter operation, and easier service.
Compatible With 2015-2021 Lexus NX300h rear, 2015-2017 Lexus NX200t rear, and 2018-2021 Lexus NX300 rear. This kit is a direct-fit service solution for rear brake replacement on these vehicles.
Key Features
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 3000 Ceramic Brake Pads for low dust and stable friction across a wide temperature range
- Post-cured and scorched pads for consistent initial bite and reduced break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Dry-processed rotors that are ready to install without oil removal
- Non-directional rotor finish for smoother pad bed-in and quieter braking
- Part number 4302-75029 for rear brake service on select Lexus models
Product Details
The DFC GEOSPEC rotor and 3000 Ceramic pad combination is engineered for drivers who want a complete rear brake refresh with OE-style fit and finish. The rotors use G3000/G11H18 cast iron and are machined to tight tolerances, then finished with a non-directional surface to support even pad contact. The coated surface helps resist rust better than conventional paint or zinc finishes, while the dry packaging simplifies installation. On the friction side, the ceramic pads are formulated for passenger vehicles and light-duty trucks, with low copper content to meet current California and Washington requirements.
For Lexus NX300, NX300h, and NX200t rear brake service, part number 4302-75029 provides a matched rotor-and-pad package designed to restore braking feel and reduce common wear-related noise and dust issues.
What This Brake Kit Helps Address
- Rear brake noise during stops
- Excess brake dust on wheels
- Rust buildup on rotor surfaces
- Uneven or rough braking feel
- Reduced stopping performance from worn rear components
Installation Notes and Tips
Verify rear axle fitment before ordering and match the vehicle application exactly. Clean the rotor friction surfaces only if needed during handling, and follow standard brake service procedures for pad bedding after installation. Because the rotors are shipped dry and ready to install, no oil removal step is required before service.
Quality Assurance
Each rotor is 100% inspected for critical dimensions and balance, with vented rotors corrected as needed during the balancing process. DFC states that every rotor is checked against OE specifications, and the rotors carry a 12-month warranty against defects in material and workmanship. Part number 4302-75029 is built as a complete rear brake service kit for consistent results on the listed Lexus applications.
